EN IEC 62832-2:2020

Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements

IEC 62832-2:2020 specifies detailed requirements for model elements of the Digital Factory framework. It defines the nature of the information provided by the model elements, but not the format of this information.

Industrielle Automatisierungs- und Leittechnik - Grundstruktur der digitalen Fabrik - Teil 2: Modellelemente

Mesure, commande et automation dans les processus industriels - Cadre de l’usine numerique (digital factory) - Partie 2: Éléments de modèles

L'IEC 62832-2:2020 spécifie les exigences détaillées relatives aux éléments de modèles du cadre de l’usine numérique (Digital Factory). Elle définit la nature des informations données par les éléments de modèles, mais pas leur format.

Meritev, nadzor in avtomatizacija merilnega industrijskega procesa- Okvir za digitalno tovarno - 2. del: Elementi modela (IEC 62832-2:2020)

General Information

• Status: Published
• Publication Date: 03-Dec-2020
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/TC 65 - IEC_TC_65
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Dec-2020
• Completion Date: 04-Dec-2020
• Ref Project: SIST EN IEC 62832-2:2021 - Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements (IEC 62832-2:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2021
Meritev, nadzor in avtomatizacija merilnega industrijskega procesa- Okvir za
digitalno tovarno - 2. del: Elementi modela (IEC 62832-2:2020)
Industrial-process measurement, control and automation - Digital factory framework -
Part 2: Model elements (IEC 62832-2:2020)
Industrielle Leittechnik - Grundstruktur der digitalen Fabrik - Teil 2: Modellelemente (IEC
62832-2:2020)
Mesure, commande et automation dans les processus industriels - Cadre de l'usine
numerique (digital factory) - Partie 2: Éléments de modèles (IEC 62832-2:2020)
Ta slovenski standard je istoveten z: EN IEC 62832-2:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62832-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 25.040.40
English Version
Industrial-process measurement, control and automation - Digital
factory framework - Part 2: Model elements
(IEC 62832-2:2020)
Mesure, commande et automation dans les processus Industrielle Leittechnik - Grundstruktur der digitalen Fabrik -
industriels - Cadre de l'usine numerique (digital factory) - Teil 2: Modellelemente
Partie 2: Éléments de modèles (IEC 62832-2:2020)
(IEC 62832-2:2020)
This European Standard was approved by CENELEC on 2020-11-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62832-2:2020 E

European foreword
The text of document 65/830/FDIS, future edition 1 of IEC 62832-2, prepared by IEC/TC 65 "Industrial-
process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62832-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-08-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62832-2:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61360 (series) NOTE Harmonized as EN 61360 (series)
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61987 (series) NOTE Harmonized as EN IEC 61987 (series)
IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009 (not modified)
IEC 62569-1 NOTE Harmonized as EN 62569-1
IEC 62656-1:2014 NOTE Harmonized as EN 62656-1:2015 (not modified)
IEC 62832-3:2020 NOTE Harmonized as EN IEC 62832-3:2020 (not modified)
IEC 81346 (series) NOTE Harmonized as EN IEC 81346 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62832-1 2020 Industrial-process measurement, control EN IEC 62832-1 2020
and automation - Digital factory framework
- Part 1: General principles
ISO/IEC 6523 series Information technology - Structure for the - -
identification of organizations and
organization parts
ISO/TS 29002-5 2009 Industrial automation systems and - -
integration - Exchange of characteristic
data – Part 5: Identification scheme
IETF RFC 3986 - Uniform Resource Identifier (URI): Generic - -
Syntax
IEC 62832-2 ®
Edition 1.0 2020-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial-process measurement, control and automation – Digital factory

framework –
Part 2: Model elements
Mesure, commande et automation dans les processus industriels – Cadre de

l’usine numerique (digital factory) –

Partie 2: Éléments de modèles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40 ISBN 978-2-8322-8965-5

– 2 – IEC 62832-2:2020  IEC 2020
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Terms and definitions . 10
3.2 Abbreviated terms . 10
3.3 Conventions for representing the definition of a model element . 11
3.3.1 Convention for names . 11
3.3.2 Representation of specific DataElementTypes . 11
3.3.3 Representation of the definition of model elements . 12
3.3.4 Convention for UML notation . 13
4 Definitions of specific DataElementTypes . 13
4.1 General . 13
4.2 ConceptIdentifier . 13
4.3 DataValue . 14
4.4 DateAndTimeOfRelease . 14
4.5 Description . 15
4.6 DETcategory . 15
4.7 DFMdataType . 15
4.8 DictionarySupplierID . 16
4.9 ElementIdentifier . 16
4.10 ItemCode . 16
4.11 LetterSymbol . 17
4.12 ParentModelElement . 17
4.13 PhysicalUnit . 17
4.14 PreferredName . 18
4.15 PSassetIdentifier . 18
4.16 ReferenceToCDEL . 18
4.17 ReferenceToCDELdefinition . 19
4.18 ReferenceToDataElement . 19
4.19 ReferenceToDET . 19
4.20 ReferenceToDFasset . 20
4.21 ReferenceToDFassetClass . 20
4.22 ReferenceToDFassetClassAssociation . 20
4.23 ReferenceToDFassetClassDefinition . 21
4.24 ReferenceToGenericAssociation . 21
4.25 RoleBasedEquipmentIdentifier . 21
4.26 RuleOfRelationship . 22
4.27 SearchSpace . 22
4.28 SupplierName . 22
4.29 SynonymousName . 23
4.30 TechnicalDiscipline . 23
4.31 TimeCreated . 25
4.32 TimeStamp . 25
4.33 ValueQuality . 25
4.34 VersionIdentifier . 26

IEC 62832-2:2020  IEC 2020 – 3 –
4.35 VersionNumber . 26
5 Definitions of model elements . 26
5.1 General . 26
5.2 Model elements related to dictionaries . 26
5.2.1 ConceptDictionary . 26
5.2.2 ConceptDictionaryEntry . 28
5.2.3 Model elements related to permissible values . 30
5.3 Model elements related to DataElement . 33
5.3.1 CollectionOfDataElements (CDEL). 33
5.3.2 DataElement . 34
5.4 Model elements related to libraries . 35
5.4.1 Library . 35
5.4.2 LibraryEntry . 35
5.5 Model elements related to DigitalFactory . 43
5.5.1 DigitalFactory . 43
5.5.2 DFasset .
...