Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles

This part of IEC 62832 defines the general principles of the Digital Factory framework (DF framework), which is a set of model elements (DF reference model) and rules for modelling production systems. This DF framework defines: - a model of production system assets; - a model of relationships between different production system assets; - the flow of information about production system assets. The DF framework does not cover representation of building construction, input resources (such as raw production material, assembly parts), consumables, work pieces in process, nor end products. It applies to the three types of production processes (continuous control, batch control and discrete control) in any industrial sector (for example aeronautic industries, automotive, chemicals, wood). NOTE This document does not provide an application scenario for descriptions based on ISO 15926 (all parts), because ISO 15926 (all parts) uses a different methodology for describing production systems. The representation of a production system according to this document is managed throughout all phases of the production system life cycle (for example design, construction, operation or maintenance). The requirements and specification of software tools supporting the DF framework are out of scope of this document.

Industrielle Automatisierungs- und Leittechnik - Grundstruktur der digitalen Fabrik - Teil 1: Allgemeine Grundsätze

Mesure, commande et automation dans les processus industriels - Cadre de l’usine numérique (digital factory) - Partie 1: Principes généraux

L'IEC 62832-1:2020 définit les principes généraux du cadre de l’usine numérique (Digital Factory) (cadre DF), lequel est un ensemble d'éléments de modèles (modèle de référence DF) et de règles de modélisation des systèmes de production. Ce cadre DF définit: • un modèle d’actif du système de production; • un modèle de relations entre les différents actifs du système de production; • le flux d'informations relatives aux actifs du système de production. Le cadre DF ne couvre pas la représentation des constructions immobilières, des ressources d'entrée (les matières premières, les pièces d'assemblage, par exemple), des consommables, des pièces de fabrication ni des produits finis. Il s'applique aux trois types de processus de production (le contrôle continu, le contrôle par lots et le contrôle discret) dans tous les secteurs industriels (l'industrie aéronautique, le secteur automobile, les produits chimiques, le bois, par exemple).

Meritev, nadzor in avtomatizacija merilnega industrijskega procesa - Okvir za digitalno tovarno - 1.del: Splošna načela (IEC 62832-1:2020)

General Information

Status
Published
Publication Date
03-Dec-2020
Current Stage
6060 - Document made available - Publishing
Start Date
04-Dec-2020
Completion Date
04-Dec-2020

Buy Standard

Standard
EN IEC 62832-1:2021 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 62832-1:2020 - BARVE
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62832-1:2021
01-februar-2021
Meritev, nadzor in avtomatizacija merilnega industrijskega procesa - Okvir za
digitalno tovarno - 1.del: Splošna načela (IEC 62832-1:2020)
Industrial-process measurement, control and automation - Digital factory framework -
Part 1: General principles (IEC 62832-1:2020)
Industrielle Leittechnik - Grundstruktur der digitalen Fabrik - Teil 1: Allgemeine
Grundsätze (IEC 62832-1:2020)
Mesure, commande et automation dans les processus industriels - Cadre de l'usine
numérique (digital factory) - Partie 1: Principes généraux (IEC 62832-1:2020)
Ta slovenski standard je istoveten z: EN IEC 62832-1:2020
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN IEC 62832-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62832-1:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62832-1:2021


EUROPEAN STANDARD EN IEC 62832-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2020
ICS 25.040.40

English Version
Industrial-process measurement, control and automation - Digital
factory framework - Part 1: General principles
(IEC 62832-1:2020)
Mesure, commande et automation dans les processus Industrielle Leittechnik - Grundstruktur der digitalen Fabrik -
industriels - Cadre de l'usine numérique (digital factory) - Teil 1: Allgemeine Grundsätze
Partie 1: Principes généraux (IEC 62832-1:2020)
(IEC 62832-1:2020)
This European Standard was approved by CENELEC on 2020-11-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62832-1:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62832-1:2021
EN IEC 62832-1:2020 (E)
European foreword
The text of document 65/836/FDIS, future edition 1 of IEC 62832-1, prepared by IEC/TC 65 "Industrial-
process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62832-1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-08-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-11-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62832-1:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61360 (series) NOTE Harmonized as EN 61360 (series)
IEC 61360-1 NOTE Harmonized as EN 61360-1
IEC 61360-2 NOTE Harmonized as EN 61360-2
IEC 61987 (series) NOTE Harmonized as EN IEC 61987 (series)
IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009 (not modified)
IEC 62264 (series) NOTE Harmonized as EN 62264 (series)
IEC 62264-1:2013 NOTE Harmonized as EN 62264-1:2013 (not modified)
IEC 62264-2 NOTE Harmonized as EN 62264-2
IEC 62683 (series) NOTE Harmonized as EN 62683 (series)
ISO 11354-1:2011 NOTE Harmonized as EN ISO 11354-1:2011 (not modified)
IEC 62656 (series) NOTE Harmonized as EN IEC 62656 (series)
ISO 19439 NOTE Harmonized as EN ISO 19439
...

SLOVENSKI STANDARD
oSIST prEN 62832-1:2020
01-februar-2020
Meritve, krmiljenje in avtomatizacija v industrijskih procesih - Digitalni tovarniški
okvir - 1.del: Splošna načela
Industrial-process measurement, control and automation - Digital factory framework -
Part 1: General principles
Ta slovenski standard je istoveten z: prEN 62832-1:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
oSIST prEN 62832-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 62832-1:2020

---------------------- Page: 2 ----------------------
oSIST prEN 62832-1:2020
65/776/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62832-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2019-11-29 2020-02-21
SUPERSEDES DOCUMENTS:
65/770/RR

IEC TC 65 : INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION
SECRETARIAT: SECRETARY:
France Mr Rudy BELLIARDI
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 3D,SC 65E,SyC SM
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
THE CENELEC MEMBERS ARE INVITED TO VOTE THROUGH
THE CENELEC ONLINE VOTING SYSTEM.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Industrial-process measurement, control and automation - Digital factory framework - Part 1:
General principles

PROPOSED STABILITY DATE: 2024

NOTE FROM TC/SC OFFICERS:


Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN 62832-1:2020

---------------------- Page: 4 ----------------------
oSIST prEN 62832-1:2020
65/776/CDV – 2 – IEC CDV 62832-1  IEC:2019
CONTENTS

FOREWORD . 4
INTRODUCTION . 6
0.1 Market demand and situation . 6
0.2 History of standardization in this area . 6
0.3 Purpose and benefits of IEC 62832 . 7
0.4 Contents of the IEC 62832 series . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, abbreviated terms and conventions . 9
3.1 Terms and definitions . 9
3.2 Abbreviated terms . 12
4 Overview of the DF framework . 12
4.1 General . 12
4.2 DF reference model . 14
4.3 Use of the Digital Factory . 15
5 DF reference model . 15
5.1 Concept identifier . 15
5.2 Concept dictionary entry .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.