EN 55016-1-2:2014

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

CISPR 16-1-2:2014 specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages and currents in the frequency range 9 kHz to 1 GHz. It has the status of a basic EMC publication. Specifications for ancillary apparatus are included for artificial mains networks, current and voltage probes and coupling units for current injection on cables. It is intended that the requirements of this publication are fulfilled at all frequencies and for all levels of radio disturbance voltages and currents within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in the CISPR 16-2 series, and further information on radio disturbance is given in CISPR 16-3, while uncertainties, statistics and limit modelling are covered in the CISPR 16-4 series. This second edition cancels and replaces the first edition published in 2003 and its Amendment 1 (2004) and Amendment 2 (2006). This edition constitutes a technical revision which includes the following significant technical changes with respect to the previous edition: - requirements from CISPR 22 for the AAN have been copied to this standard; - and the CDNE for measurement of disturbance voltage in the frequency range 30 MHz to 300 MHz is added. Keywords: electromagnetic compatibility,coupling, asymetric artificial network,coupling decoupling network equipment NEW! CISPR 16-1-2:2014 is available as IEC Standards+ CISPR 16-2-1:2014 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-2: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Koppeleinrichtungen zur Messung der leitungsgeführten Störaussendung

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-2: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Dispositifs de couplage pour la mesure des perturbations conduites

La CISPR 16-1-2:2014 spécifie les caractéristiques et les performances des appareils de mesure de tensions et de courants perturbateurs radioélectriques dans la plage de fréquences comprises entre 9 kHz et 1 GHz. Elle a le statut d'une publication fondamentale en CEM. Les spécifications relatives aux matériels d'appoint sont incluses pour les réseaux fictifs, les sondes de courant et de tension et les boîtiers de couplage pour injection de courant au niveau des câbles. Il est prévu que les exigences de la présente publication satisfassent à toutes les fréquences et à tous les niveaux de tension et de courant radioélectriques perturbateurs, dans les limites de la plage de lecture des appareils de mesure de la CISPR. Les méthodes de mesure sont traitées dans la série CISPR 16-2, et des informations supplémentaires relatives aux perturbations radioélectriques sont communiquées par la série CISPR 16-3, alors que les incertitudes, les statistiques et la modélisation des limites sont fournies dans la série CISPR 16-4. Cette deuxième édition annule et remplace la première édition parue en 2003, l'Amendement 1 (2004) et l'Amendement 2 (2006). Cette édition constitue une révision technique qui inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - des exigences de la CISPR 22 relatives aux AAN ont été copiées dans la présente norme; - et le CDNE pour la mesure de la tension perturbatrice dans la gamme de fréquences de 30 MHz à 300 MHz a été ajouté. Mots clé: compatibilité electromagnétique, couplage, réseau fictif asymétrique, réseau de couplage découplage NEW! CISPR 16-1-2:2014 est disponible sous forme de IEC Standards+ CISPR 16-2-1:2014 qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 1-2. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Pomožna oprema za meritve motenj po vodnikih (CISPR 16-1-2:2014)

Standard EN 55016-1-2 določa lastnosti in zmogljivost opreme za merjenje napetosti radijskih motenj in tokov v frekvenčnem območju med 9 kHz in 1 GHz. Specifikacije za pomožno opremo so vključene za umetna električna omrežja, tokovne in napetostne sonde ter pomožne enote za tokovno-napetostni merilni postopek pri kablih. Predvideno je izpolnjevanje vseh zahtev v tej publikaciji za vse frekvence ter za vse ravni napetosti radijskih motenj in tokov v opredeljenem območju CISPR merilne opreme. Merilne metode so zajete v skupini standardov CISPR 16-2 in dodatne informacije o radijskih motnjah so navedene v skupini standardov CISPR 16-3, medtem ko so negotovosti, statistike in modeliranje z omejitvami zajete v skupini standardov CISPR 16-4.

General Information

• Status: Published
• Publication Date: 10-Jul-2014
• Withdrawal Date: 24-Apr-2017
• ICS: 33.100.10 - Emission
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jul-2014
• Completion Date: 11-Jul-2014
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 55016-1-2:2014 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

Relations

• Replaces: EN 55016-1-2:2004 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
• Effective Date: 29-Jan-2023
• Replaces: EN 55016-1-2:2004/A1:2005 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
• Effective Date: 28-Jan-2023
• Replaces: EN 55016-1-2:2004/A2:2006 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
• Effective Date: 28-Jan-2023
• Amended By: EN 55016-1-2:2014/A1:2018 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
• Effective Date: 31-May-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55016-1-2:2014
01-oktober-2014
1DGRPHãþD
SIST EN 55016-1-2:2005
SIST EN 55016-1-2:2005/A1:2005
SIST EN 55016-1-2:2005/A2:2007
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in
odpornosti - 1-2. del: Merilne naprave za merjenje radijskih motenj in odpornosti -
Pomožna oprema za meritve motenj po vodnikih (CISPR 16-1-2:2014)
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for
conducted disturbance measurements
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
1-2: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Zusatz-/Hilfseinrichtungen - Leitungsgeführte
Störaussendung
Ta slovenski standard je istoveten z: EN 55016-1-2:2014
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
SIST EN 55016-1-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55016-1-2:2014

---------------------- Page: 2 ----------------------

SIST EN 55016-1-2:2014


EUROPEAN STANDARD EN 55016-1-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 33.100.10; 33.100.20 Supersedes EN 55016-1-2:2004
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1-2: Radio disturbance and
immunity measuring apparatus - Coupling devices for conducted
disturbance measurements
(CISPR 16-1-2:2014)
Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie
des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Partie 1-2: Appareils de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-
mesure des perturbations radioélectriques et de l'immunité 2: Geräte und Einrichtungen zur Messung der
aux perturbations radioélectriques - Dispositifs de couplage hochfrequenten Störaussendung (Funkstörungen) und
pour la mesure des perturbations conduites Störfestigkeit - Koppeleinrichtungen zur Messung der
(CISPR 16-1-2:2014) leitungsgeführten Störaussendung
(CISPR 16-1-2:2014)
This European Standard was approved by CENELEC on 2014-04-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 55016-1-2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 55016-1-2:2014
EN 55016-1-2:2014 - 2 -
Foreword
The text of document CISPR/A/1051/FDIS, future edition 2 of CISPR 16-1-2, prepared by SC A
“Radio-interference measurements and statistical methods” of IEC/TC CISPR “International special
committee on radio interference” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 55016-1-2:2014.

The following dates are fixed:
• latest date by which the document has to be (dop) 2015-01-25
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-04-25
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 55016-1-2:2004.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent
...