Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance

IEC 62826:2014 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines according to IEC 60335-2-72. This standard does not apply to IEC 60312 series. The intent is to serve the manufacturers in describing parameters that fit in their manuals, and in their literature. This may include all or some of the parameters listed in this definition document. When any of the parameters listed in this document are used, they are noted as being measurements made in accordance with this document.

Oberflächenreinigungsgeräte - Bodenbehandlungsmaschinen mit oder ohne Fahrantrieb für den gewerblichen Gebrauch - Prüfverfahren zur Bestimmung der Gebrauchseigenschaften

Appareils de nettoyage de surface - Machines de traitements des sols avec ou sans commande de dispositif de déplacement, à usage commercial - Méthodes de mesure des performances

L'IEC 62826:2014 répertorie les paramètres de performances caractéristiques des brosseuses et balayeuses de sol à conducteur à pied et à conducteur porté, et d'autres appareils de nettoyage des sols conformément à l'IEC 60335-2-72. La présente norme ne s'applique pas à la série IEC 60312. Elle a pour objet de présenter aux fabricants les paramètres indiqués dans leurs manuels et documentations. Il peut s'agir de tout ou partie des paramètres figurant dans ce document de définition. Si les paramètres figurant dans le présent document sont utilisés, ils sont notés comme étant des mesures réalisées conformément au présent document.

Naprave za čiščenje površin - Stroji za obdelavo tal s pogonom ali brez njega za komercialno uporabo - Metode za merjenje lastnosti (IEC 62826:2014)

Ta mednarodni standard navaja parametre značilnosti delovanja za stroje za pranje in pometanje tal ter druge stroje za čiščenje tal, za katerimi se hodi ali se vozi na njih, v skladu s standardom IEC 60335-2-72. Ta standard se ne uporablja za skupino standardov IEC 60312. Njegov namen je pomoč proizvajalcem pri opisovanju parametrov, ki jih navajajo v svojih priročnikih in v literaturi. Sem lahko spadajo vsi ali nekateri parametri, navedeni v tem dokumentu z definicijami. Kadar se uporabi kateri koli parameter iz tega dokumenta, so zabeležijo kot meritve, izvedene v skladu s tem dokumentom.

General Information

Publication Date
Withdrawal Date
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
Completion Date


Buy Standard

EN 62826:2014
English language
28 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 62826:2014
Surface cleaning apliances - Floor treatment machines with or without traction drive, for
commercial use - Methods of measuring the performance
Ta slovenski standard je istoveten z: EN 62826:2014
97.080 Aparati za nego tal Floor treatment appliances
SIST EN 62826:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62826:2014

---------------------- Page: 2 ----------------------

SIST EN 62826:2014



October 2014
ICS 97.080

English Version
Surface cleaning appliances - Floor treatment machines with or
without traction drive, for commercial use - Methods of
measuring the performance
(IEC 62826:2014)
Appareils de nettoyage de surface - Machines de Oberflächenreinigungsgeräte -
traitements des sols avec ou sans commande de dispositif Bodenbehandlungsmaschinen mit oder ohne Antrieb für
de déplacement, à usage commercial - Méthodes de den gewerblichen Gebrauch - Prüfverfahren zur
mesure des performances Bestimmung der Gebrauchseigenschaften
(CEI 62826:2014) (IEC 62826:2014)
This European Standard was approved by CENELEC on 2014-09-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62826:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62826:2014
EN 62826:2014 - 2 -
The text of document 59F/238A/CDV, future edition 1 of IEC 62826, prepared by SC 59F "Surface
cleaning appliances" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62826:2014.

The following dates are fixed:
(dop) 2015-06-25
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-09-25
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62826:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 60312 Series NOTE Harmonized as EN 60312 Series (modified)

---------------------- Page: 4 ----------------------

SIST EN 62826:2014
- 3 - EN 62826:2014
Annex ZA

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.