iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62061:2005/A2:2015

(Amendment)

Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems

Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems

Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer, elektronischer und programmierbarer elektronischer Steuerungssysteme

Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques, électroniques et électroniques programmables relatifs à la sécurité

Varnost strojev - Funkcijska varnost na varnost vezanih električnih, elektronskih in programirljivih elektronskih krmilnih sistemov (IEC 62061:2005/A2:2015)

General Information

Status
Withdrawn
Publication Date
27-Aug-2015
Withdrawal Date
30-Jul-2018
ICS
13.110 - Safety of machinery
25.040.99 - Other industrial automation systems
29.020 - Electrical engineering in general
Technical Committee
CLC/TC 44X - Safety of machinery: electrotchnical aspects
Drafting Committee
IEC/TC 44 - IEC_TC_44
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Apr-2024
Completion Date
26-Apr-2024
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 62061:2005/A2:2016 - Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems (IEC 62061:2005/A2:2015)

Relations

Replaced By
EN IEC 62061:2021 - Safety of machinery - Functional safety of safety-related control systems
Effective Date
26-Jul-2021
Amends
EN 62061:2005 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
Effective Date
07-Jun-2022

Buy Standard

EN 62061:2005/A2:2016EN 62061:2005/A2:2016
PreviousNext
Amendment
EN 62061:2005/A2:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2016
9DUQRVWVWURMHY)XQNFLMVNDYDUQRVWQDYDUQRVWYH]DQLKHOHNWULþQLKHOHNWURQVNLKLQ
SURJUDPLUOMLYLKHOHNWURQVNLKNUPLOQLKVLVWHPRY ,(&$
Safety of machinery - Functional safety of safety-related electrical, Electronic and
programmable electronic control systems (IEC 62061:2005/A2:2015)
Sicherheit von Maschinen - Funktionale Sicherheit sicherheitsbezogener elektrischer,
elektronischer und programmierbarer elektronischer Steuerungssysteme (IEC
62061:2005/A2:2015)
Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques,
électroniques et électroniques programmables relatifs à la sécurité (IEC
62061:2005/A2:2015)
Ta slovenski standard je istoveten z: EN 62061:2005/A2:2015
ICS:
13.110 Varnost strojev Safety of machinery
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62061:2005/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 13.110; 25.040.99; 29.020
English Version
Safety of machinery - Functional safety of safety-related
electrical, Electronic and programmable electronic control
systems
(IEC 62061:2005/A2:2015)
Sécurité des machines - Sécurité fonctionnelle des Sicherheit von Maschinen - Funktionale Sicherheit
systèmes de commande électriques, électroniques et sicherheitsbezogener elektrischer, elektronischer und
électroniques programmables relatifs à la sécurité programmierbarer elektronischer Steuerungssysteme
(IEC 62061:2005/A2:2015) (IEC 62061:2005/A2:2015)
This amendment A2 modifies the European Standard EN 62061:2005; it was approved by CENELEC on 2015-07-31. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62061:2005/A2:2015 E

European foreword
The text of document 44/718/CDV, future edition 1 of IEC 62061:2005/A2, prepared by IEC TC 44 "Safety
of machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62061:2005/A2:2015.

The following dates are fixed:
• latest date by which the document has (dop) 2016-05-01
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-07-31
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of EN
62061:2005.
Endorsement notice
The text of the International Standard IEC 62061:2005/A2:2015 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Replace
Publication Year Title EN/HD Year
ISO 13849-2 -  Safety of machinery - Safety-related parts of EN ISO 13849-2 -
control systems - Part 2: Validation

Delete
Publication Year Title EN/HD Year
ISO 14121 -  Safety of machinery - Principles of risk -
assessment
IEC 62061 ®
Edition 1.0 2015-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 2
AM ENDEMENT 2
Safety of machinery – Functional safety of safety-related electrical, electronic

and programmable electronic control systems

Sécurité des machines – Sécurité fonctionnelle des systèmes de commande

électriques, électroniques et électroniques programmables relatifs à la sécurité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.110; 25.040.99; 29.020 ISBN 978-2-8322-2728-2

– 2 – IEC 62061:2005/AMD2:2015
© IEC 2015
FOREWORD
This amendment has been prepared by IEC technical committee 44: Safety of machinery –
Electrotechnical aspects.
The text of this amendment is based on the following documents:
CDV Report on voting
44/718/CDV 44/725/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
INTRODUCTION
In the fourth paragraph, replace ISO 12100-1 with ISO 12100:2010.
In the seventh paragraph, replace ISO 12100-1 with ISO 12100.
In the seventh paragraph, replace ISO 14121 (EN 1050) with ISO 12100.

Figure 1 – Relationship of IEC 62061 to other relevant standards
Re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62061:2021/A1:2024(Amendment)
Safety of machinery - Functional safety of safety-related control systems
SIST EN IEC 62061:2021/A1:2024
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 63394:2024(Main)
Safety of machinery - Guidelines on functional safety of safety-related control system
SIST-TS CLC IEC/TS 63394:2024

In the context of the safety of machinery, the sector standard IEC 62061 as well as ISO 13849 1 provide requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1. This document:  gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;  considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions; NOTE 1 IEC 62061:2021 completely covers high demand. However, other safety functions related to the protection of the machine itself and indirectly of persons are considered more in detail in this document.  gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution. Therefore, the basis for these guidelines and additional requirements is  a typical classification of safety functions;  a consideration of typical architectures used for designing safety functions;  a consideration of modes of operation of safety functions;  the derivation and evaluation of PFH formulas for subsystems considering the used technology. NOTE 2 These guidelines can also be used for application of ISO 13849-1 for the design process of SRP/CS. This document does not address low demand mode of operation according to IEC 61508. This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure. This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS. NOTE 3 The user of the machine needs information from the machine manufacturer for the safe operation of the machine, e.g. useful lifetime of components, maintenance information, testing of safety functions if necessary.

  • Technical specification
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62061:2021(Main)
Safety of machinery - Functional safety of safety-related control systems
SIST EN IEC 62061:2021

This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner. This document is a machinery sector specific standard within the framework of IEC 61508 (all parts). The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document. This is in the scope of IEC 61508 or standards linked to it; see Figure 1. NOTE 1 Elements such as systems on chip or microcontroller boards are considered complex programmable electronic subsystems. The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode. This document: - is concerned only with functional safety requirements intended to reduce the risk of hazardous situations; - is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a co-ordinated manner; NOTE 2 Requirements to mitigate risks arising from other hazards are provided in relevant sector standards. For example, where a machine(s) is part of a process activity, additional information is available in IEC 61511. This document does not cover - electrical hazards arising from the electrical control equipment itself (e.g. electric shock - see IEC 60204-1); - other safety requirements necessary at the machine level such as safeguarding; - specific measures for security aspects - see IEC TR 63074. This document is not intended to limit or inhibit technological advancement. Figure 1 illustrates the scope of this document. [Figure 1]

  • Standard
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62061:2021/A1:2024(Amendment)
Safety of machinery - Functional safety of safety-related control systems
SIST EN IEC 62061:2021/A1:2024
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 63394:2024(Main)
Safety of machinery - Guidelines on functional safety of safety-related control system
SIST-TS CLC IEC/TS 63394:2024

In the context of the safety of machinery, the sector standard IEC 62061 as well as ISO 13849 1 provide requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1. This document:  gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;  considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions; NOTE 1 IEC 62061:2021 completely covers high demand. However, other safety functions related to the protection of the machine itself and indirectly of persons are considered more in detail in this document.  gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution. Therefore, the basis for these guidelines and additional requirements is  a typical classification of safety functions;  a consideration of typical architectures used for designing safety functions;  a consideration of modes of operation of safety functions;  the derivation and evaluation of PFH formulas for subsystems considering the used technology. NOTE 2 These guidelines can also be used for application of ISO 13849-1 for the design process of SRP/CS. This document does not address low demand mode of operation according to IEC 61508. This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure. This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS. NOTE 3 The user of the machine needs information from the machine manufacturer for the safe operation of the machine, e.g. useful lifetime of components, maintenance information, testing of safety functions if necessary.

  • Technical specification
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62061:2021(Main)
Safety of machinery - Functional safety of safety-related control systems
SIST EN IEC 62061:2021

This International Standard specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner. This document is a machinery sector specific standard within the framework of IEC 61508 (all parts). The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document. This is in the scope of IEC 61508 or standards linked to it; see Figure 1. NOTE 1 Elements such as systems on chip or microcontroller boards are considered complex programmable electronic subsystems. The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode. This document: - is concerned only with functional safety requirements intended to reduce the risk of hazardous situations; - is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a co-ordinated manner; NOTE 2 Requirements to mitigate risks arising from other hazards are provided in relevant sector standards. For example, where a machine(s) is part of a process activity, additional information is available in IEC 61511. This document does not cover - electrical hazards arising from the electrical control equipment itself (e.g. electric shock - see IEC 60204-1); - other safety requirements necessary at the machine level such as safeguarding; - specific measures for security aspects - see IEC TR 63074. This document is not intended to limit or inhibit technological advancement. Figure 1 illustrates the scope of this document. [Figure 1]

  • Standard
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61535:2024(Main)
Installation couplers intended for permanent connection in fixed installations
SIST EN IEC 61535:2024

IEC 61535:2023 is available as IEC 61535:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61535:2023 applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of a definition for "live part" based on IEC 61140; b) additional optional cross medial documentation, e.g. marking with QR-Code; c) corrections on the consistent use of the expressions "earth", "earthing contact", "earthing circuit" and "protective earth(ing)" throughout the document; d) addition of missing compliance provisions to 13.3; e) update of Figure D.1 of Annex D; f) inclusion of new Annex F for cold climate requirements.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61674:2024(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
SIST EN IEC 61674:2024

IEC 61674:2024 specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in medical X-ray imaging, such as RADIOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-RADIATION with generating potentials in the range of 20 kV to 150 kV. This document is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging. IEC 61674:2024 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) for mammography, the manufacturer specifies the REFERENCE VALUE for the RADIATION QUALITY; b) for mammography, the manufacturer provides the MINIMUM RATED RANGE of RADIATION QUALITIES for the compliance test on energy dependence of response; c) the compliance test for analogue displays was removed; d) the compliance tests for range reset, the effect of leakage and recombination losses were removed. These tests are already covered by the test on linearity and cannot be conducted for modern devices. The estimation of COMBINED STANDARD UNCERTAINTY was changed accordingly; e) the compliance test for mains rechargeable and battery-operated dosimeters were updated for modern devices

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62282-8-201:2024(Main)
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
SIST EN IEC 62282-8-201:2024

IEC 62282-8-201:2024 is available as IEC 62282-8-201:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-8-201:2024 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). It specifies performance evaluation methods for electric energy storage systems using hydrogen that employ electrochemical reactions both for water and steam electrolysis and electric power generation. This document is intended for power-to-power systems which typically employ a set of electrolyser and fuel cell, or a reversible cell for devices of electric charge and discharge. This second edition cancels and replaces the first edition published in 2020. This edition includes the following significant technical changes with respect to the previous edition: a) consideration of systems connected to hydrogen supply infrastructure (hydrogen grids, vessels, caverns or pipelines); b) hydrogen input and output rate is added in the system parameters (5.10); c) electric energy storage capacity test is revised (6.2); d) roundtrip electrical efficiency test is revised (6.5); e) hydrogen input and output rate test is added (6.6.6).

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63128:2019/A1:2024(Amendment)
Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear
SIST EN IEC 63128:2019/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day