CLC/TS 50717:2022
(Main)Technical Requirements for Current Collectors for ground-level feeding system on road vehicles in operation
Technical Requirements for Current Collectors for ground-level feeding system on road vehicles in operation
This document specifies the general characteristics which are to be applied to ground level current collector devices, to enable conductive current collection by road vehicles from a feeding track integrated in the roadway. It defines the interfaces between the current collector device and its environment as well as the electrical safety concept. It also specifies the necessary tests for the current collector devices and gives recommendations for their maintenance. This document is applicable to current collector devices on road vehicles for ground-level feeding operation on electrified public roads and highways. This document is not applicable to motorcycles (including tricycles and quadricycles). This document is not applicable to vehicles or electric buses with dynamic or static inductive charging systems and related power supplies.
Technische Anforderungen an Stromabnehmer für bodennahe Einspeiseanlagen in Straßenfahrzeugen im Betrieb
Exigences techniques relatives aux capteurs de courant pour les systèmes d'alimentation au sol sur les véhicules routiers
Tehnične zahteve za tokovne odjemnike za prizemno električno napajanje za cestna vozila v obratovanju
Ta dokument določa splošne lastnosti, ki jih je treba zagotoviti tokovnim odjemnikom na tleh za odjem konduktivnih tokov s strani cestnih vozil iz napajalne tračnice, vgrajene v cestišče.
Določa vmesnike med tokovnim odjemnikom in njegovo okolico ter koncept električne varnosti.
Prav tako določa potrebne preskuse za tokovne odjemnike in navaja priporočila za njihovo vzdrževanje.
Ta dokument se uporablja za tokovne odjemnike na cestnih vozilih za talno napajanje na elektrificiranih javnih cestah in avtocestah.
Dokument se ne uporablja za motorna kolesa (vključno s trikolesnimi in štirikolesnimi vozili).
Dokument se ne uporablja za vozila ali električne avtobuse z dinamičnim ali statično induktivnim sistemom polnjenja in s tem povezanim napajanjem.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2023
Tehnične zahteve za tokovne odjemnike za prizemno električno napajanje za
cestna vozila v obratovanju
Technical Requirements for Current Collectors for ground-level feeding system on road
vehicles in operation
Technische Anforderungen an Stromabnehmer für bodennahe Einspeiseanlagen in
Straßenfahrzeugen im Betrieb
Exigences techniques relatives aux capteurs de courant pour les systèmes
d'alimentation au sol sur les véhicules routiers
Ta slovenski standard je istoveten z: CLC/TS 50717:2022
ICS:
43.120 Električna cestna vozila Electric road vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION CLC/TS 50717
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION December 2022
ICS 43.120
English Version
Technical Requirements for Current Collectors for ground-level
feeding system on road vehicles in operation
Exigences techniques relatives aux capteurs de courant Technische Anforderungen an Stromabnehmer für
pour les systèmes d'alimentation au sol sur les véhicules bodennahe Einspeiseanlagen in Straßenfahrzeugen im
routiers Betrieb
This Technical Specification was approved by CENELEC on 2022-11-07.
CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC/TS 50717:2022 E
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Abbreviations .10
5 Current collector device main characteristics .10
6 Interface requirements .11
6.1 General .11
6.2 Interface with conductive segments and feeding track (interface number 1) .11
6.3 Interface with ERS Vehicle Power supply management system (interface number 2) .11
6.4 Interface with ERS control devices (interface number 3) .12
6.5 Interface with extra-low voltage (ELV) power supply (interface number 4) .12
6.6 Interface with the vehicle chassis (interface number 5) .12
7 Technical requirements .12
7.1 General .12
7.2 Gauge .12
7.3 Working range of the current collector .12
7.4 Electrical values .13
7.5 Force requirements .13
7.6 Wearing strip .13
7.7 CCD actuator system .13
7.8 Weak link .13
7.9 Mass and force in the vehicle chassis .13
7.10 Protection against corrosion .14
7.11 Marking .14
8 Environmental requirements .14
8.1 General .14
8.2 Environmental conditions .14
8.3 Electrical disturbances .15
8.4 Noise .15
9 Operational requirements .15
9.1 Physical CCD states .15
9.2 Operational speed .17
9.3 Communication .17
10 Reliability and availability requirements .17
11 Safety requirements .17
12 Validation requirements .17
12.1 Categories of tests .17
12.2 General tests .18
12.3 Operating tests .19
12.4 Endurance tests .20
12.5 Dielectric test (Type and Routine test) .21
12.6 Sealing Test (Type Test) .21
13 Maintenance requirements .23
Annex A (informative) ERS architecture .24
General .24
A.1
A.2 ERS Traction Power Supply equipment .25
A.3 ERS On-board equipment .26
Annex B (normative) Mechanical interface between CCD and infrastructure equipment .27
B.1 General .27
B.2 Mechanical interface for type A system .27
B.3 Mechanical interface for type B system .27
B.4 Mechanical interface for type C system .28
Annex C (normative) Communication interface between CCD and infrastructure equipment .30
C.1 Communication interface for type A system .30
C.2 Communication interface for type B system .31
C.3 Communication interface for type C system .32
Bibliography .33
European foreword
This document (CLC/TS 50717:2022) has been prepared by CLC/TC 9X/WG 30 “Technical Requirements for
Current Collectors for ground-level feeding system on road vehicles in operation”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
Introduction
Road traffic borne carbon dioxide and other emissions create a growing challenge that needs to be overcome
to achieve commonly agreed climate targets.
This document is limited to current collector devices used in ground-based conductive feeding system by
contact. The dynamic electric power supply of a road vehicle is achieved by the collection of current from the
metallic segments at road level by means of one or more current collector devices installed underneath the
electric vehicle or coupled traction trailers.
As road traffic is highly internationalized and standardized, Electric Road System (ERS) solutions for dynamic
supply of vehicles need to be standardized.
The current collector device interoperability objectives are defined between countries and vehicle types, but
not between ground-based conductive feeding system technical solutions.
NOTE Annex A presents the architecture for the whole Electric Road System (ERS) for information.
1 Scope
This document specifies the general characteristics which are to be applied to ground level current collector
devices, to enable conductive current collection by road vehicles from a feeding track integrated in the
roadway.
It defines the interfaces between the current collector device and its environment as well as the electrical safety
concept.
It also specifies the necessary tests for the current collector devices and gives recommendations for their
maintenance.
This document is applicable to current collector devices on road vehicles for ground-level feeding operation
on electrified public roads and highways.
This document is not applicable to motorcycles (including tricycles and quadricycles).
This document is not applicable to vehicles or electric buses with dynamic or static inductive charging systems
and related power supplies.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 50121-1:2017, Railway applications — Electromagnetic compatibility — Part 1: general
EN 50121-2:2017, Railway applications — Electromagnetic compatibility — Part 2: Emission of the whole
railway system to the outside world
EN 50121-5:2017, Railway applications — Electromagnetic compatibility — Part 5: Emission and immunity of
fixed power supply installations and apparatus
EN 50125-1:2014, Railway applications — Environmental conditions for equipment — Part 1: Rolling stock
and on-board equipment
EN 50125-2:2002, Railway applications — Environmental conditions for equipment — Part 2: Fixed electrical
installations
EN 50126-1:2017, Railway Applications — The Specification and Demonstration of Reliability, Availability,
Maintainability and Safety (RAMS) – Part 1: Generic RAMS process
EN 50163:2004, Railway applications — Supply voltages of traction systems
EN 60529:1991, Degrees of Protection Provided by Enclosures (IP Code)
EN 61373:2010, Railway applications — Ro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.