IEC 62684:2018
(Main)Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
IEC 62684:2018 specifies the interoperability of common external power supplies for use with data-enabled mobile telephones. It defines the common charging capability and specifies interface requirements for the external power supply. Safety and EMC aspects are not covered by this document. Safety is covered by IEC 60950-1 or IEC 62368-1 and EMC is covered by regional /national standards. This document defines interoperability based on legacy USB technologies and does not cover charging interfaces that implement IEC 62680-1-3, IEC 62680-1-2 and IEC 63002. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 1 is modified to include updated references to IEC Universal Serial Bus interface standards;
b) Clause 2 is expanded to include references to IEC Universal Serial Bus interface standards;
c) Subclause 4.1 is expanded to include requirements for non USB Micro-B plug DC plug connectors;
d) Subclause 4.4 is modified to remove obsolete requirements for common mode noise and reference requirements of IEC Universal Serial Bus interface standards;
e) Subclause 4.5 is modified to reference appropriate safety standards.
Spécifications d'interopérabilité des alimentations externes (eps) communes destinées aux téléphones mobiles avec service de données
L'IEC 62684:2018 spécifie l'interopérabilité des alimentations externes communes destinées aux téléphones mobiles avec service de données. Il définit la fonctionnalité de charge commune et spécifie les exigences d'interface relatives à l'alimentation externe.
Les aspects relatifs à la sécurité et à la compatibilité électromagnétique (CEM) ne sont pas couverts par le présent document. La sécurité est couverte par l'IEC 60950-1 ou l'IEC 62368-1. La CEM est couverte par des normes régionales/nationales.
Le présent document définit l'interopérabilité avec les technologies USB antérieures et ne couvre pas les interfaces de charge qui mettent en œuvre l'IEC 62680-1-3 (câbles et connecteurs USB Type-C™), l'IEC 62680-1-2 (alimentation électrique par port USB) et l'IEC 63002.
L'IEC 62684:2018 annule et remplace la première édition parue en 2011. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) l'Article 1 a été modifié afin de mettre à jour les références vers les normes de l'IEC relatives aux interfaces de bus série universel;
b) l'Article 2 a été enrichi afin d'inclure les références vers les normes de l'IEC relatives aux interfaces de bus série universel;
c) le 4.1 a été enrichi afin d'inclure les exigences relatives aux connecteurs mâles pour courant continu non USB Micro-B;
d) le 4.4 a été modifié afin de supprimer les exigences obsolètes en matière de bruit en mode commun et de référencer les exigences des normes de l'IEC relatives aux interfaces de bus série universel;
e) le 4.5 a été modifié afin de référencer les normes de sécurité applicables.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 62684 ®
Edition 2.0 2018-02
INTERNATIONAL
STANDARD
Interoperability specifications of common external power supplies (EPS) for use
with data-enabled mobile telephones
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62684 ®
Edition 2.0 2018-02
INTERNATIONAL
STANDARD
Interoperability specifications of common external power supplies (EPS) for use
with data-enabled mobile telephones
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.200; 35.100.05; 35.200 ISBN 978-2-8322-5340-3
– 2 – IEC 62684:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 EPS specification . 6
4.1 DC plug connector specification . 6
4.2 AC input characteristic . 6
4.3 Environmental specification . 7
4.4 DC output characteristics . 7
4.5 Protection . 7
4.6 EPS detection . 7
4.7 Reliability . 7
5 Testing requirements . 7
5.1 General . 7
5.2 Ripple voltage at the DC output . 7
Bibliography . 9
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INTEROPERABILITY SPECIFICATIONS OF COMMON
EXTERNAL POWER SUPPLIES (EPS) FOR USE WITH
DATA-ENABLED MOBILE TELEPHONES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62684 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
This second edition cancels and replaces the first edition published in 2011. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Clause 1 is modified to include updated references to IEC Universal Serial Bus interface
standards;
b) Clause 2 is expanded to include references to IEC Universal Serial Bus interface
standards;
c) Subclause 4.1 is expanded to include requirements for non USB Micro-B plug DC plug
connectors;
– 4 – IEC 62684:2018 © IEC 2018
d) Subclause 4.4
...
IEC 62684 ®
Edition 2.0 2018-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Interoperability specifications of common external power supply supplies (EPS)
for use with data-enabled mobile telephones
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62684 ®
Edition 2.0 2018-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Interoperability specifications of common external power supply supplies (EPS)
for use with data-enabled mobile telephones
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.200; 35.100.05; 35.200 ISBN 978-2-8322-5377-9
– 2 – IEC 62684:2018 RLV © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 6
4 EPS specification . 6
4.1 DC plug connector specification . 6
4.2 AC input characteristic . 7
4.3 Environmental specification . 7
4.4 DC output characteristics . 7
4.5 Protection . 7
4.6 EPS detection . 8
4.7 Reliability . 8
5 Testing requirements . 9
5.1 General . 9
Common mode voltage of the DC output .
5.2 Ripple voltage at the DC output . 9
Bibliography . 11
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INTEROPERABILITY SPECIFICATIONS OF COMMON
EXTERNAL POWER SUPPLY SUPPLIES (EPS) FOR USE WITH
DATA-ENABLED MOBILE TELEPHONES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.
– 4 – IEC 62684:2018 RLV © IEC 2018
International Standard IEC 62684 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
This second edition cancels and replaces the first edition published in 2011. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Clause 1 is modified to include updated references to IEC Universal Serial Bus interface
standards;
b) Clause 2 is expanded to include references to IEC Universal Serial Bus interface
standards;
c) Subclause 4.1 is expanded to include requirements for non USB Micro-B plug DC plug
connectors;
d) Subclause 4.4 is modified to remove obsolete requirements for common mode noise and
reference requirements of IEC Universal Serial Bus interface standards;
e) Subclause 4.5 is modified to reference appropriate safety standards.
The text of this standard is based on the following documents:
CDV Report on voting
100/2872/CDV 100/2966/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
INTEROPERABILITY SPECIFICATIONS OF COMMON
EXTERNAL POWER SUPPLY SUPPLIES (EPS) FOR USE WITH
DATA-ENABLED MOBILE TELEPHONES
1 Scope
This document specifies the interoperability of common external power supplies for use with
data-enabled mobile telephones. It defines the common charging capability and specifies
interface requirements for the external power supply.
Safety and EMC aspects are not covered by this document. Safety is covered by IEC 60950-1
or IEC 62368-1 and EMC is covered by EN 301 489-34 regional /national standards.
This document defines interoperability based on legacy USB technologies and does not cover
charging interfaces that implement IEC 62680-1-3 (USB Type-C™ ), IEC 62680-1-2 (USB PD)
and IEC 63002.
NOTE: The content of this document is based on Annex II dated 12 January 2010 to the MoU regarding
Harmonisation of a Charging Capability for Mobile Phone.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60950-1:2005, Information technology equipment – Safety – Part 1: General requirements
IEC 62368-1, Audio/video, information and communication technology equipment – Part 1:
Safety requirements
IEC 62680-1-1, Universal Serial Bus interfaces for data and power – Part 1-1: Common
components – USB Battery Charging Specification, Revision 1.2
IEC 62680-2-1:2015, Universal Serial Bus interfaces for data and power – Part 2-1: Universal
Serial Bus specification, Revision 2.0
IEC 62680-2-2, Universal Serial Bus interfaces for data and power – Part 2-2: USB Micro-USB
Cables and Connectors Specification, Revision 1.01
EN 301 489-34 Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services – Part 34:
Specific conditions for External Power Supply (EPS) for mobile phones
Universal Serial Bus Specification, Cables and Connectors Class Document, Revision 2.0,
August 2007
(http://www.usb.org/developers/docs)
___________
USB Type-C™ is a trademark of the USB Implementers Forum (USB-IF). This information is given for the
convenience of users of this document and does not constitute an endorsement by IEC of this product.
– 6 – IEC 62684:2018 RLV © IEC 2018
USB Battery Charging Specification, Revision 1.1
USB Micro-USB Cables and Connectors Specification, Revision 1.01
USB-IF Cable Assembly Test Requirements for Compliant Usage of Connectors and Cables in
Micro-USB 1.01
USB-IF Connector Test Requirements
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For th
...
IEC 62684 ®
Edition 2.0 2018-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Interoperability specifications of common external power supplies (EPS) for use
with data-enabled mobile telephones
Spécifications d'interopérabilité des alimentations externes (EPS) communes
destinées aux téléphones mobiles avec service de données
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org
Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 000 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 16 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC online collection - oc.iec.ch
IEC 62684 ®
Edition 2.0 2018-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Interoperability specifications of common external power supplies (EPS) for use
with data-enabled mobile telephones
Spécifications d'interopérabilité des alimentations externes (EPS) communes
destinées aux téléphones mobiles avec service de données
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200; 35.100.05; 35.200 ISBN 978-2-8322-9256-3
– 2 – IEC 62684:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 EPS specification . 6
4.1 DC plug connector specification . 6
4.2 AC input characteristic . 6
4.3 Environmental specification . 6
4.4 DC output characteristics . 7
4.5 Protection . 7
4.6 EPS detection . 7
4.7 Reliability . 7
5 Testing requirements . 7
5.1 General . 7
5.2 Ripple voltage at the DC output . 7
Bibliography . 9
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INTEROPERABILITY SPECIFICATIONS OF COMMON
EXTERNAL POWER SUPPLIES (EPS) FOR USE WITH
DATA-ENABLED MOBILE TELEPHONES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62684 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
This second edition cancels and replaces the first edition published in 2011. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Clause 1 is modified to include updated references to IEC Universal Serial Bus interface
standards;
b) Clause 2 is expanded to include references to IEC Universal Serial Bus interface
standards;
c) Subclause 4.1 is expanded to include requirements for non USB Micro-B plug DC plug
connectors;
– 4 – IEC 62684:2018 © IEC 2018
d) Subclause 4.4 is modified to remove obsolete requirements for common mode noise and
reference requirements of IEC Universal Serial Bus interface standards;
e) Subclause 4.5 is modified to reference appropriate safety standards.
The text of this standard is based on the following documents:
CDV Report on voting
100/2872/CDV 100/2966/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
INTEROPERABILITY SPECIFICATIONS OF COMMON
EXTERNAL POWER SUPPLIES (EPS) FOR USE WITH
DATA-ENABLED MOBILE TELEPHONES
1 Scope
This document specifies the interoperability of common external power supplies for use with
data-enabled mobile telephones. It defines the common charging capability and specifies
interface requirements for the external power supply.
Safety and EMC aspects are not covered by this document. Safety is covered by IEC 60950-1
or IEC 62368-1 and EMC is covered by regional /national standards.
This document defines interoperability based on legacy USB technologies and does not cover
charging interfaces that implement IEC 62680-1-3 (USB Type-C™ ), IEC 62680-1-2 (USB PD)
and IEC 63002.
NOTE The content of this document is based on Annex II dated 12 January 2010 to the MoU regarding
Harmonisation of a Charging Capability for Mobile Phone.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.