IEC 62899-201-2:2021
(Main)Printed electronics - Part 201-2: Materials - Substrates - Measurement methods for properties of stretchable substrates
Printed electronics - Part 201-2: Materials - Substrates - Measurement methods for properties of stretchable substrates
IEC 62899-201-2:2021(E) defines measurement methods for the properties of stretchable substrates, in order to use evaluating stretchable functional layers (conductive, semiconducting, and insulating) formed by printing technologies. If the same types of materials as the substrates are used for the cover lay film, they are also subjected to the measurement defined in this document.
Stretchable substrates handled by this document apply to substrates subjected to repeated bending with wiring elements demanding a high level of performance, such as fabric integrated wearable devices or skin patchable devices.
This document does not define the required characteristics of the stretchable substrate. It provides test methods to characterize (pre-qualify) the substrates that are intended to be used for printing conductors and insulators for the purposes of manufacturing stretchable layers or structures.
General Information
Standards Content (Sample)
IEC 62899-201-2 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
colour
inside
Printed electronics –
Part 201-2: Materials – Substrates – Measurement methods for properties of
stretchable substrates
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62899-201-2 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
colour
inside
Printed electronics –
Part 201-2: Materials – Substrates – Measurement methods for properties of
stretchable substrates
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.035.01; 31.180 ISBN 978-2-8322-1036-8
– 2 – IEC 62899-201-2:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Structures and materials . 7
4.1 Structures . 7
4.2 Materials . 7
5 General description of measurement tests . 8
6 Characteristics and measurement methods of stretchable substrates . 8
6.1 Width and length of stretchable substrates . 8
6.2 Thickness of stretchable substrates . 8
6.3 Mass per unit area of stretchable fabrics . 8
6.4 Elongation at break of stretchable fabrics . 8
6.5 Volume resistance of stretchable polymer films and sheets . 8
6.6 Surface resistance of stretchable polymer films and sheets . 9
6.7 Electric strength of stretchable polymer films and sheets . 9
7 Storage . 9
8 Packing and marking . 9
9 Shipment . 9
Bibliography . 10
Table 1 – Types and schematic cross section of stretchable substrates . 8
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PRINTED ELECTRONICS –
Part 201-2: Materials – Substrates – Measurement methods
for properties of stretchable substrates
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62899-201-2 has been prepared by IEC technical committee 119:
Printed Electronics.
This International Standard is to be used in conjunction with IEC 62899-201:2016.
The text of this International Standard is based on the following documents:
Draft Report on voting
119/369/FDIS 119/375/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
– 4 – IEC 62899-201-2:2021 © IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 62899 series, published under the general title Printed electronics,
can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.