ISO 20140-5:2024
(Main)Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental performance evaluation data
Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental performance evaluation data
This document defines a set of environmental performance evaluation (EPE) data classes, including their properties.
It is applicable to entire manufacturing facilities or to parts of a manufacturing facility.
This document applies to manufacturing systems including discrete, batch and continuous control, which are defined in IEC 62264-1.
The following are outside the scope of this document:
- syntax of EPE data and data models;
- protocols to exchange EPE data;
- functions that can be enabled by the use of EPE data;
- product life cycle assessment;
- EPE data that are specific to a particular industry sector, manufacturer or machinery;
- acquisition of EPE data.
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 20140-5
Second edition
Automation systems and
2024-09
integration — Evaluating energy
efficiency and other factors of
manufacturing systems that
influence the environment —
Part 5:
Environmental performance
evaluation data
Systèmes d'automatisation et intégration — Évaluation de
l'efficacité énergétique et autres facteurs de fabrication des
systèmes qui influencent l'environnement —
Partie 5: Données d'évaluation de la performance
environnementale
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, abbreviated terms and conventions . 2
3.1 Terms and definitions .2
3.2 Abbreviated terms .4
3.3 Conventions for defining class definitions and properties .4
3.4 Value types .7
3.5 UML notation.7
4 Outline of EPE data . 9
4.1 Overview .9
4.2 EPE data, EPE data class and EPE data class definition .9
4.2.1 EPE_data .9
4.2.2 EPE data class.11
4.2.3 Descriptions of EPE data class definition . 12
4.2.4 Hierarchy of EPE data class definitions . 13
4.3 EPE_process . 13
4.3.1 Overview . 13
4.3.2 Elementary_process .14
4.3.3 Compound_process .14
4.3.4 EPE_process_transition.16
4.3.5 EPE_IO_connection .17
4.3.6 Flow_control_process . .17
4.4 EPE_input .17
4.5 EPE_output .18
4.6 EPE_mechanism .19
4.6.1 General .19
4.6.2 EPE_equipment . 20
4.6.3 EPE_space .21
4.7 EPE_control . 22
5 EPE data class definitions .22
5.1 Overview . 22
5.2 Class definition of EPE_data . 22
5.3 Class definition of Elementary_EPE_data . 23
5.3.1 General . 23
5.3.2 Class definition of Defined_EPE_data .24
5.3.3 Class definition of Measured_EPE_data .24
5.3.4 Class definition of Calculated_EPE_data .24
5.3.5 Class definition of EPE_IO_connection . 25
5.3.6 Class definition of Environmental_condition_data . 25
5.4 Class definition of Grouped_EPE_data . 25
5.4.1 General . 25
5.4.2 Class definition of EPE_process . 26
5.4.3 Class definition of EPE_input . 30
5.4.4 Class definition of EPE_output . 36
5.4.5 Class definition of EPE_mechanism . 38
5.4.6 Class definition of EPE_control.43
5.4.7 Class definition of EPE_process_transition .43
6 Properties of EPE data class definitions .44
6.1 General . 44
6.2 Definitions of property . 44
6.2.1 Air_conditioning . . . 44
iii
6.2.2 Capacity_of_buffering . 44
6.2.3 Description_of_operation_mode . 44
6.2.4 Dimension . 44
6.2.5 Distribution_ratio .45
6.2.6 Downstream_endpoint .45
6.2.7 Economic_value_of_a_product .45
6.2.8 End_time .45
6.2.9 EPE_data_granularity . 46
6.2.10 EPE_data_resolution . 46
6.2.11 EPE_process_identifier . 46
6.2.12 Formula_for_calculation . 46
6.2.13 Functional_Hierarchy_Level . . .47
6.2.14 ID_of_EPE_data_class .47
6.2.15 Identifier_of_operation_mode .47
6.2.16 Identifier_of_part . 48
6.2.17 Indoor_or_outdoor . . 48
6.2.18 Lighting_condition .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.