ISO 20140-5:2017

Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental performance evaluation data

ISO 20140-5:2017 specifies the types of environmental performance evaluation (EPE) data, including their attributes, which can be used for evaluating the environmental performance of manufacturing systems based on the general principles described in ISO 20140‑1. It also provides recommendations for mapping the EPE data on to information models specified by IEC 62264.
ISO 20140-5:2017 applies to discrete, batch and continuous manufacturing.
ISO 20140-5:2017 is applicable to entire manufacturing facilities and to parts of a manufacturing facility.
ISO 20140-5:2017 specifically excludes from its scope the syntax of the data and information models, the protocols to exchange data models, the functions that can be enabled by data models, and the activities in Level 1 and Level 2.
The scope of ISO 20140-5:2017 also includes indicating the differences among various data and information models and the differences among various representations of environmental performance by actual data.
ISO 20140-5:2017 refers to the semantics of the structured data and information models used by communication protocols. The semantics explain the meaning of the attributes and of the context information.
The following are outside the scope of ISO 20140-5:2017:
- product life cycle assessment;
- EPE data that are specific to a particular industry sector, manufacturer or machinery;
- acquisition of data;
- the activity of data communication.

General Information

• Status: Published
• Publication Date: 18-Apr-2017
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 25.040.01 - Industrial automation systems in general
• Technical Committee: TC 65 - Industrial-process measurement, control and automation
• Drafting Committee: JWG 14 - TC 65/JWG 14
• Current Stage: PPUB - Publication issued
• Start Date: 24-Apr-2017
• Completion Date: 24-Apr-2017

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 20140-5
First edition
2017-04
Automation systems and
integration — Evaluating energy
efficiency and other factors of
manufacturing systems that influence
the environment —
Part 5:
Environmental performance
evaluation data
Systèmes d’automatisation et intégration — Évaluation de l’efficacité
énergétique et autres facteurs de fabrication des systèmes qui
influencent l’environnement —
Partie 5: Données d’évaluation de la performance environnementale
Reference number
ISO 20140-5:2017(E)
©
ISO 2017

---------------------- Page: 1 ----------------------
ISO 20140-5:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 20140-5:2017(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification of EPE data . 4
4.1 EPE data context information . 4
4.2 Classification by source and time . 4
4.3 Further classification of data . 5
5 Actual data . 6
5.1 Overview . 6
5.2 Sources of actual data . 7
5.2.1 Overview . 7
5.2.2 Actual data located in Level 2 . 7
5.2.3 Actual data located in Level 3 . 7
5.2.4 Actual data located in Level 4 . 8
5.2.5 Selecting the source of actual data . 8
5.3 Actual data in operation step . 9
5.3.1 Overview .
...