IEC TR 62617:2010

Home laundry appliances - Uncertainty reporting of measurements

IEC/TR 62617:2010(E) applies to uncertainty reporting of home laundry electrical appliances. It allows to estimate the uncertainty of a measured result and to predict the range of values that may be measured when the same appliance is measured in another laboratory following the same measurement method.

General Information

• Status: Published
• Publication Date: 10-May-2010
• ICS: 27.120.20 - Nuclear power plants. Safety
• ICS: 97.060 - Laundry appliances
• Technical Committee: SC 59D - Performance of household and similar electrical laundry appliances
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 23-Nov-2015

Relations

• Revised: IEC TR 62617:2015 - Home laundry appliances - Uncertainty reporting of measurements
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC/TR 62617
®
Edition 1.0 2010-05
TECHNICAL
REPORT

Home laundry appliances – Uncertainty reporting of measurements


IEC/TR 62617:2010(E)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2010 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]

---------------------- Page: 2 ----------------------
IEC/TR 62617
®
Edition 1.0 2010-05
TECHNICAL
REPORT

Home laundry appliances – Uncertainty reporting of measurements


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 97.060 ISBN 978-2-88910-929-6
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 3 ----------------------
– 2 – TR 62617 © IEC:2010(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 The approach to uncertainty measurement .7
4.1 The importance of the uncertainty .7
4.2 Ways to access uncertainty .7
5 Expanded uncertainty calculation .8
6 Reporting uncertainty .9
7 Expanded uncertainty values.9
7.1 General .9
th
7.2 Expanded uncertainty of measurement in IEC 60456:2003, 4 edition.9
th
7.3 Expanded uncertainty of measurement in IEC 60456:2010,5 edition.10
rd
7.4 Expanded uncertainty of measurement in IEC 61121:2002, 3 edition.10
Bibliography.12

th
Table 1 – Expanded uncertainty of measured values of IEC 60456:2003, 4 Edition for
horizontal drum washing machine .10
th
Table 2 – Expanded uncertainty of measured values of IEC 60456 5 Edition .10
rd
Table 3 – Expanded uncertainty of measured values of IEC 61121:2002, 3 Edition for
condenser tumble dryers.11

---------------------- Page: 4 ----------------------
TR 62617 © IEC:2010(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

HOME LAUNDRY APPLIANCES –
UNCERTAINTY REPORTING OF MEASUREMENTS


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62617, which is a technical report, has been prepared by subcommittee 59D: Home
laundry appliances, of IEC technical committee 59: Performance of household and similar
electrical appliances.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
59D/355/DTR 59D/356/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.

---------------------- Page: 5 ----------------------
– 4 – TR 62617 © IEC:2010(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 6 ----------------------
TR 62617 © IEC:2010(E) – 5 –
INTRODUCTION
To encourage the efficient use of energy and other resources, National governments and
regional authorities have issued regulations, which mandate the provision of information to
consumers regarding the energy and water consumption of household appliances and
associated performance characteristics. This information is usually conveyed by labels
attached to appliances at the point of sale and also by brochures provided by manufacturers.
Methods for measuring declared values for energy and water consumption and performance
characteristics must be of sufficient accuracy to provide confidence to governments,
consumers and manufacturers. The accuracy of a test method is expressed in terms of bias
and precision. Precision, when evaluating test methods, is expressed in terms of two
measurement concepts: repeatability and reproducibility. Therefore, standard procedures are
required for determining the repeatability and the reproducibility of test methods developed by
technical committee 59 and its subcommittees. The repeatability of a test method must be
sufficiently accurate for comparative testing. The reproducibility of a test method must be
sufficiently accurate for the determination of values which are declared and for checking these
declared values.
Uncertainty reporting is essential to ensure measured data are interpreted in a correct way.
Especially when data of measurements are to be compared between laboratories or when
normative requirements are set up, it is necessary to know the uncertainty with which data
can be measured.

---------------------- Page: 7 ----------------------
– 6 – TR 62617 © IEC:2010(E)
HOME LAUNDRY APPLIANCES –
UNCERTAINTY REPORTING OF MEASUREMENTS



1 Scope
This Technical Report (TR) applies to uncertainty reporting of home laundry electrical
appliances.
It allows to estimate the uncertainty of a measured result and to predict the range of values
that may be measured when the same appliance is measured in another laboratory following
the same measurement method.
NOTE The provisions in this TR can also be used to evaluate other kinds of products.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
ISO/IEC Guide 98-3:
...