ISO/IEC 24739-1:2009/COR1:2013
(Corrigendum)Corrigendum 1 - Information technology - AT attachment with packet interface-7 - Part 1: Register delivered command set, logical register set (ATA/ATAPI-7 V1)
Corrigendum 1 - Information technology - AT attachment with packet interface-7 - Part 1: Register delivered command set, logical register set (ATA/ATAPI-7 V1)
Specifies the main dimensions of coil formers for transformers and inductors, using a square stack of the laminations inserted in the coil formers.
General Information
Relations
Buy Standard
Standards Content (Sample)
– 1 –
ISO/IEC 24739-1
(First edition – 2009)
Information technology – AT attachment with packet interface-7 –
Part 1: Register delivered command set, logical register set (ATA/ATAPI-7 V1)
CO RRI G E NDUM 1
5.15.1 Signature for devices not implementing the PACKET command feature set
Delete, in the existing table "PACKET command feature set", the last entry:
Device 00h
5.15.2 Signature for devices implementing the PACKET command feature set
Delete, in the existing table "PACKET command feature set", the last entry:
Device 000x0000b where x equals 0 except when responding to a
DEVICE RESET, IDENTIFY DEVICE, or READ SECTOR(S)
command. For a DEVICE RESET, IDENTIFY DEVICE, or READ
SECTOR(S) command the value of x is not changed from that
existing when the command is written to the Command register.
5.15.3 Reserved signatures for Serial ATA working groups
Replace the second sentence of the first paragraph as follows:
The use of these signatures is not defined by this standard.
6.10.4.8.6 Word 7: Command/features set supported
Replace the existing fifth paragraph of this subclause by the following:
Word 7 bit 4 is cleared to zero to d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.