iTeh Standards logo
EURUSD
Your shopping cart is empty.
IEC

IEC 62151:2000/COR2:2001

(Corrigendum)

Corrigendum 2 - Safety of equipment electrically connected to a telecommunication network

Corrigendum 2 - Safety of equipment electrically connected to a telecommunication network

Corrigendum 2 - Sécurité des matériels reliés électriquement à un réseau de télécommunications

General Information

Status
Published
Publication Date
27-Jun-2001
ICS
33.020 - Telecommunications in general
35.020 - Information technology (IT) in general
Technical Committee
TC 108 - Safety of electronic equipment within the field of audio/video, information technology and communication technology
Drafting Committee
MT 2 - TC 108/MT 2
Current Stage
PPUB - Publication issued
Start Date
28-Jun-2001
Completion Date
30-Aug-2001
Ref Project

Relations

Corrects
IEC 62151:2000 - Safety of equipment electrically connected to a telecommunication network
Effective Date
05-Sep-2023
Corrects
IEC 62151:2000/COR1:2001 - Corrigendum 1 - Safety of equipment electrically connected to a telecommunication network
Effective Date
05-Sep-2023
IEC 62151:2000/COR2:2001 - Corrigendum 2 - Safety of equipment electrically connected to a telecommunication network Released:6/28/2001IEC 62151:2000/COR2:2001 - Corrigendum 2 - Safety of equipment electrically connected to a telecommunication network Released:6/28/2001
PreviousNext
Standard
IEC 62151:2000/COR2:2001 - Corrigendum 2 - Safety of equipment electrically connected to a telecommunication network Released:6/28/2001
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CEI 62151 IEC 62151
(Première édition - 2000) (First edition – 2000)
Sécurité des matériels reliés électriquement a
Safety of equipment electrically connected to
un réseau de télécommunications
a telecommunication network
CORRIGENDUM 2
Page 22 Page 23
4.1.1, NOTE 4.1.1, NOTE
Au lieu de: Instead of:
NOTE En Finlande, Norvège et Suède, un matériel de NOTE In Finland, Norway and Sweden, class I
classe I destiné à être raccordé à la prise secteur de equipment which is intended for connection to the
l’installation électrique par une prise de courant non building installation wiring via a non-industrial plug or a
industrielle, ou un connecteur non industriel, ou les non-industrial appliance coupler, or both and in addition
deux, et qui est également destiné à être relié à un is intended for connection to other equipment or a
autre matériel ou a un réseau, et si la sécurité repose network may, if safety relies on connection to protective
sur la connexion de la mise à la terre de protection, il earth, require a marking stating that the equipment must
est nécessaire de porter sur ce matériel un marquage be connected to an earthed mains socket-outlet.
indiquant que le matériel doit être connecté à un socle
secteur mis à la terre.
lire: read:
NOTE En Finlande, Norvège et Suède, un matériel de NOTE In Finland, Norway and Sweden, class I
classe I destiné à être raccordé à la prise secteur de equipment wh
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

IEC
IEC 62151:2000/COR1:2001(Corrigendum)
Corrigendum 1 - Safety of equipment electrically connected to a telecommunication network
  • Standard
    10 pages
    English and French language
    sale 15% off
IEC
IEC 62151:2000(Main)
Safety of equipment electrically connected to a telecommunication network

IEC 62151:2000 Applicable to equipment designed and intended to be connected directly to a Telecommunication Network, regardless of the source of power. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. This standard has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC guide 51. This standard cancels and replaces IEC Guide 105 published in 1985. The contents of the corrigenda of March 2001 and June 2001 have been included in this copy.

  • Standard
    69 pages
    English and French language
    sale 15% off
IEC
IEC TR 61169-1-8:2025(Main)
Radio-frequency connectors - Part 1-8: Electrical test methods - Voltage standing wave ratio for a single connector by double connector method

IEC TR 61169-1-8:2025 provides a test method for voltage standing wave ratio (VSWR, hereinafter) of single RF connector by double-connector method. This document is applicable to single RF cable connectors and single microstrip RF connectors as well as single adapters if an estimation of the VSWR of a single completely installed RF-connector is used and a time domain feature is not available on the vector network analyzer.

  • Technical report
    18 pages
    English language
    sale 15% off
IEC
IEC 62541-100:2025(Main)
OPC unified architecture - Part 100: Devices

IEC 62541-100:2025 defines the information model associated with Devices. This document describes three models which build upon each other as follows:
• The (base) Device Model is intended to provide a unified view of devices and their hardware and software parts irrespective of the underlying device protocols.
• The Device Communication Model adds Network and Connection information elements so that communication topologies can be created.
• The Device Integration Host Model finally adds additional elements and rules required for host systems to manage integration for a complete system. It enables reflecting the topology of the automation system with the devices as well as the connecting communication networks.
This document also defines AddIns that can be used for the models in this document but also for models in other information models. They are:
• Locking model – a generic AddIn to control concurrent access,
• Software update model – an AddIn to manage software in a Device.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a a ComponentType that can be used to model any HW or SW element of a device has been defined and a SoftwareType has been added as subtype of ComponentType;
b the new OPC UA interface concept and defined interfaces for Nameplate, DeviceHealth, and SupportInfo has been added.
c) a new model for Software Update (Firmware Update) has been added;
d) a new entry point for documents where each document is represented by a FileType instance has been specified;
e) a model that provides information about the lifetime, related limits and semantic of the lifetime of things like tools, material or machines has been added.

  • Standard
    152 pages
    English language
    sale 15% off
  • Standard
    158 pages
    French language
    sale 15% off
  • Standard
    310 pages
    English and French language
    sale 15% off
IEC
IEC 62541-13:2025(Main)
OPC Unified Architecture - Part 13: Aggregates

IEC 62541-13:2025 is available as IEC 62541-13:2025 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62541-13:2025 defines the information model associated with Aggregates. Programmatically produced aggregate examples are listed in Annex A. This third edition cancels and replaces the second edition published in 2020. This edition constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition:
a) Multiple fixes for the computation of aggregates
• The Raw status bit is always set for non-bad StatusCodes for the Start and End aggregates.
• Entries in the Interpolative examples Tables A2.2 Historian1, Historian2, and Historian3 have been changed from Good to Good, Raw status codes when the timestamp matches with the timestamp of the data source.
• Missing tables have been added for DurationInStateZero and DurationInStateNonZero.
• The value of zero has been removed for results with a StatusCode of bad.
• Data Type was listed as "Status Code" when it is "Double" for both Standard Deviation and both Variance Aggregates.
• Rounding Error in TimeAverage and TimeAverage2 have been corrected.
• The status codes have been corrected for the last two intervals and the value has been corrected in the last interval.
• The wording has been changed to be more consistent with the certification testing tool.
• UsedSlopedExtrapolation set to true for Historian2 and all examples locations needed new values or status' are modified.
• Values affected by percent good and percent bad have been updated.
• PercentGood/PercentBad are now accounted for in the calculation.
• TimeAverage uses SlopedInterpolation but the Time aggregate is incorrectly allowed to used Stepped Interpolation.
• Partial bit is now correctly calculated.
• Unclear sentence was removed.
• Examples have been moved to a CSV.
• The value and status code for Historian 3 have been updated.
• TimeAverage2 Historian1 now takes uncertain regions into account when calculating StatusCodes.
• TimeAverage2 Historian2 now takes uncertain regions into account when calculating StatusCodes.
• Total2 Historian1 now takes uncertain regions into account when calculating StatusCodes
• Total2 Historian2 now takes uncertain regions into account when calculating StatusCodes
• Maximum2 Historian1 now takes uncertain regions into account when calculating StatusCodes
• MaximumActualTime2 Historian1 now takes uncertain regions into account when calculating StatusCodes
• Minimum2 Historian1 now takes uncertain regions into account when calculating StatusCodes
• MinimumActualTime2 Historian1 now has the StatusCodes calculated while using the TreatUncertainAsBad flag.
• Range2 Historian1 now looks at TreatUncertainAsBad in the calculation of the StatusCodes.
• Clarifications have been made to the text defining how PercentGood/PercentBad are used. The table values and StatusCodes of the TimeAverage2 and Total2 aggregates have been corrected.

  • Standard
    64 pages
    English language
    sale 15% off
  • Standard
    64 pages
    French language
    sale 15% off
  • Standard
    128 pages
    English and French language
    sale 15% off
IEC
IEC 62541-7:2025(Main)
OPC Unified Architecture - Part 7: Profiles

IEC 62541-7: 2025 specifies value and structure of Profiles in the OPC Unified Architecture.
OPC UA Profiles are used to segregate features with regard to testing of OPC UA products and the nature of the testing. The scope of this document includes defining functionality that can only be tested. The definition of actual TestCases is not within the scope of this document, but the general categories of TestCases are covered by this document.
Most OPC UA applications will conform to several, but not all of the Profiles.
This fourth edition cancels and replaces the third edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Profiles and ConformanceUnits are not part of this document, but are solely managed in a public database as described in Clause 1.

  • Standard
    160 pages
    English language
    sale 15% off
  • Standard
    173 pages
    French language
    sale 15% off
  • Standard
    333 pages
    English and French language
    sale 15% off
IEC
IEC 62541-4:2025(Main)
OPC unified architecture - Part 4: Services

IEC 62541-4:2025 is available as IEC 62541-4:2025 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62541-4:2025 defines the OPC Unified Architecture (OPC UA) Services. The Services defined are the collection of abstract Remote Procedure Calls (RPC) that are implemented by OPC UA Servers and called by OPC UA Clients. All interactions between OPC UA Clients and Servers occur via these Services. The defined Services are considered abstract because no particular RPC mechanism for implementation is defined in this document. IEC 62541‑6 specifies one or more concrete mappings supported for implementation. For example, one mapping in IEC 62541‑6 is to UA-TCP UA-SC UA-Binary. In that case the Services described in this document appear as OPC UA Binary encoded payload, secured with OPC UA Secure Conversation and transported via OPC UA TCP. Not all OPC UA Servers implement all of the defined Services. IEC 62541‑7 defines the Profiles that dictate which Services must be implemented in order to be compliant with a particular Profile. A BNF (Backus-Naur form) for browse path names is described in Annex A. This fourth edition cancels and replaces the third edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of new definitions to Method Call Service to allow optional Method arguments;
b)addition of reference to SystemStatusChangeEventType for event monitored item error scenarios;
c) enhancement of the general description of how determining if a Certificate is trusted;
d) addition of support for ECC;
e) addition of revisedAggregateConfiguration to AggregateFilterResult structure;
f) addition of INVALID to the BrowseDirection enumeration data type;
g) addition of INVALID to the TimestampsToReturn enumeration data type;
h) addition of definitions that make sure the subscription functionality works if retransmission queues are optional;
i) addition of client checks has been added to be symmetric to the Server Certificate check has been added;
j) clarification that ‘local’ top level domain is not appended by server into certificate and not checked by client when returned from LDS-ME;
k) addition of a definition for expiration behaviour of IssuedIdentityTokens;
l) addition of status code Good_PasswordChangeRequired to ActivateSession;
m) restriction of AdditionalInfo to servers in debug mode;
n) addition of new status code Bad_ServerTooBusy;
o) addition of definition for cases where server certificate must be contained in GetEndpoints response.

  • Standard
    245 pages
    English language
    sale 15% off
  • Standard
    257 pages
    French language
    sale 15% off
  • Standard
    502 pages
    English and French language
    sale 15% off
IEC
IEC TS 62876-3-4:2025(Main)
Nanomanufacturing - Reliability assessment - Part 3-4: Linearity of output characteristics for metal contacted 2D semiconductor devices

IEC TS 62876-3-4:2025, which is a Technical Specification, establishes a standardized guideline to assess
• reliability of metallic interfaces
of Ohmic-contacted field-effect transistors (FETs) using 2D nano-materials by quantifying
• linearity of current-voltage (I-V) output curves
for devices with various materials combinations of van der Waals (vdW) interfaces.
For metallic interfaces with 2D materials (eg. graphene, MoS2, MoTe2, WS2, WSe2, etc) and metals (eg. Ti, Cr, Au, Pd, In, Sb, etc), the reliability of Ohmic contact is quantified.
For FETs consisting of 2D materials-based channels (eg. MoS2, MoTe2, WS2, WSe2, etc), the reliability of Ohmic contact when varying contacting metal, channel length, channel thickness, applied voltage, and surface treatment condition is quantified.
The reliability of the metallic contacts is quantified from the linearity of I-V characteristics measured over extended time periods.

  • Technical specification
    24 pages
    English language
    sale 15% off
IEC
IEC 63522-4:2025(Main)
Electrical relays - Tests and measurements - Part 4: Dielectric strength test

IEC 63522-4:2025 is used for testing along with the appropriate severities and conditions for measurements and tests designed to assess the ability of DUTs to perform under expected conditions of transportation, storage and all aspects of operational use.
The object of this test is to define a standard test method for the dielectric strength test.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    French language
    sale 15% off
  • Standard
    20 pages
    English and French language
    sale 15% off
IEC
IEC TS 63414:2025(Main)
Artificial pollution tests on high-voltage polymeric insulators to be used on AC and DC systems

IEC TS 63414:2025 is applicable for the determination of the AC and DC pollution flashover and withstand voltage characteristics of insulators with polymeric housing, to be used outdoors in HV applications and exposed to polluted environments. This is also applicable for insulators with hydrophobic coatings. This document refers to AC systems with a rated voltage greater than 1 000 V and DC systems with a rated voltage greater than 1 500 V.
The object of this technical specification is to prescribe standardized test methods, requirements and procedures for artificial pollution tests applicable to polymeric insulators for overhead lines including traction lines, station post and hollow insulators of equipment. Available test experience with polymeric station post and hollow insulators, especially for DC applications, is limited.
The proposed tests are not applicable to ceramic and glass insulators without polymeric housing, to greased insulators or to special types of insulators (e.g., insulators with semiconducting glaze).
Differently to ceramic and glass insulators without polymeric housing:
- The pollution performance of insulators with polymeric housing varies with the hydrophobicity condition of the surface. The specific conditions simulated by standardized tests might not represent the actual dynamic field conditions.
- The determination of the flashover and/or withstand voltage under pollution conditions is not enough for dimensioning. Additional constraints related to possible ageing are also to be considered.
- If the Hydrophobicity Transfer Material (HTM) test according to IEC TR 62039 confirms that an insulator is non-HTM, it can be tested according to IEC 60507 or IEC TS 61245.

  • Technical specification
    39 pages
    English language
    sale 15% off