IEC 60526:1978/COR1:2010
(Corrigendum)Corrigendum 1 - High-voltage cable plug and socket connections for medical X-ray equipment
Corrigendum 1 - High-voltage cable plug and socket connections for medical X-ray equipment
Corrigendum 1 - Raccordements par fiche et réceptacle des câbles haute tension pour équipements à rayons X à usage médical
General Information
Standards Content (Sample)
IEC 60526 CEI 60526
(Second edition – 1978) (Deuxième édition – 1978)
High-voltage cable plug and socket connections Raccordements par fiche et réceptacle des
for medical X-ray equipment câbles haute tension pour équipements à rayons
X à usage médical
CORRIGENDUM 1
6 Statement of compliance 6 Déclaration de conformité
In the first three dashed items, instead of: Dans les trois premiers points, au lieu de:
– three-conductor cable connection – raccordement de câble à trois
IEC 526/1975; conducteurs CEI 526/1975;
– three-conductor cable termination – embou
...
This May Also Interest You
IEC 60831-1:2014 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage up to and including 1 000 V and frequencies of 15 Hz to 60 Hz. This part of IEC 60831 also applies to capacitors intended for use in power filter circuits. Additional definitions, requirements, and tests for power filter capacitors are given in Annex A. The object of this part of IEC 60831 is to:
- formulate uniform rules regarding performances, testing and rating;
- formulate specific safety rules;
- provide a guide for installation and operation. This third edition cancels and replaces the second edition published in 1996 and Amendment 1:2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Updating of the normative references;
- Test conditions have been clarified;
- Thermal stability test has been clarified;
- Maximum permissible voltage and current have been clarified;
- The protection of the environment has been amended with safety concerns and plastic quality requirements.
The contents of the corrigendum of May 2014 have been included in this copy.
- Standard110 pagesEnglish languagesale 15% off
- Standard73 pagesEnglish and French languagesale 15% off
IEC/IEEE 62582-1:2024 is available as IEC/IEEE 62582-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC/IEEE 62582-1:2024 contains requirements for application of the other parts of IEC/IEEE 62582 related to specific methods for condition monitoring in electrical equipment important to safety of nuclear power plants. It also includes requirements which are common to all methods. The procedures defined in IEC/IEEE 62582 are intended for detailed condition monitoring.
IEC/IEEE 62582 specifies condition monitoring methods in sufficient detail to enhance the accuracy and repeatability, and provide standard formats for reporting the results. The methods specified are applicable to electrical equipment containing polymeric materials. Some methods are especially designed for the measurement of condition of a limited range of equipment whilst others can be applied to all types of equipment for which the polymeric parts are accessible.
- Standard21 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish languagesale 15% off
IEC/IEEE 63332-387:2024 defines the criteria for the application and testing of diesel generator (DG) units used as safety class standby power supplies in nuclear facilities. In general, the standard applies to new nuclear facilities as well as for upgrading or back-fitting of existing facilities. Existing facilities can voluntarily adopt the requirements to enhance the performance capabilities and reliability of the installed DG units. The standard can be used in applications where highly reliable onsite alternating current (AC) power source is required to maintain plant safety following an event with potential loss of offsite power for an extended duration.
This document provides the principal design criteria, the design features, testing, and qualification requirements for the individual DG units that enable them to meet their functional requirements as a part of the standby power supply under the conditions produced by the design basis events catalogued in the plant safety analysis.
- Standard139 pagesEnglish and French languagesale 15% off
IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests.
This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies.
In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.
- Technical report30 pagesEnglish languagesale 15% off
IEC 62899-301-3:2024 defines measurement terms and methods related to the shape errors of printing plate rollers. Measurement terms include radius, total run-out, and three kinds of shape errors of printing plate rollers that are axial deviation, radial deviation, and cross-sectional deviation. The remaining shape error excluding the three errors mentioned above is defined as a residual shape error.
This document applies to printing plate rollers with or without patterns while excluding the pattern area for the measurement.
- Standard24 pagesEnglish languagesale 15% off
IEC TR 63484:2024 information about fungal growth on the outer sheath of optical fibre cables and on the inner components of the cable. It also provides guidance for specifying fungus resistance performance of optical cable outer sheath and internal cable components, including recommendations for fungus resistance test method as well as evaluation after test.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to hybrid telecommunication cables having a combination of both optical fibres and electrical conductors.
Since conditions suitable for fungal growth include high relative humidity and a warm atmosphere, the document is applicable to optical cables intended for transportation, storage and use under such environment over certain period, for instance, some days at least.
- Technical report15 pagesEnglish languagesale 15% off
IEC TS 63331:2024 applies to electric dishwashers for household and similar use that are supplied with hot and/or cold water.
This document deals with measurement procedures regarding the reduction of microbial contamination resulting from the use of electric dishwashers for household and similar use.
This document specifies methods that enable reproducible measurements. These derived measurement results can only be used for a relative statement. Absolute statements, i.e. health-related claims or conclusions about prevention or treatment of a disease or health improvement, are reserved for explicit regulatory action after a medical assessment.
This document does not apply to appliances intended to be used in medical, veterinary, or pharmaceutical applications.
This document does not address sanitization, disinfection or sterilization measures.
The dishwashing process is a complex operation consisting of cleaning dish items and cleaning the dishwasher itself. This document only focusses on the dish items to be cleaned.
- Technical specification32 pagesEnglish languagesale 15% off
IEC 63145-22-20:2024 specifies the standard measuring conditions and measurement methods for determining the image quality of augmented reality (AR) type eyewear displays. This document applies to see-through type (AR glasses) eyewear displays using virtual image optics.
See-through type displays (VR glasses), contact lens-type displays, and retina direct projection displays are out of the scope of this document.
- Standard1 pageEnglish languagesale 15% off
IEC TS 62271-319:2024 is applicable to alternating current circuit-breakers with intentional non-simultaneous pole operation designed for indoor or outdoor installations and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 000 V. This document provides additional ratings and type tests to be conducted for this type of circuit-breaker and is intended to be used in conjunction with IEC 62271‑100:2021. Intentional non-simultaneous pole operation can be implemented by mechanical or electrical means and both methods are within the scope of this document.
- Technical specification75 pagesEnglish languagesale 15% off
IEC 60308:2024 deals with the definition and the characteristics of control systems. It is not limited to the actual controller tasks but also includes other tasks which may be assigned to a control system, such as sequence control tasks, safety and provision for the actuating energy. The following systems are included, speed, power, opening, water level and flow control for all turbine types; electronic, electrical and fluid power devices; safety devices as well as start-up and shutdown devices. The significant technical changes introduced by the third edition are the adoption of parts of IEC 61362:2024 which deal with test matters and the introduction of new technical aspects.
- Standard160 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.