IEC 60300-1:2003
(Main)Dependability management - Part 1: Dependability management systems
Dependability management - Part 1: Dependability management systems
IEC 60300-1:2003 describes the concepts and principles of dependability management systems. It identifies the generic processes in dependability for planning, resource allocation, control, and tailoring necessary to meet dependability objectives. This standard deals with the dependability performance issues in the product life-cycle phases concerning planning, design, measurements, analysis and improvement. Dependability includes availability performance and its influencing factors: reliability performance, maintainability performance, and maintenance support performance. This second edition cancels and replaces the first edition, published in 1993, and constitutes a technical revision. The main changes with respect to the previous edition are:
- dependability management system seen as part of the organization's overall management system;
- structural and terminological alignment with ISO 9000:2000 standards;
- focus on systems. This bilingual version (2013-02) corresponds to the monolingual English version, published in 2003-06. Key words: dependability management systems
Gestion de la sûreté de fonctionnement - Partie 1: Gestion du programme de sûreté de fonctionnement
La CEI 60300-1:2003 décrit les concepts et principes des systèmes de gestion de la sûreté de fonctionnement. Elle identifie les processus génériques de la sûreté de fonctionnement dédiés à la planification, l'affectation de ressources, la maîtrise et l'adaptation, qui sont nécessaires pour atteindre les objectifs correspondants. La présente norme traite des questions liées aux performances de sûreté de fonctionnement dans les phases du cycle de vie du produit concernant la planification, la conception, les mesurages, l'analyse et l'amélioration. La sûreté de fonctionnement inclut la disponibilité et ses facteurs d'influence, à savoir la fiabilité, la maintenabilité et la logistique de maintenance. Cette deuxième édition annule et remplace la première édition publiée en 1993, dont elle constitue une révision technique. Les principales modifications par rapport à l'édition précédente sont énumérées ci-dessous:
- système de gestion de la sûreté de fonctionnement considéré comme une partie intégrante du système de management global d'un organisme;
- alignement structurel et terminologique avec les normes ISO 9000:2000;
- mise au point des systèmes. La présente version bilingue (2013-02) correspond à la version anglaise monolingue publiée en 2003-06. Mots clés : systèmes de gestion de la sûreté de fonctionnement
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD
60300-1
Second edition
2003-06
Dependability management –
Part 1:
Dependability management systems
Gestion de la sûreté de fonctionnement –
Partie 1:
Gestion du programme de sûreté de fonctionnement
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD
60300-1
Second edition
2003-06
Dependability management –
Part 1:
Dependability management systems
Gestion de la sûreté de fonctionnement –
Partie 1:
Gestion du programme de sûreté de fonctionnement
IEC 2003 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
Q
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – 60300-1 IEC:2003(E)
CONTENTS
FOREWORD . 3
INTRODUCTION .5
1 Scope and object . 6
2 Normative references. 6
3 Terms and definitions . 6
4 Dependability management system. 8
4.1 Application. 8
4.2 General recommendations . 8
4.3 Documentation recommendations . 9
5 Management responsibility. 9
5.1 Management function and commitment on dependability. 9
5.2 Customer focus on dependability . 9
5.3 Dependability policy. 9
5.4 Dependability planning .10
5.5 Responsibility, authority and communication.10
5.6 Management review.10
6 Resource management .10
6.1 Provision of resources .10
6.2 Human resources .11
6.3 Infrastructure .11
6.4 Work environment.11
7 Product realization.11
7.1 Planning of product realization.11
7.2 Customer-related processes .12
7.3 Design and development .12
7.4 Purchasing and subcontracting .12
7.5 Production and service provision .12
7.6 Control of monitoring and measuring devices.13
8 Measurement, analysis and improvement .13
8.1 General .13
8.2 Monitoring and measurement.13
8.3 Control of nonconforming product .13
8.4 Analysis of data .13
8.5 Improvement.14
Annex A (informative) Dependability relationships.15
Annex B (informative) Process steps for managing dependability .16
Bibliography.17
Figure A.1 – Dependability relationships .15
Figure B.1 – Sequence of activities .16
60300-1 IEC:2003(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEPENDABILITY MANAGEMENT –
Part 1: Dependability management systems
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60300-1 has been prepared by IEC technical committee 56:
Dependability.
This second edition cancels and replaces the first edition, published in 1993, and constitutes
a technical revision.
The main changes with respect to the previous edition are listed below.
– Dependability management system seen as part of the organization’s overall management
system.
– Structural and terminological alignment with ISO 9000:2000 standards.
– Focus on systems.
The text of this standard is based on the following documents:
FDIS Report on voting
56/856/FDIS 56/861/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 60300-1 IEC:2003(E)
The committee has decided that the contents of this publication will remain unchanged until 2010.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60300-1 IEC:2003(E) – 5 –
INTRODUCTION
Dependability is a key decision factor in today’s global business environment. Dependability
affects product costs and processes. It is an inherent product design property influencing
product performance. A dependable product is achieved through the implementation of
dependability disciplines in the early concept and design phases of the product life cycle to
provide cost-effective product operations. Like other technical and engineering disciplines,
dependability needs to be managed in order to deliver high-value products to customers. In the
broadest sense, dependability reflects user confidence in fitness for use by attaining satisfaction
in product performance capability, delivering service availability upon demand, and minimizing
the costs associated with the acquisition and ownership throughout the life cycle.
Dependability is the collective term describing the availability performance of any simple to
complex product. The factors influencing the availability performance of a product are the
reliability and maintainability design characteristics and the maintenance support perform-
ance. Annex A provides the dependability relationships. In many products, reliability,
maintainability, and availability rank amongst the dominant performance characteristics of
importance to the customers seeking cost-effective operation. Reliability and maintainability
are performance characteristics inherent in the product design. Maintenance support is
external to the product, and will affect its dependability. Maintenance support performance
reflects the ability of the maintenance organization to provide the necessary resources to
sustain a level of maintenance support effort to achieve system availability performance
objectives.
This part of IEC 60300 provides general guidelines in establishing a dependability manage-
ment system to meet most organization or project needs. The structure of the referenced
dependability standards follows a “tool-box” concept. The recommendations are non-
prescriptive to facilitate tailoring and effective implementation of dependability disciplines in
management. The top-level dependability management standard IEC 60300-1 is supported by
IEC 60300-2 providing references to application guidelines and methods. This “tool-box”
concept helps standards users locate specific dependability application guidelines and
relevant methods to accomplish their respective project objectives.
This standard encourages innovation and flexibility in management and design for product
optimization with known constraints and technology limitations. It is aligned with
ISO 9001:2000 and ISO 9004:2000 Quality Management Systems (QMS) structure to facilitate
incorporation of dependability activities in the overall management system. Dependability
activities complement QMS processes to achieve the desired levels of reliability,
maintainability, and maintenance support performance of products. The alignment of
IEC 60300-1 to ISO 9001:2000 and ISO 9004:2000 is necessary to link specific dependability
recommendations to relevant QMS processes. The major clauses in IEC 60300-1 are cross-
referencing ISO 9001:2000 and ISO 9004:2000 although some clause headings may not be
exactly the same. They address similar quality topics from a dependability perspective.
– 6 – 60300-1 IEC:2003(E)
DEPENDABILITY MANAGEMENT –
Part 1: Dependability management systems
1 Scope and object
This part of IEC 60300 describes the concepts and principles of d
...
IEC 60300-1 ®
Edition 2.0 2003-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dependability management –
Part 1: Dependability management systems
Gestion de la sûreté de fonctionnement –
Partie 1: Gestion du programme de sûreté de fonctionnement
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 60300-1 ®
Edition 2.0 2003-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dependability management –
Part 1: Dependability management systems
Gestion de la sûreté de fonctionnement –
Partie 1: Gestion du programme de sûreté de fonctionnement
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 03.100.40; 03.120.01; 21.020 ISBN 978-2-83220-665-2
– 2 – 60300-1 IEC:2003
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Dependability management system . 8
4.1 Application . 8
4.2 General recommendations . 8
4.3 Documentation recommendations . 9
5 Management responsibility . 9
5.1 Management function and commitment on dependability . 9
5.2 Customer focus on dependability . 9
5.3 Dependability policy . 9
5.4 Dependability planning . 10
5.5 Responsibility, authority and communication . 10
5.6 Management review . 10
6 Resource management . 10
6.1 Provision of resources . 10
6.2 Human resources . 11
6.3 Infrastructure . 11
6.4 Work environment . 11
7 Product realization . 11
7.1 Planning of product realization . 11
7.2 Customer-related processes . 12
7.3 Design and development . 12
7.4 Purchasing and subcontracting . 12
7.5 Production and service provision . 12
7.6 Control of monitoring and measuring devices . 13
8 Measurement, analysis and improvement . 13
8.1 General . 13
8.2 Monitoring and measurement . 13
8.3 Control of nonconforming product . 13
8.4 Analysis of data . 13
8.5 Improvement . 14
Annex A (informative) Dependability relationships . 15
Annex B (informative) Process steps for managing dependability . 16
Bibliography . 17
Figure A.1 – Dependability relationships . 15
Figure B.1 – Sequence of activities . 16
60300-1 IEC:2003 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEPENDABILITY MANAGEMENT –
Part 1: Dependability management systems
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60300-1 has been prepared by IEC technical committee 56:
Dependability.
This second edition cancels and replaces the first edition, published in 1993, and constitutes
a technical revision.
The main changes with respect to the previous edition are listed below.
– Dependability management system seen as part of the organization’s overall management
system.
– Structural and terminological alignment with ISO 9000:2000 standards.
– Focus on systems.
This bilingual version (2013-02) corresponds to the monolingual English version, published in
2003-06.
The text of this standard is based on the following documents:
FDIS Report on voting
56/856/FDIS 56/861/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.
– 4 – 60300-1 IEC:2003
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
2010. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60300-1 IEC:2003 – 5 –
INTRODUCTION
Dependability is a key decision factor in today’s global business environment. Dependability
affects product costs and processes. It is an inherent product design property influencing
product performance. A dependable product is achieved through the implementation of
dependability disciplines in the early concept and design phases of the product life cycle to
provide cost-effective product operations. Like other technical and engineering disciplines,
dependability needs to be managed in order to deliver high-value products to customers. In
the broadest sense, dependability reflects user confidence in fitness for use by attaining
satisfaction in product performance capability, delivering service availability upon demand,
and minimizing the costs assoc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.