ISO 614:2012

Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing

This International Standard specifies a method for the non-destructive breaking reliability testing of toughened safety glass panes for windows and side scuttles complying with ISO 21005.

Navires et technologie — Verres de sécurité trempés pour hublots et fenêtres rectangulaires de navires — Méthode du poinçon pour les essais non destructifs de résistance

General Information

• Status: Published
• Publication Date: 12-Jun-2012
• ICS: 47.020.10 - Hulls and their structure elements
• ICS: 81.040.30 - Glass products
• Technical Committee: ISO/TC 8/SC 8 - Ship design
• Drafting Committee: ISO/TC 8/SC 8 - Ship design
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 21-Jul-2023

Relations

• Revises: ISO 614:1989 - Shipbuilding and marine structures — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
• Effective Date: 30-May-2009

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 614
Fourth edition
2012-06-15
Ships and marine technology —
Toughened safety glass panes for
rectangular windows and side scuttles —
Punch method of non-destructive
strength testing
Navires et technologie — Verres de sécurité trempés pour hublots et
fenêtres rectangulaires de navires — Méthode du poinçon pour les
essais non destructifs de résistance
Reference number
ISO 614:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 614:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 614:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Test apparatus . 1
4 Procedure . 3
4.1 Positioning of components . 3
4.2 Proof load . 3
4.3 Test result . 4
5 Marking . 4
© ISO 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 614:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 614 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee
SC 8, Ship design.
This fourth edition cancels and replaces the third edition (ISO 614:1989), which has been technically revised.
iv © ISO 2012
...