iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 14976:1998

(Main)

Surface chemical analysis — Data transfer format

Surface chemical analysis — Data transfer format

Analyse chimique des surfaces — Protocole pour le transfert des données

Površinska kemijska analiza - Oblika prenosa podatkov

General Information

Status
Published
Publication Date
08-Jul-1998
ICS
35.240.70 - IT applications in science
71.040.40 - Chemical analysis
Technical Committee
ISO/TC 201/SC 3 - Data management and treatment
Drafting Committee
ISO/TC 201/SC 3 - Data management and treatment
Current Stage
9093 - International Standard confirmed
Completion Date
05-May-2022
Ref Project
SIST ISO 14976:1998 - Surface chemical analysis -- Data transfer format

Buy Standard

ISO 14976:1998 - Surface chemical analysis -- Data transfer formatISO 14976:1998 - Surface chemical analysis -- Data transfer format
PreviousNext
Standard
ISO 14976:1998 - Surface chemical analysis -- Data transfer format
English language
41 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 14976:1998 - osnova ISO: popravljena verzija iz leta 1999ISO 14976:1998 - osnova ISO: popravljena verzija iz leta 1999
PreviousNext
Standard
ISO 14976:1998 - osnova ISO: popravljena verzija iz leta 1999
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14976
First edition
1998-07-15
Corrected and reprinted
1999-03-15
Surface chemical analysis — Data transfer
format
Analyse chimique des surfaces — Protocole pour le transfert des données
A
Reference number
ISO 14976:1998(E)

---------------------- Page: 1 ----------------------
ISO 14976:1998(E)
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
©
ISO ISO 14976:1998(E)
iii

---------------------- Page: 3 ----------------------
©
ISO 14976:1998(E) ISO
iv

---------------------- Page: 4 ----------------------
©
INTERNATIONAL STANDARD  ISO ISO 14976:1998(E)
1

---------------------- Page: 5 ----------------------
©
ISO
ISO 14976:1998(E)
2

---------------------- Page: 6 ----------------------
©
ISO
ISO 14976:1998(E)
3

---------------------- Page: 7 ----------------------
©
ISO
ISO 14976:1998(E)
4

---------------------- Page: 8 ----------------------
©
ISO
ISO 14976:1998(E)
5

---------------------- Page: 9 ----------------------
©
ISO
ISO 14976:1998(E)
6

---------------------- Page: 10 ----------------------
©
ISO
ISO 14976:1998(E)
7

---------------------- Page: 11 ----------------------
©
ISO
ISO 14976:1998(E)
8

---------------------- Page: 12 ----------------------
©
ISO
ISO 14976:1998(E)
9

---------------------- Page: 13 ----------------------
©
ISO
ISO 14976:1998(E)
10

---------------------- Page: 14 ----------------------
©
ISO
ISO 14976:1998(E)
11

---------------------- Page: 15 ----------------------
©
ISO
ISO 14976:1998(E)
12

---------------------- Page: 16 ----------------------
©
ISO
ISO 14976:1998(E)
13

---------------------- Page: 17 ----------------------
©
ISO
ISO 14976:1998(E)
14

---------------------- Page: 18 ----------------------
©
ISO
ISO 14976:1998(E)
15

---------------------- Page: 19 ----------------------
©
ISO
ISO 14976:1998(E)
16

---------------------- Page: 20 ----------------------
©
ISO
ISO 14976:1
...

SLOVENSKI STANDARD
SIST ISO 14976:1998
01-december-1998
Površinska kemijska analiza - Oblika prenosa podatkov
Surface chemical analysis -- Data transfer format
Analyse chimique des surfaces -- Protocole pour le transfert des données
Ta slovenski standard je istoveten z: ISO 14976:1998
ICS:
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
71.040.40 Kemijska analiza Chemical analysis
SIST ISO 14976:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 14976:1998

---------------------- Page: 2 ----------------------

SIST ISO 14976:1998
INTERNATIONAL ISO
STANDARD 14976
First edition
1998-07-15
Corrected and reprinted
1999-03-15
Surface chemical analysis — Data transfer
format
Analyse chimique des surfaces — Protocole pour le transfert des données
A
Reference number
ISO 14976:1998(E)

---------------------- Page: 3 ----------------------

SIST ISO 14976:1998
ISO 14976:1998(E)
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 14976:1998
©
ISO ISO 14976:1998(E)
iii

---------------------- Page: 5 ----------------------

SIST ISO 14976:1998
©
ISO 14976:1998(E) ISO
iv

---------------------- Page: 6 ----------------------

SIST ISO 14976:1998
©
INTERNATIONAL STANDARD  ISO ISO 14976:1998(E)
1

---------------------- Page: 7 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
2

---------------------- Page: 8 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
3

---------------------- Page: 9 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
4

---------------------- Page: 10 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
5

---------------------- Page: 11 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
6

---------------------- Page: 12 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
7

---------------------- Page: 13 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
8

---------------------- Page: 14 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
9

---------------------- Page: 15 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
10

---------------------- Page: 16 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
11

---------------------- Page: 17 ----------------------

SIST ISO 14976:1998
©
ISO
ISO 14976:1998(E)
12

---------------------- Page: 18 ----------------------

SIST ISO 14976:1998
©
ISO
I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 14975:2000(Main)
Surface chemical analysis — Information formats

This International Standard specifies a format to supplement ISO 14976 to transfer data for the creation, expansion and revision of a surface chemical analysis spectral database. The format is applied to Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) spectral data.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 16413:2020(Main)
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

This document specifies a method for the evaluation of thickness, density and interface width of single layer and multi-layered thin films which have thicknesses between approximately 1 nm and 1 μm, on flat substrates, by means of X-Ray Reflectometry (XRR). This method uses a monochromatic, collimated beam, scanning either an angle or a scattering vector. Similar considerations apply to the case of a convergent beam with parallel data collection using a distributed detector or to scanning wavelength, but these methods are not described here. While mention is made of diffuse XRR, and the requirements for experiments are similar, this is not covered in the present document. Measurements may be made on equipment of various configurations, from laboratory instruments to reflectometers at synchrotron radiation beamlines or automated systems used in industry. Attention should be paid to an eventual instability of the layers over the duration of the data collection, which would cause a reduction in the accuracy of the measurement results. Since XRR, performed at a single wavelength, does not provide chemical information about the layers, attention should be paid to possible contamination or reactions at the specimen surface. The accuracy of results for the outmost layer is strongly influenced by any changes at the surface. NOTE 1 Proprietary techniques are not described in this document.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    32 pages
    English language
    sale 15% off
ISO
ISO 14975:2000(Main)
Surface chemical analysis — Information formats

This International Standard specifies a format to supplement ISO 14976 to transfer data for the creation, expansion and revision of a surface chemical analysis spectral database. The format is applied to Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) spectral data.

  • Standard
    17 pages
    English language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO/IEC 9797-1:2011/Amd 1:2023(Amendment)
Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 23316-7:2023(Main)
Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

This document instructs the manufacturers of tractors and implements how to integrate mechanically and use the HPI. NOTE The terms "tractor" and "implement” are used instead of “supply system” and “consumer system” for better understanding in this part.

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 22574:2023(Main)
Road vehicles — Brake linings friction materials — Visual inspection

This document defines visual aspects for the identification and assessment of product characteristics for friction materials in terms of quality and for commercial and technical agreements. The sequence of the product characteristics represents no order of priority. Inspection is carried out in unused, “as supplied” condition. In some characteristic features, there are differences between brake linings with an effective lining pad area less than 120 cm2 and larger than 120 cm2. The acceptance criteria ensure exclusion of any characteristics that could impact the function and performance of brake linings and applies unless other agreements between the customer and the supplier.

  • Standard
    35 pages
    English language
    sale 15% off