ISO/IEC 15404:2000

Information technology — Office machines — Minimum information to be included in specification sheets — Facsimile equipment

Technologies de l'information — Machines de bureau — Information minimale à inclure dans les feuilles de spécifications — Équipement de télécopie

General Information

• Status: Published
• Publication Date: 19-Jul-2000
• ICS: 33.050.30 - Equipment for telex, teletext, telefax
• Technical Committee: ISO/IEC JTC 1/SC 28 - Office equipment
• Drafting Committee: ISO/IEC JTC 1/SC 28 - Office equipment
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 08-Dec-2023

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 15404
First edition
2000-07-15
Information technology — Office
machines — Minimum information to be
included in specification sheets —
Facsimile equipment
Technologies de l'information — Machines de bureau — Information
minimale à inclure dans les feuilles de spécifications — Équipement de
télécopie
Reference number
ISO/IEC 15404:2000(E)
©
ISO/IEC 2000

---------------------- Page: 1 ----------------------
ISO/IEC 15404:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO/IEC 2000 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 15404:2000(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 15404 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 28, Office equipment.
Annex A of this International Standard is for information only.
© ISO/IEC 2000 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO/IEC 15404:2000(E)
Information technology — Office machines — Minimum
information to be included in specification sheets — Facsimile
equipment
1 Scope
This International Standard is intended to facilitate the users in selecting facsimile equipment which meets their
requirements.
This International Standard specifies the minimum information that shall be included in the specification sheets of
facsimile equipment so that users may compare the characteristics of different machines.
This International Standard applies to facsimile equipment that could be operated in an office environment.
Facsimile equipment requiring specially equipped rooms or specially instructed operators are not considered in this
International Standard. Facsimile equipment is assigned to group 3 and 4 depending on technical capabilities and
is classified according to paper handling, scanning, recording and resolution.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated refe
...