ISO 17338:2009
(Main)Ships and marine technology — Drawings for fire protection — Indications of fire rating by divisions for ships and high-speed craft
Ships and marine technology — Drawings for fire protection — Indications of fire rating by divisions for ships and high-speed craft
ISO 17338:2009 specifies the design and layout of drawings for indicating the fire rating of thermal and structural boundaries (divisions) for fire protection of ships.
Navires et technologie maritime — Dessins pour la protection contre l'incendie — Indication des cotes au feu des cloisonnements
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 17338
First edition
2009-08-15
Ships and marine technology —
Drawings for fire protection — Indications
of fire rating by divisions for ships and
high-speed craft
Navires et technologie maritime — Dessins pour la protection contre
l'incendie — Indication des cotes au feu des cloisonnements
Reference number
ISO 17338:2009(E)
©
ISO 2009
---------------------- Page: 1 ----------------------
ISO 17338:2009(E)
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
IMPORTANT — The electronic file of this document contains colours which are considered to be
useful for the correct understanding of the document. Users should therefore consider printing this
document using a colour printer.
This CD-ROM contains the publication ISO 17338:2009 in portable document format (PDF), which can be
viewed using Adobe® Acrobat® Reader.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless required for installation or otherwise specified, no part of this CD-ROM may be reproduced, stored in a retrieval
system or transmitted in any form or by any means without prior permission from ISO. Requests for permis
...
INTERNATIONAL ISO
STANDARD 17338
First edition
2009-08-15
Ships and marine technology —
Drawings for fire protection — Indications
of fire rating by divisions for ships and
high-speed craft
Navires et technologie maritime — Dessins pour la protection contre
l'incendie — Indication des cotes au feu des cloisonnements
Reference number
ISO 17338:2009(E)
©
ISO 2009
---------------------- Page: 1 ----------------------
ISO 17338:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 17338:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17338 was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee
SC 1, Lifesaving and fire protection.
© ISO 2009 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 17338:2009(E)
Introduction
This International Standard provides standard illustrations and methods of preparation for drawings for fire
protection of ships and high-speed craft provided by thermal and structural boundaries (divisions). It may be
applied equally to drawings for existing ships and high-speed craft, and for ships and high-speed craft under
[3]
construction. This International Standard is complementary to ISO 17631 , which specifies plans primarily
for use by ship operators, and shipboard and shore-side fire-fighting personnel, in responding to shipboard
emergencies. This International Standard specifies drawings primarily for use by shipbuilders and regulatory
authorities to specify and audit the system of thermal and structural boundaries to provide fire protection on a
ship or high-speed craft as required by applicable national and international regulations.
iv © ISO 2009 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 17338:2009(E)
Ships and marine technology — Drawings for fire protection —
Indications of fire rating by divisions for ships and high-speed
craft
IMPORTANT — The electronic file of this document contains colours which are considered to be
useful for the correct understanding of the document. Users should therefore consider printing this
document using a colour printer.
1 Scope
This International Standard specifies the design and layout
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.