Mechanical vibration and shock — Performance parameters for condition monitoring of structures

ISO 16587:2004 describes the performance parameters for assessing the condition of structures, including types of measurement, factors for setting acceptable performance limits, data acquisition parameters for constructing uniform databases, and internationally accepted measurement guidance (e.g. terminology, transducer calibration, transducer mounting and approved transfer function techniques). The procedures relate to in-service monitoring of structures, and include all components and sub-assemblies necessary to provide the functioning of the structure as a complete entity. The monitoring is intended to be ongoing in nature through the lifecycle of the structure. The target industries for ISO 16587:2004 include: construction, infrastructure, transportation, power generation, oil and gas, and leisure and entertainment. ISO 16587:2004 is applicable to stationary structures, such as: buildings, bridges and tunnels, towers, masts and antennae, tanks and silos, retaining walls and dams, jetties and other shore-side structures, offshore platforms, pressure vessels, and pipelines. Non-stationary structures (e.g. self-propelled ships) and mobile structures (e.g. offshore jack-up platforms) are excluded from ISO 16587:2004.

Vibrations et chocs mécaniques — Paramètres de performance pour la surveillance des structures

General Information

Status
Published
Publication Date
21-Sep-2004
Current Stage
9060 - Close of review
Start Date
02-Sep-2029
Ref Project

Relations

Effective Date
06-Jun-2022

Buy Standard

Standard
ISO 16587:2004 - Mechanical vibration and shock -- Performance parameters for condition monitoring of structures
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16587
First edition
2004-10-01

Mechanical vibration and shock —
Performance parameters for condition
monitoring of structures
Vibrations et chocs mécaniques — Paramètres de performance pour la
surveillance des structures




Reference number
ISO 16587:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 16587:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16587:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16587 was prepared by Technical Committee ISO/TC 108, Mechanical vibration and shock.
© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 16587:2004(E)
Introduction
This International Standard provides general guidelines for the condition monitoring of structures, using
parameters typically used to measure or monitor structure performance, such as displacement, strain,
vibration, settlement, rotation, temperature, and foundation pore pressure.
It has been structured to be consistent with ISO 13380 and ISO 17359 in order to facilitate a consistent
approach to the condition monitoring of systems.
The information provided in this International Standard will be supplemented by ISO 18431 which will be
published in several parts.

iv © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 16587:2004(E)

Mechanical vibration and shock — Performance parameters for
condition monitoring of structures
1 Scope
This International Standard describes the performance parameters for assessing the condition of structures,
including types of measurement, factors for setting acceptable performance limits, data acquisition parameters
for constructing uniform databases, and internationally accepted measurement guidance (e.g. terminology,
transducer calibration, transducer mounting and approved transfer function techniques).
The procedures relate to in-service monitoring of structures, and include all components and sub-assemblies
necessary to provide the functioning of the structure as a complete entity. The monitoring is intended to be
ongoing in nature through the lifecycle of the structure.
NOTE 1 Figure 1 is a flowchart showing how this International Standard takes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.