ISO 6080:2024
(Main)Tobacco heating systems — Vocabulary
Tobacco heating systems — Vocabulary
This document: — defines standardized terminology and definitions for the heated tobacco product (HTP) category; — defines the heated tobacco product (HTP) sub-categories and the attributes of each; — does not include waterpipe or loose-leaf tobacco products. This document does not specify the means for aerosol trapping, subsequent sample preparation or analyses of components in the trapped aerosol. The HTP category clearly excludes products such as conventional combustible cigarettes, cigars, roll-your own tobacco products, pipe tobacco products, e‑vapor products (also called electronic cigarettes or e‑cigarettes), moist smokeless tobacco, oral tobacco products, and oral tobacco derived nicotine (OTDN) products. This document describes the terms and definitions that apply to tobacco heating systems. Any product that falls under those terms and definitions can be tested applying testing standards that are specifically addressing tobacco heating systems. This document aids in choosing the right standard for tobacco heating systems testing.
Systèmes de chauffage du tabac — Vocabulaire
Le présent document: — fournit la terminologie standardisée et les définitions relatives à la catégorie des produits de tabac chauffés (PTC); — définit les sous-catégories des produits de tabac chauffés (PTC) et les attributs de chacun des produits; — n’inclut pas les pipes à eau ou les produits à base de feuilles de tabac en vrac. Le présent document ne spécifie pas les moyens de piégeage de l’aérosol, la préparation ultérieure de l’échantillon, ni les analyses des substances de l’aérosol piégé. La catégorie de PTC exclut clairement les produits tels que cigarettes combustibles classiques, cigares, produits de tabac à rouler, produits de tabac pour pipes, produits de vapotage (également appelés cigarettes électroniques ou e-cigarettes), tabac sans fumée humide, produits de tabac à usage oral et produits à usage oral à base de nicotine dérivée du tabac (PNDT). Le présent document décrit les termes et les définitions qui s’appliquent aux systèmes de chauffage du tabac. Tout produit relevant de ces termes et définitions peut être soumis à essai en appliquant des normes d’essai spécialement conçues pour les systèmes de chauffage du tabac. Le présent document aide à choisir la norme adaptée aux essais des systèmes de chauffage du tabac.
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 6080
First edition
Tobacco heating systems —
2024-05
Vocabulary
Systèmes de chauffage du tabac — Vocabulaire
Reference number
ISO 6080:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 6080:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 6080:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms .1
3.2 Terms related to heated tobacco products .3
Bibliography . 5
Index . 6
© ISO 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO 6080:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the c
...
Norme
internationale
ISO 6080
Première édition
Systèmes de chauffage du tabac —
2024-05
Vocabulaire
Tobacco heating systems — Vocabulary
Numéro de référence
ISO 6080:2024(fr) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 6080:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
© ISO 2024 – Tous droits réservés
ii
---------------------- Page: 2 ----------------------
ISO 6080:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
3.1 Termes généraux .1
3.2 Termes relatifs aux produits de tabac chauffés .3
Bibliographie . 5
Index . 6
© ISO 2024 – Tous droits réservés
iii
---------------------- Page: 3 ----------------------
ISO 6080:2024(fr)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux
de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de propriété revendiqué à cet égard. À la date de publication du présent document, l’ISO n’avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible
...
FINAL DRAFT
International
Standard
ISO/FDIS 6080
ISO/TC 126
Tobacco heating systems —
Secretariat: DIN
Vocabulary
Voting begins on:
Systèmes de chauffage du tabac — Vocabulaire 2024-03-06
Voting terminates on:
2024-05-01
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 6080:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 6080:2024(en)
International
Standard
ISO/FDIS 6080
ISO/TC 126
Tobacco heating systems —
Secretariat: DIN
Vocabulary
Voting begins on:
Systèmes de chauffage du tabac — Vocabulaire
Voting terminates on:
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 6080:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 6080:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms .1
3.2 Terms related to heated tobacco products .3
Bibliography . 5
Index . 6
© ISO 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO/FDIS 6080:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International o
...
2024-01-30
Style Definition
...
Formatted: Right: 42.55 pt, Bottom: 28.35 pt, Gutter:
ISO/DIS FDIS 6080:2023(E)
0 pt, Section start: New page, Header distance from
edge: 36 pt, Footer distance from edge: 36 pt
ISO /TC 126/WG 22
Formatted: zzCover large
Secretariat: DIN
Formatted: English (United Kingdom)
Formatted: Space After: 0 pt, Adjust space between
Date: 2024-02-21
Latin and Asian text, Adjust space between Asian text
and numbers
Formatted: English (United Kingdom)
Formatted: Font: 16 pt, English (United Kingdom)
Tobacco heating systems — Terms and definitionsVocabulary
Formatted: Cover Title_A1, Adjust space between Latin
Systèmes de chauffage du tabac — Vocabulaire
and Asian text, Adjust space between Asian text and
numbers
Formatted: English (United Kingdom)
FDIS stage
---------------------- Page: 1 ----------------------
ISO/DIS FDIS 6080:2023(E2024(en)
Formatted: Font: 11 pt, Bold
Formatted: HeaderCentered, Space After: 0 pt, Line
spacing: single, Tab stops: Not at 214.3 pt
© ISO 20232024 Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, Formatted: Indent: Left: 0 pt, Right: 0 pt, Space
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO Before: 0 pt, No page break before, Adjust space
at the address below or ISO’s member body in the country of the requester. between Latin and Asian text, Adjust space between
Asian text and numbers
ISO copyright office
Formatted: Default Paragraph Font
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
Formatted: French (Switzerland)
Formatted: English (United Kingdom)
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Space After: 0
pt, Line spacing: single
ii © ISO 2023 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/DIS FDIS 6080:2023(E2024(en)
Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
Contents
Formatted: HeaderCentered, Left, Space After: 0 pt,
Line spacing: single
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms . 1
3.2 Terms related to heated tobacco products . 3
Bibliography . 6
Index . 7
Foreword iv
Introduction v
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
Bibliography 4
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Space After: 0
pt, Line spacing: single
© ISO 2023 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO/DIS FDIS 6080:2023(E2024(en)
Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
Formatted: HeaderCentered, Space After: 0 pt, Line
Foreword
spacing: single, Tab stops: Not at 214.3 pt
Formatted: Font: 11 pt, Bold
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member bod
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.