iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 29461-3

(Main)

Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements

Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements

Systèmes de filtration d'air d'admission pour machines tournantes — Méthodes d'essai — Partie 3: Intégrité mécanique des éléments filtrants

General Information

Status
Not Published
ICS
29.160.99 - Other standards related to rotating machinery
Technical Committee
ISO/TC 142 - Cleaning equipment for air and other gases
Drafting Committee
ISO/TC 142/WG 9 - Particulate air filter intake systems for rotary machinery and stationary internal combustion engines
Current Stage
6000 - International Standard under publication
Completion Date
26-Mar-2024
Ref Project

Relations

Consolidates
ISO 22834:2022 - Large yachts — Quality assessment of life onboard — Stabilization and sea keeping
Effective Date
06-Jun-2022

Buy Standard

ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024
PreviousNext
Draft
ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024
English language
20 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024REDLINE ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024
PreviousNext
Draft
REDLINE ISO/FDIS 29461-3 - Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements Released:15. 01. 2024
English language
20 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 29461-3
ISO/TC 142
Air intake filter systems for rotary
Secretariat: UNI
machinery — Test methods —
Voting begins on:
2024-01-29
Part 3:
Mechanical integrity of filter
Voting terminates on:
2024-03-25
elements
Systèmes de filtration d'air d'admission pour machines
tournantes — Méthodes d'essai —
Partie 3: Intégrité mécanique des éléments filtrants
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 29461-3:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 29461-3:2024(en)
International
Standard
ISO/FDIS 29461-3
ISO/TC 142
Air intake filter systems for rotary
Secretariat: UNI
machinery — Test methods —
Voting begins on:
Part 3:
Mechanical integrity of filter
Voting terminates on:
elements
Systèmes de filtration d'air d'admission pour machines
tournantes — Méthodes d'essai —
Partie 3: Intégrité mécanique des éléments filtrants
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 29461-3:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 29461-3:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Test parameter .2
3.2 Filter to be tested .2
3.3 Test duration .3
3.4 Test materials .3
4 Test rig, conditions and equipment .
...

ISO/FDIS 29461-3:2023(E)
ISO /TC 142
Date: 2023-10-10
Secretariat: UNI

Date: 2024-01-10
Air intake filter systems for rotary machinery — Test methods
— —
Part 3:
Mechanical integrity of filter elements
Systèmes de filtration d'air d'admission pour machines tournantes — Méthodes d'essai —
Partie 3: Intégrité mécanique des éléments filtrants
FDIS stage

---------------------- Page: 1 ----------------------
ISO/FDIS 29461-3:20232024(E)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland


ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/FDIS 29461-3:20232024(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Test parameter . 2
3.2 Filter to be tested . 2
3.3 Test duration. 3
3.4 Test materials . 3
4 Test rig, conditions and equipment . 3
4.1 Test conditions . 3
4.2 Test rig – General requirements . 3
4.3 Camera . 4
4.4 Differential pressure measurement . 5
4.5 Flow measurement . 5
4.6 Dust feeder . 5
4.7 Water spraying nozzles (fogging nozzles) . 6
4.8 Final filter/coarse filter mat or grid . 6
4.9 Temperature, relative humidity. 6
5 Qualification of test rig and apparatus . 6
5.1 Pressure system test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 29461-2:2022(Main)
Air intake filter systems for rotary machinery — Test methods — Part 2: Filter element endurance test in fog and mist environments

This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
ISO
ISO 29461-1:2021(Main)
Air intake filter systems for rotary machinery — Test methods — Part 1: Static filter elements

This document specifies methods and procedures for determining the static performance of particulate air filters used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. It applies to air filters with an efficiency of 85 % or more for the MPPS (EPA and HEPA filters) which are tested according to ISO 29463 (all parts) and filters with a lower efficiency which are tested according to ISO 16890 (all parts). The procedures described in both ISO 16890 (all parts) and ISO 29463 (all parts) are applied and extended by this document to air filters which operate at flow rates within the range 0,24 m3/s (850 m3/h) up to 2,36 m3/s (8 500 m3/h). Static filter systems normally use multiple stages of coarse, fine and optional EPA or HEPA filter elements to protect the machinery. The scope of this document includes methods for performance testing of individual filter elements. It does not include methods for the direct measurement of the performance of entire systems as installed in service except in cases where they can meet the qualification criteria for the test assembly. Nevertheless, cumulative filter efficiencies of multistage systems of fine filters can be calculated by using the methods described in ISO 16890-1. This document refers to static (barrier) filter systems but can also be applied to other filter types and systems in appropriate circumstances, for example to evaluate the initial efficiency of cleanable and surface loading filters. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to efficiency and lifetime.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
ISO
ISO 29461-2:2022(Main)
Air intake filter systems for rotary machinery — Test methods — Part 2: Filter element endurance test in fog and mist environments

This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
ISO
ISO 29461-1:2021(Main)
Air intake filter systems for rotary machinery — Test methods — Part 1: Static filter elements

This document specifies methods and procedures for determining the static performance of particulate air filters used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines. It applies to air filters with an efficiency of 85 % or more for the MPPS (EPA and HEPA filters) which are tested according to ISO 29463 (all parts) and filters with a lower efficiency which are tested according to ISO 16890 (all parts). The procedures described in both ISO 16890 (all parts) and ISO 29463 (all parts) are applied and extended by this document to air filters which operate at flow rates within the range 0,24 m3/s (850 m3/h) up to 2,36 m3/s (8 500 m3/h). Static filter systems normally use multiple stages of coarse, fine and optional EPA or HEPA filter elements to protect the machinery. The scope of this document includes methods for performance testing of individual filter elements. It does not include methods for the direct measurement of the performance of entire systems as installed in service except in cases where they can meet the qualification criteria for the test assembly. Nevertheless, cumulative filter efficiencies of multistage systems of fine filters can be calculated by using the methods described in ISO 16890-1. This document refers to static (barrier) filter systems but can also be applied to other filter types and systems in appropriate circumstances, for example to evaluate the initial efficiency of cleanable and surface loading filters. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to efficiency and lifetime.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    16 pages
    French language
    sale 15% off
ISO
ISO 19859:2016(Main)
Gas turbine applications — Requirements for power generation

ISO 19859:2016 specifies the minimum technical and documentation requirements for the evaluation and procurement of gas turbine systems for electrical power generation. It applies to simple cycle and combined cycle gas turbines for both onshore and offshore applications, where applicable. It also applies to gas turbines used in cogeneration (see ISO 11086:1996, Annex B). Testing of the gas turbine in combination with a generator is included in the scope. It is not applicable to gas turbines used for all types of propulsion including aircraft, mobile barges, floating production vessels and marine propulsion applications and microturbines. ISO 19859:2016 defines the requirements for gas turbine power generation from an international perspective based on the content of existing, recognized ISO and IEC standards to the greatest extent practical. Nonetheless, it is recognized that within the industry other codes or standards are used, some of which are included in the text of this International Standard. The use of other such codes and standards is permissible provided an appropriate and acceptable level of requirements, functional design and safety is achieved and agreement has been reached for their use between the Purchaser and Contractor and such use is suitably documented. Consideration should be given to applying/using standards in the following hierarchical order: international; regional; national; local. ISO 19859:2016 identifies the requirements for both the Purchaser and Contractor attributable to the design and procurement of a gas turbine power generation package. The defined requirements apply to the scope of supply, except where excluded, encompassing the following equipment and the associated selected options, located within the power generation package, (see 3.14), listed below: - gas turbine package; - load shaft coupling and clutch, as applicable; - air inlet system; - exhaust system; - fuel equipment; - control equipment; - electrical equipment; - additional auxiliary systems, including starting, lubrication, barring, compressor wash, pipework, drains and vents; - fire and gas protection; - cooling water equipment. Where applicable to the integrity of the gas turbine package, the interface and applicable design requirements are included for equipment, utilities and supplies that interface with the power generation package. The following equipment is excluded from the scope of supply, but references are included where required for interface or performance measurement: - generator and auxiliary systems, except the module control option; - steam turbine and auxiliary systems; - equipment external to the power generation package. Data sheets in Annex A of this International Standard are provided for defining requirements and exchanging information between the Purchaser and the Contractor. The Purchaser fills in the data sheets for the tender and forwards them to the Contractor. The Contractor responds by completing the applicable data sheets for their tender. Annex A identifies the different types of data sheets and how they are to be used. Where the Contractor does not comply with a selected requirement of this International Standard, this is detailed as an exception, referencing the applicable clause and describing the deviation and any alternatives available in a document listing all the exceptions taken. Where the text in this International Standard requests procedures and operating, maintenance and commissioning manual information or equipment that would require the disclosure/supply of proprietary information/equipment which the Contractor is not prepared to release, such exceptions are listed. Where this situation exists, the Contractor will be prepared to release appropriate personnel and equipment to undertake all the tasks that otherwise would be undertaken by the Purchaser. A bullet ● at the beginning of a paragraph in the text of this International Standard indicates an optiona

  • Standard
    147 pages
    English language
    sale 15% off
  • Standard
    147 pages
    English language
    sale 15% off
  • Standard
    161 pages
    French language
    sale 15% off
ISO
ISO 23555-3:2024(Main)
Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 3: Safety shut-off devices

This document specifies safety, constructional, performance, testing and documentation requirements of gas safety shut-off devices (SSDs). This document is applicable to SSDs with operating pressures greater than 500 kPa (5 bar) up to 10 MPa (100 bar) of nominal connection sizes up to and including DN 400 for use with fuel gases such as natural gas, manufactured gas, biomethane or liquefied petroleum gas (LPG) in commercial industrial installations, including fuel gas infrastructures. This document is applicable to SSDs for an operating temperature range from −20 °C to +60 °C; This document is applicable to: — test methods which are intended for product type tests, routine tests and batch surveillance tests; — SSDs which use the pipeline gas as a source of control energy unassisted by any external power source; — SSDs integrating on the same body a second SSD, conforming to the requirements in this document; — SSDs integrating a gas pressure regulator conforming to ISO 23555-2; — SSDs incorporating a creep (venting) relief device and/or a vent limiter conforming to the requirements in this document; This document does not apply to: — SSDs upstream from/on/in domestic gas-consuming appliances which are installed downstream of domestic gas meters; — SSDs designed to be incorporated into pressure control systems used in service lines (pipework from the main pipework in a gas infrastructure to the point of delivery of the gas) with declared volumetric flow rate ≤ 200 m3/h (n); — industrial process control valves on/off type (see IEC 60534 for information on the design, classification and tests for this type of valve); NOTE Such valves cannot be declared conformant to this document. — SSDs used in sour gas environments (gas environments containing water and H2S are considered sour) or corrosive conditions; — SSDs in service conditions with waste gases (e.g. biogas etc.), if additional information is not provided (e.g. contaminant, liquid etc.).

  • Standard
    50 pages
    English language
    sale 15% off
  • Draft
    50 pages
    English language
    sale 15% off
  • Draft
    50 pages
    English language
    sale 15% off
ISO
ISO 17099:2024(Main)
Radiological protection — Performance criteria for laboratories using the cytokinesis-block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry

This document gives guidance on a) confidentiality of personal information for the customer and the laboratory, b) laboratory safety requirements, c) calibration sources and calibration dose ranges useful for establishing the reference dose-response curves that contribute to the dose estimation from CBMN assay yields and the detection limit, d) performance of blood collection, culturing, harvesting, and sample preparation for CBMN assay scoring, e) scoring criteria, f) conversion of micronucleus frequency in BNCs into an estimate of absorbed dose, g) reporting of results, h) quality assurance and quality control, and i) informative annexes containing sample instructions for customers, sample questionnaire, a microscope scoring data sheet, and a sample report. This document excludes methods for automated scoring of CBMN.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    38 pages
    French language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
ISO
ISO 13205:2024(Main)
Marine technology — Seawater desalination — Vocabulary

This document defines terms and definitions for the integral seawater desalination process. It covers basic definitions, as well as specific subject matter including water intake, pre-treatment, membrane desalination, distillation desalination, post-treatment and auxiliary terms. This document applies to all types and sizes of seawater desalination facilities and systems, and to all types of stakeholders involved in seawater desalination.

  • Standard
    11 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off
ISO
ISO 1171:2024(Main)
Coal and coke — Determination of ash

This document specifies a method for the determination of the ash of coal and coke.

  • Standard
    4 pages
    English language
    sale 15% off
  • Draft
    4 pages
    English language
    sale 15% off
  • Draft
    4 pages
    English language
    sale 15% off
ISO
ISO 24671:2024(Main)
Road vehicles — Qualification and certification of technical personnel dealing with natural gas vehicles (NGVs)

This document specifies requirements for the qualification and certification of personnel who perform operations on NGVs, according to the level of safety required by the role and/or position. NOTE 1 The certification is required for the level 3 and 4 of competence as defined in ISO 23684. NOTE 2 This document specifies requirements for what are, in effect, third-party conformity assessment schemes. These requirements do not directly apply to conformity assessment by second or first parties, but relevant parts of this document can be referred to in such arrangements.

  • Standard
    25 pages
    English language
    sale 15% off
  • Draft
    26 pages
    English language
    sale 15% off
  • Draft
    26 pages
    English language
    sale 15% off