ISO 6372-1:1989
(Main)Nickel and nickel alloys — Terms and definitions — Part 1: Materials
Nickel and nickel alloys — Terms and definitions — Part 1: Materials
Terms and definitions listed in this part of ISO 6372 have been approved by the CCC (Customs Co-operation Council) to form the basis for the revision of chapter 75 "Nickel" of the CCC-Nomenclature. The three parts have been published bilingual (E/F). This part of ISO 6372 gives general terms for and definitions of materials. Contains a classification of nickel and nickel alloys.
Nickel et alliages de nickel — Termes et définitions — Partie 1: Matériaux
Nikelj in nikljeve zlitine - Izrazi in definicije - 1. del: Materiali
General Information
Relations
Standards Content (Sample)
INTERNATIONAL
6372 ,Fl
STANDARD
First edition
Premiere edition
NORME
1989-07-01
INTERNATIONALE
Nickel and nicke1 alloys - Terms and
definitions -
Part 1 :
Materials
Nickel et alliages de nicke1 - Termes et
definitions -
Partie 1 :
Materiaux
Reference number
Numh-o de reference
ISO 6372-1 : 1989 (E/F)
---------------------- Page: 1 ----------------------
ISO 63724 : 1989 (E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 6372-1 was prepared by Technical Committee ISO/TC 155,
Nickel and nicke/ alloys.
Terms and definitions listed in this part of ISO 6372 have been approved in principle by
the Customs Co-Operation Council KCC) to form the basis of the Harmonized Com-
modity Description and Coding System (Harmonized System) for the revision of
chapter 75 “Nickel” of the CCC-Nomenclature.
ISO 6372 consists of the following Parts, under the general title Nickeland nickelaloys -
Terms and definitions :
-
Part 7 : Materials
- Part 2 : Refinery products
-
Part 3 : Wrought products and castings
0 ISO 1989
All rights reserved. No patt of this publication may be reproduced or utilized in any form or by any
means, electronie or mechanical, including photocopying and microfilm, without Permission in
writing from the publisher./Droits de reproduction reserves. Aucune Partie de cette publication
ne peut etre reproduite ni utilisee sous quelque forme que ce soit et par aucun procede, electroni-
que ou mecanique, y compris Ia photocopie et les microfilms, sans I’accord ecrit de I’editeur.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland/lmprime en Suisse
ii
---------------------- Page: 2 ----------------------
ISO 6372-1 : 1989 (E/F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une federation mondiale
d’organismes nationaux de normalisation (comites membres de I’ISO). L’elaboration
des Normes internationales est en general confiee aux comites techniques de I’ISO.
Chaque comite membre interesse par une etude a Ie droit de faire Partie du comite
technique cree a cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent egalement aux travaux. L’ISO col-
labore etroitement avec Ia Commission electrotechnique internationale (GEI) en ce qui
concerne Ia normalisation electrotechnique.
Les projets de Normes internationales adoptes par les comites techniques sont soumis
aux comites membres pour approbation, avant leur acceptation comme Normes inter-
nationales par Ie Conseil de I’ISO. Les Normes internationales sont approuvees confor-
mement aux procedures de I’ISO qui requierent I’approbation de 75 % au moins des
comites membres votants.
La Norme internationale ISO 6372-1 a etc elaboree par Ie comite technique
I SO/TC 155, Nickel et alliages de nicke!.
Les termes et definitions cites dans Ia presente Partie de I’ISO 6372 ont etc approuves
dans leur Principe par Ie Conseil de Cooperation Douaniere (CCD) pour former Ia base
de Systeme Harmonise de Designation et de Codification des marchandises (Systeme
Harmanise) pour Ia revision du chapitre 75, Nickel, de Ia Nomenclature du CCD.
L’ISO 6372 comprend les Parties suivantes, presentees sous Ie titre general Nicke/ et
alliages de nicke/ - Termes et definitions :
- Partie 7 : Materiaux
- Partie 2 : Produits de raffinage
- Partie 3 : Produits corroyb et produits moulh
---------------------- Page: 3 ----------------------
This page intentionally left blank
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD
ISO 6372-1 : 1989 (E/F)
NORME INTERNATIONALE
Nickel and nicke1 alloys -
Nickel et alliages de
Terms and definitions -
nicke1 - Termes et
definitions -
Part 1 :
Materials Partie 1 :
Materiaux
1 Domaine d’application
1 Scope
This part of ISO 6372 gives terms for
...
SLOVENSKI STANDARD
SIST ISO 6372-1:1997
01-maj-1997
Nikelj in nikljeve zlitine - Izrazi in definicije - 1. del: Materiali
Nickel and nickel alloys -- Terms and definitions -- Part 1: Materials
Nickel et alliages de nickel -- Termes et définitions -- Partie 1: Matériaux
Ta slovenski standard je istoveten z: ISO 6372-1:1989
ICS:
01.040.77 Metalurgija (Slovarji) Metallurgy (Vocabularies)
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
SIST ISO 6372-1:1997 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 6372-1:1997
---------------------- Page: 2 ----------------------
SIST ISO 6372-1:1997
INTERNATIONAL
6372 ,Fl
STANDARD
First edition
Premiere edition
NORME
1989-07-01
INTERNATIONALE
Nickel and nicke1 alloys - Terms and
definitions -
Part 1 :
Materials
Nickel et alliages de nicke1 - Termes et
definitions -
Partie 1 :
Materiaux
Reference number
Numh-o de reference
ISO 6372-1 : 1989 (E/F)
---------------------- Page: 3 ----------------------
SIST ISO 6372-1:1997
ISO 63724 : 1989 (E/F)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 6372-1 was prepared by Technical Committee ISO/TC 155,
Nickel and nicke/ alloys.
Terms and definitions listed in this part of ISO 6372 have been approved in principle by
the Customs Co-Operation Council KCC) to form the basis of the Harmonized Com-
modity Description and Coding System (Harmonized System) for the revision of
chapter 75 “Nickel” of the CCC-Nomenclature.
ISO 6372 consists of the following Parts, under the general title Nickeland nickelaloys -
Terms and definitions :
-
Part 7 : Materials
- Part 2 : Refinery products
-
Part 3 : Wrought products and castings
0 ISO 1989
All rights reserved. No patt of this publication may be reproduced or utilized in any form or by any
means, electronie or mechanical, including photocopying and microfilm, without Permission in
writing from the publisher./Droits de reproduction reserves. Aucune Partie de cette publication
ne peut etre reproduite ni utilisee sous quelque forme que ce soit et par aucun procede, electroni-
que ou mecanique, y compris Ia photocopie et les microfilms, sans I’accord ecrit de I’editeur.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Printed in Switzerland/lmprime en Suisse
ii
---------------------- Page: 4 ----------------------
SIST ISO 6372-1:1997
ISO 6372-1 : 1989 (E/F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une federation mondiale
d’organismes nationaux de normalisation (comites membres de I’ISO). L’elaboration
des Normes internationales est en general confiee aux comites techniques de I’ISO.
Chaque comite membre interesse par une etude a Ie droit de faire Partie du comite
technique cree a cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent egalement aux travaux. L’ISO col-
labore etroitement avec Ia Commission electrotechnique internationale (GEI) en ce qui
concerne Ia normalisation electrotechnique.
Les projets de Normes internationales adoptes par les comites techniques sont soumis
aux comites membres pour approbation, avant leur acceptation comme Normes inter-
nationales par Ie Conseil de I’ISO. Les Normes internationales sont approuvees confor-
mement aux procedures de I’ISO qui requierent I’approbation de 75 % au moins des
comites membres votants.
La Norme internationale ISO 6372-1 a etc elaboree par Ie comite technique
I SO/TC 155, Nickel et alliages de nicke!.
Les termes et definitions cites dans Ia presente Partie de I’ISO 6372 ont etc approuves
dans leur Principe par Ie Conseil de Cooperation Douaniere (CCD) pour former Ia base
de Systeme Harmonise de Designation et de Codification des marchandises (Systeme
Harmanise) pour Ia revision du chapitre 75, Nickel, de Ia Nomenclature du CCD.
L’ISO 6372 comprend les Parties suivantes, presentees sous Ie titre general Nicke/ et
alliages de nicke/ - Termes et definitions :
- Partie 7 :
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.