Switches for appliances -- Part 1: General requirements

Applies to switches for appliances actuated by hand, by foot or by other human activity for use in, on or with appliances and other equipment for household and similar purposes, with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A. Also covers the indirect actuation of the switch when the function of the actuating member is provided by a part of an appliance or equipment. Replaces EN 60328 (1972).

Geräteschalter - Teil 1: Allgemeine Anforderungen

Interrupteurs pour appareils - Partie 1: Règles générales

Switches for appliances - Part 1: General requirements (IEC 61058-1:2000 + A1:2001, modified)

General Information

Status
Withdrawn
Publication Date
28-Feb-2003
Withdrawal Date
09-Dec-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Dec-2020
Due Date
01-Jan-2021
Completion Date
10-Dec-2020

Relations

Buy Standard

Standard
EN 61058-1:2003
English language
168 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 61058-1:2003

STANDARD
marec 2003
Switches for appliances - Part 1: General requirements (IEC 61058-1:2000 +
A1:2001, modified)
ICS 29.120.40 Referenčna številka
SIST EN 61058-1:2003(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61058-1
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2002
ICS 29.120.40 Supersedes EN 61058-1:1992 + A1:1993
English version
Switches for appliances
Part 1: General requirements
(IEC 61058-1:2000 + A1:2001, modified)
Interrupteurs pour appareils Geräteschalter
Partie 1: Règles générales Teil 1: Allgemeine Anforderungen
(CEI 61058-1:2000 + A1:2001, modifiée) (IEC 61058-1:2000 + A1:2001, modifiziert)
This European Standard was approved by CENELEC on 2002-03-05. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61058-1:2002 E

---------------------- Page: 2 ----------------------

EN 61058-1:2002 - 2 -
Foreword
The text of the International Standard IEC 61058-1:2000, prepared by SC 23J, Switches for
appliances, of IEC TC 23, Electrical accessories, together with the common modifications
prepared by CENELEC Reporting Secretariat SR 23J, was submitted to the formal vote and
was approved by CENELEC as EN 61058-1 on 2002-03-05.
The text of document 23J/232/FDIS, future amendment 1 to IEC 61058-1:2000, was submitted
to the IEC-CENELEC parallel vote and was approved by CENELEC on 2002-03-05 for inclusion
into the European Standard.
This European Standard supersedes EN 61058-1:1992 + A1:1993.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-03-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, C, D, E, K, L, M, N, P, Q, R and ZB are normative and annexes B, F,
G, H, J, S, T and ZA are informative.
Annexes ZA and ZB have been added by CENELEC.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61058-1:2002
Endorsement notice
The text of the International Standard IEC 61058-1:2000 + A1:2001 was approved by
CENELEC as a European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Add in the table of contents:
Annex ZA (informative) - Compliance checks to be carried out for switches for appliances
complying with EN 61058-1:1992 + A1:1993
Annex ZB (normative) - Normative references to international publications with their
corresponding European publications
Add the following annex:
Annex ZA
(informative)
Compliance checks to be carried out for switches for appliances complying with
EN 61058-1:1992 + A1:1993
Introduction
This informative annex relates to changed requirements. It informs where compliance checks
are not required and where compliance checks are required to be carried out in order that a
switch can be declared to meet the requirements of the new edition of EN 61058-1, if this switch
already complies with EN 61058-1:1992 + A1:1993.
Clause 8:
Marking and documentation according to EN 61058-1:1992 + A1:1993 shall be aligned with the
new edition of EN 61058-1, specifically for
- pollution degree,
- rated impulse withstand voltage,
- type and/or connection of switch.
9.1.2 and 9.1.3:
Compliance shall be checked if relevant.
14.2:
Compliance shall be checked for numeral 5 and 6 if relevant.
14.4:
No compliance checks are necessary.
15.3:
No compliance checks are necessary.
Clause 17:
No compliance checks are necessary.

---------------------- Page: 4 ----------------------

EN 61058-1:2002 - 4 -
Clause 20:
Compliance checks are required.
21.1.1 and 21.1.5:
Compliance checks are required.
Clause 25:
No compliance checks are necessary.

---------------------- Page: 5 ----------------------

- 5 - EN 61058-1:2002
Annex ZB
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60034-1 1996 Rotating electrical machines EN 60034-1 1998
(mod) Part 1: Rating and performance + corr. February 2000
A1 1997 A1 1998
A2 1999 A2 1999
1)
IEC 60038 1983 IEC standard voltages HD 472 S1 1989
(mod) + corr. February 2002
IEC 60050-151 1978 International Electrotechnical --
Vocabulary (IEV)
Chapter 151: Electrical and magnetic
devices
IEC 60050-411 1973 Chapter 411: Rotating machinery - -
IEC 60050-441 1984 Chapter 441: Switchgear, controlgear--
and fuses
2)
IEC 60050-826 1982 Chapter 826: Electrical installations of HD 384.2 S2 2001
A1 1990 buildings
A2 1995
3)
IEC 60060-1 1989 High-voltage test techniques HD 588.1 S1 1991
Part 1: General definitions and test
requirements
4)
IEC 60068-2-20 1979 Environmental testing HD 323.2.20 S3 1988
Part 2-20: Tests - Test T: Soldering
IEC 60068-2-75 1997 Part 2-75: Tests - Test Eh: Hammer EN 60068-2-75 1997
tests
IEC 60085 1984 Thermal evaluation and classification HD 566 S1 1990
of electrical insulation

1)
The title of HD 472 S1 is: Nominal voltages for low-voltage public electricity supply systems.
2)
HD 384.2 S2 is based on IEC 60050-826:1982 + A1:1990 + A2:1995 + A3:1999.
3)
HD 588.1 S1 includes corrigendum March 1990 to IEC 60060-1:1989.
4)
HD 323.2.20 S3 is based on IEC 60068-2-20:1979 + A2:1987.

---------------------- Page: 6 ----------------------

EN 61058-1:2002 - 6 -
Publication Year Title EN/HD Year
IEC 60112 1979 Method for determining the HD 214 S2 1980
comparative and the proof tracking
indices of solid insulating materials
under moist conditions
IEC 60127 Series Miniature fuses EN 60127 Series
5)
IEC 60127-2 1989 Part 2: Cartridge fuse-links EN 60127-2 1991
6)
IEC 60228 1978 Conductors of insulated cables HD 383 S2 1986
(mod)
IEC 60228A 1982 Conductors of insulated cables HD 383 S2 1986
(mod) First supplement: Guide to the
dimensional limits of circular
conductors
IEC 60269-1 1998 Low-voltage fuses EN 60269-1 1998
Part 1: General requirements
7)
IEC 60269-3-1 1994 Part 3-1: Supplementary requirements HD 630.3.1 S3 2002
(mod) for fuses for use by unskilled persons
(fuses mainly for household and
similar applications) - Sections I to IV
IEC 60335-1 1991 Safety of household and similar EN 60335-1 1994
(mod) electrical appliances
Part 1: General requirements
A1 (mod) 1994 A1 1996
IEC 60335-2 Series Part 2: Particular requirements EN 60335-2 Series
(mod)
IEC 60364-4-41 1992 Electrical installations of buildings HD 384.4.41 S2 1996
(mod) Part 4: Protection for safety
A1 1996 Chapter 41: Protection against electric
A2 1999 shock
8)
IEC 60364-4-442 1993 Chapter 44: Protection against - -
A1 1995 overvoltages
A2 1999 Section 442: Protection of low-voltage
installations against temporary
overvoltages and faults between high-
voltage systems and earth

5)
EN 60127-2 includes corrigendum March 1990 to IEC 60127-2.
6)
HD 383 S2 is based on IEC 60228:1978 + IEC 60228A:1982.
7)
HD 630.3.1 S3 is based on IEC 60269-3-1:1994 + A1:1995 + A2:2001.
8)
HD 384.4.442 S1:1997 is not an endorsement of, but is related to IEC 60364-4-442:1993 + A1:1995.

---------------------- Page: 7 ----------------------

- 7 - EN 61058-1:2002
Publication Year Title EN/HD Year
IEC 60364-4-443 1995 Section 443: Protection against HD 384.4.443 S1 2000
(mod) overvoltages of atmospheric origin or
A1 1998 due to switching
IEC 60384-14 1993 Fixed capacitors for use in electronic--
equipment
Part 14: Sectional specification: Fixed
capacitors for electromagnetic
interference suppression and
connection to the supply mains
9)
IEC 60417-1 1998 Graphical symbols for use on EN 60417-1 1999
equipment
Part 1: Overview and a
pplication
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993
IEC 60617-2 1996 Graphical symbols for diagrams EN 60617-2 1996
Part 2: Symbol elements, qualifying
symbols and other symbols having
general application
IEC 60664-1 1992 Insulation coordination for equipment HD 625.1 S1 1996
(mod) within low-voltage systems + corr. November 1996
Part 1: Principles, requirements and
tests
IEC 60664-3 1992 Part 3: Use of coatings to achieve HD 625.3 S1 1997
insulation coordination of printed
board assemblies
IEC 60669-1 1998 Switches for household and similar EN 60669-1 1999
(mod) fixed-electrical installations
Part 1: General requirements
10)
IEC 60691 1993 Thermal-links - Requirements and EN 60691 1995
application guide
IEC 60695-2-1/X All Fire hazard testing EN 60695-2-1/X All
sheets Part 2-1: Test methods - Glow wire sheets
IEC 60707 1999 Flammability of solid non-metallic EN 60707 1999
materials when exposed to flame
sources - List of test methods
IEC 60730 Series Automatic electrical controls for EN 60730 Series
(mod) household and similar use
IEC 60730-1 1999 Part 1: General requirements EN 60730-1 2000
(mod) + A11 2002

9)
EN 60417-1:1999 is superseded by EN 60417-1:2002, which is based on IEC 60417-1:2000.
10)
EN 60691 is based on IEC 60691:1993 + A1:1995.

---------------------- Page: 8 ----------------------

EN 61058-1:2002 - 8 -
Publication Year Title EN/HD Year
IEC 60730-2-9 2000 Part 2-9: Particular requirements for EN 60730-2-9 2002
temperature sensing controls
IEC 60738-1 1998 Thermistors - Directly heated positive EN 60738-1 1999
step-function temperature coefficient
Part 1: Generic specification
IEC 60760 1989 Flat, quick-connect terminations - -
IEC 60893-1 1987 Specification for industrial rigid EN 60893-1 1994
laminated sheets based on
thermosetting resins for electrical
purposes
Part 1: Definitions, designations and
general requirements
IEC 60998-2-3 1991 Connecting devices for low-voltage EN 60998-2-3 1993
circuits for household and similar
purposes
Part 2-3: Particular requirements for
connecting devices as separate
entities with insulation piercing
clamping units
IEC 61000 Series Electromagnetic compatibility (EMC) EN 61000 Series
11)
IEC 61000-3-2 1995 Part 3-2: Limits - Limits for harmonic EN 61000-3-2 1995
current emissions (equipment input
current ≤ 16 A per phase)
11)
A1 1997 1998
A1
11)
A2 1998 1998
A2
IEC 61000-3-3 1994 Part 3-3: Limits - Limitation of voltage EN 61000-3-3 1995
changes, voltage fluctuations and + corr. July 1997
flicker in low-voltage power supply
systems for equipment with rated
current ≤ 16 A
IEC/TR2 61000-3-5 1994 Part 3-5: Limits - Limitation of voltage--
fluctuations and flicker in low-voltage
power supply systems for equipment
with rated current greater than 16 A
12)
IEC 61000-4-1 1992 Part 4-1: Testing and measurement EN 61000-4-1 1994
techniques - Overview of immunity
tests
IEC 61000-4-2 1995 Part 4-2: Testing and measurement EN 61000-4-2 1995
techniques - Electrostatic discharge
immunity test
A1 1998 A1 1998

11)
EN 61000-3-2:1995 and its amendments are superseded by EN 61000-3-2:2000, which is based on
IEC 61000-3-2:2000 (mod).
12)
EN 61000-4-1:1994 is superseded by EN 61000-4-1:2000, which is based on IEC 61000-4-1:2000.

---------------------- Page: 9 ----------------------

- 9 - EN 61058-1:2002
Publication Year Title EN/HD Year
13)
IEC 61000-4-3 1995 Part 4-3: Testing and measurement EN 61000-4-3 1996
(mod) techniques - Radiated, radio-
frequency, electromagnetic field
immunity test
A1 1998 A1 1998
IEC 61000-4-4 1995 Part 4-4: Testing and measurement EN 61000-4-4 1995
techniques - Electrical fast
transient/burst immunity test
IEC 61000-4-6 1996 Part 4-6: Testing and measurement EN 61000-4-6 1996
techniques - Immunity to conducted
disturbances, induced by radio-
frequency fields
IEC 61000-4-11 1994 Part 4-11: Testing and measurement EN 61000-4-11 1994
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61032 1997 Protection of persons and equipment EN 61032 1998
by enclosures - Probes for verification
14) 15)
IEC 61058-2-1 - Switches for appliances EN 61058-2-1 1994
Part 2-1: Particular requirements for
core switches
14)
IEC 61058-2-4 - Part 2-4: Particular requirements for
cord switches
ISO 1456 1988 Metallic coatings - Electrodeposited--
coatings of nickel plus chromium and
of copper plus nickel plus chromium
ISO 2081 1986 Metallic coatings - Electroplated--
coatings of zinc on iron or steel
ISO 2093 1986 Electroplated coatings of tin - --
Specification and test methods
ISO 4046 1978 Paper, board, pulp and related terms ---
Vocabulary

13)
EN 61000-4-3:1996 is superseded by EN 61000-4-3:2002, which is based on IEC 61000-4-3:2002.
14)
Undated reference.
15)
Valid edition at date of issue.

---------------------- Page: 10 ----------------------

INTERNATIONAL IEC


STANDARD 61058-1





Edition 3.1
2001-11



Edition 3:2000 consolidated with amendment 1:2001
Switches for appliances –
Part 1:
General requirements

 IEC 2001 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
CR
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 11 ----------------------

61058-1 © IEC:2000+A1:2001 – 3 –
CONTENTS
FOREWORD.11
1 Scope.15
2 Normative references.17
3 Definitions .25
3.1 General terms.25
3.2 Definitions relating to voltages, currents and wattage .31
3.3 Definitions relating to the different types of switches .35
3.4 Definitions relating to the operation of the switch.35
3.5 Definitions relating to connections to the switch .39
3.6 Definitions relating to terminals and terminations .41
3.7 Definitions relating to insulation .43
3.8 Definitions relating to pollution .47
3.9 Definitions relating to manufacturers' tests.47
4 General requirements .47
5 General notes on tests.49
6 Rating.55
7 Classification .57
7.1 Classification of switches.57
7.2 Classification of terminals .69
8 Marking and documentation .87
9 Protection against electric shock. 105
10 Provision for earthing. 109
11 Terminals and terminations. 113
11.1 Terminals for copper conductors. 113
12 Construction .131
12.1 Constructional requirements relating to protection against electric shock. 131
12.2 Constructional requirements relating to safety during mounting
and normal operation of the switch. 133
12.3 Constructional requirements relating to the mounting of switches
and to the attachment of cords. 135
13 Mechanism . 137
14 Protection against solid foreign objects, ingress of dust, water, and humid conditions. 139
14.1 Protection against solid foreign objects . 139
14.2 Protection against ingress of dust . 139
14.3 Protection against ingress of water . 141
14.4 Protection against humid conditions . 143
15 Insulation resistance and dielectric strength . 143
16 Heating. 149
16.1 General requirements . 149
16.2 Contacts and terminals . 149
16.3 Other parts . 153

---------------------- Page: 12 ----------------------

61058-1 © IEC:2000+A1:2001 – 5 –
17 Endurance .161
17.1 General requirements . 161
17.2 Electrical endurance tests. 169
18 Mechanical strength. 185
19 Screws, current-carrying parts and connections . 189
19.1 General requirements for electrical connections . 189
19.2 Screwed connections. 189
19.3 Current-carrying parts. 195
20 Clearances, creepage distances, solid insulation and coatings of rigid
printed board assemblies . 197
20.1 Clearances . 197
20.2 Creepage distances. 203
20.3 Solid insulation . 209
20.4 Coatings of rigid printed board assemblies. 209
21 Resistance to heat and fire . 211
22 Resistance to rusting . 213
23 Abnormal operation and fault conditions for electronic switches. 215
24 Components . 223
24.1 Protective devices . 225
24.2 Capacitors . 229
24.3 Resistors . 231
25 EMC requirements . 231
25.1 Immunity . 233
25.2 Emission . 237
Annex A (normative) Measurement of clearances and creepage distances. 271
Annex B (informative) Diagram for the dimensioning of clearances and
creepage distances . 281
Annex C (normative) Glow-wire test. 283
Annex D (normative) Proof tracking test . 285
Annex E (normative) Ball-pressure test. 287
Annex F (informative) Switch application guide . 289
Annex G (informative) Schematic diagram of families of terminals . 293
Annex H (informative) Flat quick-connect terminations, method for selection
of female connectors.295
Annex J (informative) Selection and sequence of tests of clause 21. 297
Annex K (normative) Relation between rated impulse withstand voltage,
rated voltage and overvoltage category . 299
Annex L (normative) Pollution degree . 301
Annex M (normative) Impulse voltage test . 303
Annex N (normative) Altitude correction factors . 305
Annex P (normative) Types of coatings for rigid printed board assemblies . 307
Annex Q (normative) Measuring the insulation distance of a coated printed board
with type A coating . 309
Annex R (normative)  Routine tests . 311
Annex S (informative) Sampling tests . 313
Annex T (informative) Switch families . 317

---------------------- Page: 13 ----------------------

61058-1 © IEC:2000+A1:2001 – 7 –
Figure 1 – Examples of pillar terminals . 241
Figure 2 – Examples of screw terminals and stud terminals . 243
Figure 3 – Examples of saddle terminals . 245
Figure 4 – Examples of lug terminals. 245
Figure 5 – Examples of mantle terminals . 247
Figure 6 – Examples of screwless terminals . 249
Figure 7 – Tabs of flat quick-connect terminations . 251
Figure 8 – Female (test) connector of flat quick-connect termination. 253
Figure 9a – Circuit for capacitive load test and simulated tungsten filament lamp
load test for a.c. circuits . 255
Figure 9b – Circuit for capacitive load test and simulated lamp load test for d.c. circuits. 255
Figure 10 – Values of the capacitive load test circuit for test
of switches rated 10/100 A 250 V~ . 257
Figure 11 – Mounting device for the impact test. 259
Figure 12 – Ball pressure apparatus . 261
Figure 13 – Test pin . 261
Figure 14 – Continuous duty – Duty type S1 . 263
Figure 15 – Short-time duty – Duty type S2. 265
Figure 16 – Intermittent periodic duty – Duty-type S3 . 267
Figure 17 – Diagram for short-circuit test. 267
Figure 18 – Diagram for heating test. 269
Figure 19 – Diagram for endurance test. 269
Figure Q.1 – Measurement of the insulation distance. 309
Table 1 – Test specimens .53
Table 2 – Type and connection of switches.73
Table 3 – Switch information .89
Table 4 – Resistive current carried by the terminal and related cross-sectional areas
of terminals for unprepared conductors . 115
Table 5 – Maximum diameters of circular copper conductors . 117
Table 6 – Pulling forces for screw-type terminals . 119
Table 7 – Material and plating for tabs. 127
Table 8 – Push and pull forces for tabs.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.