Steel static storage systems - Specification of storage equipment

This standard provides guidance for those needing to specify a pallet racking or shelving requirement to a supplier in order that all relevant safety and other considerations are taken and the supplier is then able to manufacture and deliver a product which is fit for purpose.

Ortsfeste Regalsysteme aus Stahl - Spezifikation von Lagereinrichtungen

Diese Europäische Norm legt die Leitlinien für die technische Spezifikation fest, welche die Konstruktion von
Regalen verschiedener Art ermöglicht, wie z. B. verstellbare Palettenregale, regalförderzeugbediente (RFZbediente)
Regale, Einfahrregale, Kragarmregale, einschließlich deren verschiedene Ausführungsvarianten,
mit manuell bedienten bzw. gesteuerten Fördersystemen. Einige andere Lagersysteme sind nur zum
Teil abgedeckt und weitere Überlegungen außerhalb des Anwendungsbereichs dieses Dokuments sind evtl.
erforderlich.
Diese Europäische Norm bietet dem Verfasser von Lagersystemspezifikationen eine Leitlinie zur Koordination
von sämtlichen Einrichtungslieferanten, einschließlich individueller Zuständigkeiten.
Diese Europäische Norm gilt weder für Lagersysteme aus anderen Werkstoffen als Stahl (mit Ausnahme
einiger Zubehörteile) noch für Lagereinrichtungen im Haushaltsbereich.

Systèmes de stockage en acier - Spécification du système de stockage

La présente Norme européenne fournit des lignes directrices relatives aux spécifications techniques permettant le calcul de systèmes de rayonnage à palettes et à tablettes sous leurs différentes formes, telles que les rayonnages à palettes réglables (APR), les rayonnages à pont roulant, les rayonnages à accumulation statique ouvert sur une face (DIR) ou les rayonnages à palettes et à tablettes en porte-à-faux, comprenant ses différentes formes de construction, équipés de systèmes de manutention mécaniques actionnés et commandés manuellement. D'autres formes de systèmes de stockage ne sont que partiellement abordées et un traitement plus en profondeur, qui ne relève pas du domaine d’application de la présente norme, peut s’avérer nécessaire.
La présente Norme européenne fournit les lignes directrices permettant au rédacteur de spécifications relatives aux systèmes de stockage de coordonner les fournisseurs de l’ensemble des appareils, ainsi que leurs responsabilités individuelles.
La présente Norme européenne ne couvre ni les systèmes de stockage fabriqués à partir de matériaux autres que de l'acier (à l'exception de certains accessoires) ni les équipements de stockage destinés aux particuliers.

Stabilni jekleni sistemi za skladiščenje - Specifikacija opreme za skladiščenje

General Information

Status
Published
Publication Date
03-Dec-2008
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Dec-2008
Due Date
06-Feb-2009
Completion Date
04-Dec-2008

Buy Standard

Standard
EN 15629:2009
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsfeste Regalsysteme aus Stahl - Spezifikation von LagereinrichtungenSystèmes de stockage en acier - Spécification du système de stockageSteel static storage systems - Specification of storage equipment53.080Storage equipmentICS:Ta slovenski standard je istoveten z:EN 15629:2008SIST EN 15629:2009en,fr01-januar-2009SIST EN 15629:2009SLOVENSKI
STANDARD



SIST EN 15629:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15629November 2008ICS 53.080 English VersionSteel static storage systems - Specification of storageequipmentSystèmes de stockage en acier - Spécification du systèmede stockageOrtsfeste Regalsysteme aus Stahl - Spezifikation vonLagereinrichtungenThis European Standard was approved by CEN on 5 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15629:2008: ESIST EN 15629:2009



EN 15629:2008 (E) 2 Contents Page Foreword.4 0 Introduction.5 1 Scope.7 2 Normative references.7 3 Terms and definitions.7 4 Specification data of relevance to the supplier.11 4.1 Storage equipment planning.11 4.2 Storage system structural design.11 4.3 Storage equipment dimensioning.11 4.4 Storage equipment installation.11 5 Specification data of relevance to the user.12 6 Specific information to enable the project to be designed.12 6.1 General.12 6.2 Floor of the building.13 6.2.1 Floor specification.13 6.2.2 Information for the base plate and anchorage design.16 6.2.3 External floors.17 6.3 Rack-supported floors and mezzanines.17 6.4 Provision of edge guarding.19 6.5 Details of goods to be stored.19 6.5.1 Non-palletized goods.19 6.5.2 Palletized goods.19 6.5.3 Special loading accessories, e.g. box pallets, steel bins, skid pallets, roll containers, etc.20 6.5.4 Hazardous goods.20 6.6 Storage equipment design loads.20 6.6.1 General.20 6.6.2 Special considerations for mechanical loading.20 6.6.3 Method of operation.21 6.6.4 Impact provision requirements.21 6.6.5 Back stop specification.21 6.6.6 Pallet-buffering back stops.21 6.6.7 Pallet safety back stops.22 6.6.8 P&D stations.22 6.6.9 Imposed loads from handling equipment.22 6.6.10 Hand-loaded systems.22 6.7 Unit loads.22 6.7.1 Weight of unit loads.22 6.7.2 Overall dimensions.23 6.8 Non-uniform loads.23 6.9 Seismic, wind and snow loads.27 6.10 Environment.27 7 Support by, or very close to, another structure.28 8 Storage system configuration.28 8.1 Building plans.28 8.2 Precautions to reduce risk to personnel due to goods falling from racking or floors.29 8.3 Operational clearances.29 8.3.1 General.29 SIST EN 15629:2009



EN 15629:2008 (E) 3 8.3.2 Racking classifications for pallet racking.30 8.3.3 Horizontal and vertical clearances for pallet racking.30 8.3.4 Aisle width dimensions.30 8.4 Drive-in racking.30 8.4.1 Clearances relating to the placement of pallets.30 8.4.2 Pallet specification.30 8.5 Passageways for pedestrians.30 8.6 Passageways for trucks under or through the racking structure.30 8.7 Means of escape.31 8.8 Free-standing upright protectors.31 9 Safety colours.31 10 Fire safety.31 11 Storage equipment inspections.32 Annex A (informative)
Specifiers’ and users’ responsibilities.33 Annex B (informative)
Suppliers’ responsibilities.34 Bibliography.35
SIST EN 15629:2009



EN 15629:2008 (E) 4 Foreword This document (EN 15629:2008) has been prepared by Technical Committee CEN/TC 344 “Steel static storage systems”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 15629:2009



EN 15629:2008 (E) 5 0 Introduction 0.1 Racking and Shelving as work equipment When specifying the design requirements for racking and shelving, there should be an awareness of national legislation regarding work equipment. This legislation is based upon the European Directives: a) 89/391/EEC: “Concerning measurements to promote the improvement of safety and health for the use of work equipment by workers at work”; b) 89/655/EEC: “Concerning the minimum safety and health requirements for the use of work equipment by workers at work This European Standard should be considered in conjunction with the application and maintenance of storage equipment (See EN 15635). 0.2 Structural Eurocodes for load bearing structures and buildings The determination of the safe load bearing capacity of racking and shelving is a structural engineering task and therefore the Eurocodes are relevant, particularly EN 1993-1-1 and EN 1993-1-3, for the design. The codes and guidelines worked out by CEN/TC 344 are intended to amplify and clarify the requirements of the Eurocodes, since they particularly apply to design, while specification, installation, application and maintenance are considered as special requirements for racking and shelving products. This European Standard covers specification. 0.3 Additional European standards for racking and shelving Due to the differences in the shape of structural components, detailing and connection types, additional technical information to the Eurocodes is required in order to provide state of the art guidance. This guidance is for the client or the consultant specifying the requirement, the practising engineer involved in the design, the installer building the structure and the user who maintains the structure in a sound condition suitable for safe use throughout its working life. This, together with the need to provide harmonized design rules, is the reason why the European Racking Federation (ERF) has taken the initiative with the CEN/TC 344. This Technical Committee is preparing a number of European standards for specific types of racking and shelving used in specific applications as follows: prEN 15512, Steel static storage systems — Adjustable pallet racking systems — Principles for structural design EN 15620, Steel static storage systems — Adjustable pallet racking — Tolerances, deformations and clearances EN 15635, Steel static storage systems — The application and maintenance of storage equipment In drafting these documents, a liaison with other CEN TC's has been carried out as appropriate. SIST EN 15629:2009



EN 15629:2008 (E) 6 0.4 Additional information specific to this document CEN/TC 344 documents may be useful for design cases not covered by the Eurocodes (other structures, other actions, other materials) and to serve as a reference document for other CEN TC's concerning design matters. This European standard is applicable to: a) specifiers of storage equipment; b) committees drafting design-related product, testing and execution standards; c) clients (e.g. for the formulation of their specific requirements); d) designers and constructors; e) relevant authorities. As part of the specification process, reference to prEN 15512, EN 15620 and EN 15635 ensures that both the user and the designer are aware of the constraints in each other’s area and allows an effective design to be produced. SIST EN 15629:2009



EN 15629:2008 (E) 7 1 Scope This European Standard supplies guidelines for the technical specification to allow the design of racking and shelving in its various forms such as adjustable pallet racking (APR), crane serviced racking, drive-in racking (DIR), cantilever racking and shelving systems, including their various forms of construction, using manually operated and controlled mechanical handling systems. Some other forms of storage equipments are only partially covered and further consideration, beyond the scope of this document, may be required. This European Standard gives guidance for the specifier of storage systems to coordinate suppliers of all equipment including individual responsibilities. This European Standard does not cover storage equipments manufactured from materials other than steel (except for certain accessories) and equipment intended to be used for domestic storage purposes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN 15512, Steel static storage systems — Adjustable pallet racking systems — Principles for structural design EN 15620, Steel static storage systems — Adjustable pallet racking — Tolerances, deformations and clearances EN 15635, Steel static storage systems — The application and maintenance of storage equipment 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 adjustable pallet racking
APR steelwork structure consisting of frames and beams adjustable in height, specifically designed to support pallets and unit loads 3.2 bay load total allowable weight of all the unit loads in a bay of racking not including any unit loads that may be stored on the floor of the bay 3.3 compartment load load which can be loaded into one compartment of a racking or shelving structure from one side 3.4 counterbalanced forklift truck rider-operated type of forklift truck that carries its load cantilevered forward of its front main wheel axle and is stabilized with a counter weight at the rear of the truck NOTE This type of truck is a general-purpose truck and may be used in wide-aisle pallet racking systems. SIST EN 15629:2009



EN 15629:2008 (E) 8 3.5 design clearances nominal dimension between items used in the design NOTE These clearances enable input and output of the load to take place without contact of the load with any other loads or any part of the storage system structure other than normal contact when the load is placed on the beams or other members provided for its support in storage. 3.6 double-deep racking racking in which pallets can be stored two deep from one aisle into the installation and accessed by a specially adapted long reach fork mechanism 3.7
drive-in racking DIR system of racking that provides blocks of storage where pallets are stored two or more deep and access is gained by driving a lift truck into a lane with pallets supported along their sides on beam rails supported from the uprights 3.8 drive-through racking system of racking that provides blocks of storage where pallets are stored two or more deep similar to DIR except that the truck can be driven into a lane on one side of the block and out of the other if there are no obstructions 3.9 frame load total allowable weight of all the unit loads transmitted to the frame by the members attached to the frame 3.10 hand pallet truck small hand-operated truck used for moving pallets around on level floors and the pallet is lifted clear of the floor by raising and lowering a tiller bar that operates a hydraulic lifting device 3.11 intrusive stacking placement or retrieval of a pallet where the turning radius or length of a lift truck is greater than the aisle width and part of the pallet storage location concerned is used by the truck forks and load when turning to place or retrieve a pallet 3.12 mechanical handling equipment MHE mechanical equipment used to transport the unit load to be stored 3.13 mezzanine floors RSA additional floor above the ground floor slab level used for storage which can be free standing or attached to the building structure 3.14 narrow-aisle racking pallet racking arranged in a similar way to wide aisle racking but having aisles of a reduced width for use with more specialist types of lift truck SIST EN 15629:2009



EN 15629:2008 (E) 9 3.15 pallet portable platform, with or without superstructure, for the assembly of a quantity of goods to form a unit load for handling and storage by mechanical appliances
3.16 pallet buffer back stop buffering back stop, which is specified as an aid for use by forklift truck drivers to deposit a unit load in the correct position in the racking 3.17 pallet safety back stop safety back stop to prevent accidental collision of a pallet or its load with other unit loads or equipment, when that load is placed in the storage compartment
type (a) safety device, which protects against unintentional load movement within the racking and prevents loads from protruding or from falling into an aisle or into an area accessible to people
type (b) backstop to prevent accidental damage, usually placed at the back of a storage compartment, to prevent the accidental collision of a pallet or its load with other equipment, such as sprinklers, when a load is placed in the storage compartment 3.18 pick up and deposit stations P and D stations storage locations at the end of an aisle used as an interface between different types of mechanical handling equipment NOTE The P and D stations can be used as an interface between the unit load and handling equipment that is dedicated to the rack aisle (such as very narrow aisle (VNA) trucks or cranes) and the conveyors or free movement trucks which service the installation. The P and D stations can also be used to accurately fix the location of the unit load relative to the racking. This is often used by trucks or cranes having a fixed length of fork stroke and ensures accuracy in the X and Z directions when placing the unit load onto the racking beams. 3.19 powered hand pallet truck
small hand-operated truck used for moving pallets around on level floors where the power for lifting and moving the pallet loads is provided by a battery and electric motor. 3.20 reach truck stacking lift truck with outriggers where the load can be repositioned by moving the mast or fork arm carriage NOTE These trucks are generally used in narrow aisle racking because their overall length is less than a counterbalanced lift truck of the same lifting capacity. 3.21 shelving hand-loaded supporting surfaces supported by upright frames 3.22 specified allowable unit load unit load allowed in the storage equipment 3.23 specifier person or company that provides the supplier with a specification based on the user’s requirements NOTE The specifier can be a consultant or other specialist, the end user or the equipment supplier acting as the specifier. SIST EN 15629:2009



EN 15629:2008 (E) 10 3.24 storage equipment structure used to store the unit loads 3.25 straddle-type stacker trucks manually or electrically operated pallet trucks with straddle legs 3.26 supplier company that supplies the storage equipment NOTE The company may be the original manufacturer or an intermediate company acting as a distributor. 3.27 total racking or shelving load total allowable load supported by all the primary load supporting members
NOTE This may be the total load from beams or shelves in a defined area of racking or shelving. 3.28 unit load weight of an individual stored item that can be placed or retrieved in one operation 3.29 user company or person who manages and operates the installation on a daily basis and is responsible for the continuing safety of the installation 3.30 very narrow aisle racking VNA racking pallet racking arranged with aisles of a width to cater only for the truck and the unit load width plus an operational clearance where the truck cannot make 90° turns into the rack face for loading and off loading 3.31 very narrow aisle truck VNA truck rider operated fork lift truck which can work in aisles only slightly wider than the truck or the unit load carried and is fitted with a fork mechanism permitting access on either side of the aisle without turning the main body of the truck. NOTE 1 VNA trucks are normally guided within the aisles. Because of the accuracy required in placing pallets into the racking, these trucks usually pick the pallet loads up from a specially designed P&D station at the entrance to each aisle. NOTE 2 A VNA truck is sometimes known as a Turret Truck. 3.32 wide-aisle racking pallet racking arranged to leave aisles of sufficient width to allow the forklift truck equipment to traverse the length of the aisle and to make 90° turns into the rack face for loading and off loading. 3.33 90° stacking placement or retrieval of a pallet where the forklift truck makes a 90° turn to face the rack during the placement or retrieval process. NOTE In making this turn no part of the truck or load intrudes into the racking. SIST EN 15629:2009



EN 15629:2008 (E) 11 4 Specification data of relevance to the supplier 4.1 Storage equipment planning In order to determine a safe design of the storage equipment to be supplied for the load carrying capacity, the following information shall be provided as a minimum by the user to the specifier: a) details of the site and building in which it shall be housed, its environment, its exposure to wind, snow and seismic conditions; b) properties of the storage equipment foundation, the floor; c) details of the goods to be stored on the equipment including the specification of the load carrying accessory, e.g. pallet, box, bin, etc.; d) specification of the allowable loads for the storage equipment; e) throughput and anticipated configuration of the equipment. The specifier shall consider all operational factors in the evaluation of the risk in the operation (see EN 15620);
NOTE This is to allow sufficient design clearances to be provided for the safe depositing and retrieval of goods. f) specification of the handling equipment to be used, e.g. type of truck etc., in relation to the storage equipment (see EN 15620 for information on truck turning radius and effective aisle width requirements); g) specify if the user shall carry out the installation of the storage equipment; h) all known information about planned future changes to storage requirements; The specifiers' and users' responsibilities are further clarified in Annex A. 4.2 Storage system structural design The supplier, provided with the relevant specification information, shall design the storage equipment in accordance with the relevant European Standards or, if not available, industry codes of practice. The designer may assume that the clearances specified in relation to the material handling equipment intended for use with its operational specification, are such that accidental collision forces may be neglected in the structural design. 4.3 Storage equipment dimensioning For adjustable pallet racking, EN 15620 shall be used in the design and layout to provide guidance on the relevant tolerances, deformations and clearances. 4.4 Storage equipment installation If it is specified that the installation work is not to be undertaken by the supplier, then the supplier shall provide written assembly and installation instructions to their customers on the basis that the installers are experienced and competent for the work involved. NOTE The correct assembly and installation of the storage equipment is of equal importance to the provision of a safe structural design. The persons carrying out the assembly and installation should be trained and experienced in the work to be done and should be properly supervised and controlled to ensure that the health and safety of all persons is safeguarded. The quality and accuracy of the installation work can have a significant effect on the performance and structural integrity of the storage equipment. The supplier’s workforce should be trained to carry out this work efficiently and have the experience to do so safely. SIST EN 15629:2009



EN 15629:2008 (E) 12 5 Specification data of relevance to the user The specifier shall ensure that the user is made aware of all the details of the contract specification provided to the supplier for the design of the installation. In order to maintain the continuing safe use of storage equipment, the user shall ensure the following information specified for its design, construction and operation is taken into account: a) design layout and configuration; b) lift truck make and type specified including characteristic of the lift truck (e.g. dimension, turning radii, etc., see EN 15620); c) adequacy of the floor of the building on which the equipment shall be erected. The floor is the foundation and supports the applied loads including the storage equipment and the MHE and receives the base plate floor fixings; d) avoidance of rapid cooling or heating in cold store that can cause differential expansion or contraction movement between the racking and the concrete floor. Raising or lowering of the store temperature shall be done in such a way that it will not cause harmful differential movements that adversely affect the storage equipment or its floor fixings; e) instructions for assembly and installation provided by the supplier are fully implemented if the user constructs the installation or if a contractor other than the supplier constructs the installation; f) allowable load carrying capacity information that shall be provided by the supplier; g) method of equipment operation shall accord with the design information supplied by the user to the specifier. The lift truck shall be in accordance with the operational conditions (e.g. throughput, safe depositing at height, and moving of VNA trucks at height).
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.