SIST EN ISO 3040:2012
(Main)Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
ISO 3040:2009 establishes the definition of cones and specifies the graphical symbol to be used for their indication and methods for their dimensioning and tolerancing.
For the purposes of ISO 3040:2009, the term “cone” relates to right-angle circular cones only.
Geometrische Produktspezifikation (GPS) - Maßeintragung und Toleranzfestlegung - Kegel (ISO 3040:2009)
Diese Internationale Norm gibt die Definition für Kegel an und legt die graphischen Symbole fest, die für ihre Zeichnungseintragung zu verwenden sind sowie die Methoden für die Maßeintragung und Toleranzfestlegung.
Für den Zweck dieser Internationalen Norm bezieht sich der Begriff „Kegel“ nur auf gerade Kreiskegel.
ANMERKUNG 1 Zur Vereinfachung wurden nur abgeschnittene Kegel in dieser Internationalen Norm dargestellt. Diese internationale Norm kann allerdings innerhalb ihres Anwendungsbereiches auf beliebige Kegeltypen angewendet werden.
ANMERKUNG 2 Es ist nicht die Absicht dieser Internationalen Norm, die Verwendung anderer Methoden der Maßeintragung und Toleranzfestlegung auszuschließen.
Spécification géométrique des produits (GPS) - Cotation et tolérancement - Cônes (ISO 3040:2009)
L'ISO 3040:2009 établit la définition des cônes et spécifie le symbole graphique à utiliser pour leur indication. Elle spécifie également leurs méthodes de cotation et de tolérancement.
Pour les besoins de l'ISO 3040:2009, le terme «cône» se rapporte seulement aux cônes de révolution.
Geometrijska specifikacija proizvoda (GPS) - Dimenzioniranje in toleriranje - Konusi (ISO 3040:2009)
Ta mednarodni standard določa definicijo konusov, grafični simbol za označevanje konusov in metode za dimenzioniranje in toleriranje konusov. V tem mednarodnem standardu se izraz »konus« uporablja samo za pravokotne krožne konuse.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3040:2012
01-julij-2012
Geometrijska specifikacija proizvoda (GPS) - Dimenzioniranje in toleriranje -
Konusi (ISO 3040:2009)
Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO
3040:2009)
Geometrische Produktspezifikation (GPS) - Maßeintragung und Toleranzfestlegung -
Kegel (ISO 3040:2009)
Spécification géométrique des produits (GPS) - Cotation et tolérancement - Cônes (ISO
3040:2009)
Ta slovenski standard je istoveten z: EN ISO 3040:2012
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
17.040.10 Tolerance in ujemi Limits and fits
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
SIST EN ISO 3040:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3040:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 3040:2012
EUROPEAN STANDARD
EN ISO 3040
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2012
ICS 01.100.20
English Version
Geometrical product specifications (GPS) - Dimensioning and
tolerancing - Cones (ISO 3040:2009)
Spécification géométrique des produits (GPS) - Cotation et Geometrische Produktspezifikation (GPS) - Maßeintragung
tolérancement - Cônes (ISO 3040:2009) und Toleranzfestlegung - Kegel (ISO 3040:2009)
This European Standard was approved by CEN on 19 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3040:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3040:2012
EN ISO 3040:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3040:2012
EN ISO 3040:2012 (E)
Foreword
The text of ISO 3040:2009 has been prepared by Technical Committee ISO/TC 213 “Dimensional and
geometrical product specifications and verification” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO 3040:2012 by Technical Committee CEN/TC 290 “Dimensional and
geometrical product specification and verification” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2012, and conflicting national standards shall be
withdrawn at the latest by September 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3040:2009 has been approved by CEN as a EN ISO 3040:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3040:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 3040:2012
INTERNATIONAL ISO
STANDARD 3040
Third edition
2009-12-01
Geometrical product specifications
(GPS) — Dimensioning and tolerancing —
Cones
Spécification géométrique des produits (GPS) — Cotation et
tolérancement — Cônes
Reference number
ISO 3040:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 3040:2012
ISO 3040:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3040:2012
ISO 3040:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Graphical symbol for a cone .2
5 Dimensioning of cones.2
5.1 Characteristics of cones.2
5.2 Indication of rate of taper on drawings.4
5.3 Standardized series of cones.4
6 Tolerancing of cones .5
6.1 General .5
6.2 Tolerancing of cone, cone angle specified.5
6.3 Tolerancing of cone; rate of taper specified.6
6.4 Tolerancing zone of cone simultaneously defining the axial location of the cone.7
6.5 Tolerancing of cone relative to a datum system (simultaneously defining coaxiality) .8
Annex A (informative) Former practice — Tolerancing of cone separate from the tolerance of the
axial location of the cone.9
Annex B (informative) Relation to the GPS matrix model.10
Bibliography.11
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 3040:2012
ISO 3040:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.