SIST EN 4050-3:2014
(Main)Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
This European Standard specifies the requirements for the manufacture, checking and marking of the series of ultrasonic testing reference blocks containing flat bottom holes (FBH) which define the indicated defect size to which reference is made in EN standards.
Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 3: Referenzblöcke
Diese Europäische Norm legt die Anforderungen an Herstellung, Überprüfung und Kennzeichnung der Serie von Ultraschallprüfungs-Referenzblöcken mit Flachbodenbohrungen (FBH) fest, welche die angezeigte Fehlergröße definieren, auf die in EN-Normen verwiesen wird.
Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 3: Blocs de référence
Aeronavtika - Metode za preskušanje kovinskih materialov - Ultrazvočno preskušanje palic, plošč, kovnih materialov in izkovkov - 3. del: Referenčni ingoti
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRþQRLuft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 3: ReferenzblöckeSérie aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des plaques, des stocks de forgeage et de pièces forgées - Partie 3: Blocs de référenceAerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in generalICS:Ta slovenski standard je istoveten z:EN 4050-3:2012SIST EN 4050-3:2014en01-marec-2014SIST EN 4050-3:2014SLOVENSKI
STANDARD
SIST EN 4050-3:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4050-3
September 2012 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings -Part 3: Reference blocks
Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - L'inspection par ultrasons des barres, des assiettes, des stocks de forgeage et de pièces forgées - Partie 3: Blocs de référence
Luft- und Raumfahrt - Prüfverfahren für metallische Werkstoffe - Ultraschallprüfung von Stangen, Platten, Schmiedevormaterial und Schmiedestücken - Teil 3: Referenzblöcke This European Standard was approved by CEN on 15 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4050-3:2012: ESIST EN 4050-3:2014
EN 4050-3:2012 (E) 2 Contents Page Foreword .31Scope .42Generality .43Normative references .44Terms and definitions .45Master test blocks.55.1Materials .55.2Flat bottom holes standards .55.3Manufacture .55.4Checking .76Standard test blocks .76.1Material recommended .76.2FBH standard .76.3Manufacture .76.4Checking .97Special test blocks for round bars and forging stock .9Annex A (normative)
Standard test blocks. 10A.1Specification . 10A.2Examples of standard test blocks. 10 SIST EN 4050-3:2014
EN 4050-3:2012 (E) 3 Foreword This document (EN 4050-3:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at the latest by March 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 4050-3:2014
EN 4050-3:2012 (E) 4 1 Scope This European Standard specifies the requirements for the manufacture, checking and marking of the series of ultrasonic testing reference blocks containing flat bottom holes (FBH) which define the indicated defect size to which reference is made in EN standards. 2 Generality The application of ultrasonic testing reference blocks containing side-drilled holes (SDH) which define an indicated defect size shall be agreed between manufacturer and purchaser. This standard is applicable to the production of master and standard test blocks to be used when carrying out ultrasonic inspection to the requirements of EN 4050-1 (FBH method). It is recognised that particular difficulties are encountered with round forging stock and bars due to the wide range of curvatures. For this application, only one block shall be produced to act as both master and standard test block. 3 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2278, Steel FE-PM 37 — 900 MPa ≤ Rm ≤ 1100 MPa — Bars De ≤ 150 mm — Aerospace series1) EN 2321, Aluminium alloy 2024-T3 — Bars and section a ≤ 150 mm — Aerospace series1) EN 3311, Aerospace series — Titanium alloy TI-64001 — Annealed — 900 MPa ≤ Rm ≤ 1 160 MPa — Bar for machining — De ≤ 150 mm2) EN 4050-1, Aerospace series — Test method for metallic materials — Ultrasonic inspection of bars, plates, forging stock and forgings — Part 1: General requirements EN 4050-2, Aerospace series — Test method for metallic materials — Ultrasonic inspection of bars, plates, forging stock and forgings — Part 2: Performance of test EN 4050-4, Aerospace series — Test method for metallic materials — Ultrasonic inspection of bars, plates, forgings stock and forgings — Part 4: Acceptance criteria ASTM E 127, Standard practice for fabricating and checking aluminium alloy ultrasonic standard reference blocks3) 4 Terms and definitions See EN 4050-1.
1) Published as ASD-STAN Standard at the date of publication of this standard. 2) Published as ASD-STAN Prestandard at the date of publication of this standard. 3) Published by: American Society for Testing and Materials (ASTM) 1916 Race Street, Philadelphia, PA. SIST EN 4050-3:2014
EN 4050-3:2012 (E) 5 5 Master test blocks 5.1 Materials The materials for master test blocks are given in Table 1. Table 1 Alloy class Representative (alloy AECMA designation) Typical application for Standard FBH ∅ (mm)1) Correction for attenuation Old New A 2024 (EN 2321) AL-P2024- Aluminium alloys 0,8 no B1 FE-PM37 (EN 2278) FE-PM1502 Nickel-cobalt alloys (grain size ASTM 5 or finer) Martensitic stainless steels P.M. super alloys 0,4 no B2 FE-PM37 (EN 2278) FE-PM1502 Nickel-cobalt alloys (grain size ASTM 4 or coarser) Austenitic steels 1,2 yes C TI-P63 TI-P64001 (EN 3311) Titanium or Titanium alloys 0,8 yes 1) Where long metal paths make the standard FBH quoted above impractical then larger sized FBH’s shall be used with agreement between manufacturer and purchaser and shall be referenced on the order or in an inspection schedule.
5.2 Flat bottom holes standards Flat bottom holes in the master test blocks shall be used to calibrate standard test blocks. The master test blocks shall have FBH at different metal paths to suit the product range to be inspected. It shall be ensured however that there is sufficient number with a minimum of three different metal paths to accurately produce the required distance/amplitude curve (see 5.4.2.2). 5.3 Manufacture 5.3.1 Material procurement Material for each set of master test blocks shall be obtained from the same cast, forging and heat treatment batch.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.