SIST EN 16810:2017
(Main)Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules
This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings.
This standard applies to the following types of floor coverings:
- resilient floor coverings manufactured from plastics, linoleum, cork or rubber, including loose-laid mats;
- textile floor coverings, including loose-laid mats, rugs and runners;
- laminate floor coverings;
- modular floating floor coverings panels;
An EPD may be developed for single or individual products, product groups and average products.
Elastische, textile und Laminat-Bodenbeläge - Umwelt-Produktdeklarationen - Produktkategorieregeln
Diese Europäische Norm liefert Produktkategorieregeln (PCR) für Typ III Umweltdeklarationen (EPD) für elastische, textile und Laminat-Bodenbeläge.
Die vorliegende Norm gilt für die folgenden Arten von Bodenbelägen:
- elastische Bodenbeläge, die aus Kunststoff, Linoleum, Kork oder Kautschuk hergestellt sind, ein-schließlich lose verlegter Matten;
- textile Bodenbeläge, einschließlich lose verlegter Matten, Teppichen und Läufern;
- Laminat-Bodenbeläge;
- schwimmende modulare Bodenplatten.
Eine EPD darf für einzelne oder individuelle Produkte, Produktgruppen und Durchschnittsprodukte entwickelt werden.
Revêtements de sol résilients, textiles et stratifiés - Déclarations environnementales des produits - Règles régissant les catégories de produits
La présente Norme européenne fournit le tronc commun des règles de catégories de produits (PCR) pour les déclarations environnementales des produits (DEP) de Type III relatives aux revêtements de sol résilients, textiles et stratifiés.
La présente norme s’applique aux types de revêtements de sol suivants :
- revêtements de sol résilients fabriqués à partir de matière plastique, de linoléum, de liège ou de caoutchouc, y compris les mats destinés à la pose flottante ;
- revêtements de sol textiles, y compris les mats destinés à la pose flottante, les carpettes et les tapis ;
- revêtements de sol stratifiés ;
- panneaux de revêtement de sol modulaires flottants.
Une DEP peut être établie pour des produits uniques ou individuels, des groupes de produits et des produits standards.
Netekstilne, tekstilne in laminirane talne obloge - Okoljske deklaracije za proizvode - Pravila za opredelitev vrste izdelka
Ta evropski standard vsebuje osnovna pravila za opredelitev vrste izdelka (PCR) za okoljske deklaracije tipa III za netekstilne, tekstilne in laminatne talne obloge. Ta pravila za opredelitev vrste izdelka zajemajo naslednje talne obloge v skladu s standardom EN 14041: – netekstilne talne obloge iz plastike, linoleja, plutovine ali gume, vključno z nepritrjenimi podlogami; – tekstilne talne obloge, vključno z nepritrjenimi podlogami in preprogami; – laminirane talne podloge. Ta standard se uporablja tudi za večplastne modularne talne panele. Okoljska deklaracija izdelka (EPD) se lahko izdela za en izdelek ali posamezne izdelke, skupine izdelkov in povprečni izdelek.
General Information
Relations
Overview
EN 16810:2017 specifies Product Category Rules (PCR) for Type III Environmental Product Declarations (EPD) for resilient, textile and laminate floor coverings. It defines a harmonized framework to produce verifiable environmental information for floor coverings manufactured from plastics, linoleum, cork or rubber (including loose-laid mats), textile floor coverings (including rugs, runners and loose-laid mats), laminate floor coverings and modular floating floor panels. An EPD under EN 16810:2017 may cover a single product, a product group or an average product.
Key Topics
- Product Category Rules (PCR): Core requirements for consistent EPD content and format specific to floor coverings.
- Life Cycle Assessment (LCA): Rules for life cycle stages and information modules to be included (cradle-to-gate, cradle-to-grave options), aligned with EN 15804 and EN ISO 14040/14044.
- Declared Unit: Use of 1 m² of installed floor covering as the reference declared unit for comparability.
- Inventory and Calculation Rules: Guidance for life cycle inventory (LCI) data, allocation, co-products, and treatment of recycled content.
- Biogenic Carbon Accounting: Principles for how biogenic carbon flows are considered during the life cycle.
- Impact Assessment Parameters: Predetermined environmental indicators to be reported from the LCA.
- EPD Content & Reporting: Required general product information, LCA-derived parameters, scenarios (use, maintenance, end-of-life) and aggregation of information modules.
- Verification & Validity: Requirements for third‑party verification, project reporting and data availability.
- Reference Service Life (RSL): Annexed guidance on RSL and its role in scenarios and performance assumptions.
- Comparability & Communication: Rules to ensure EPDs are comparable across manufacturers and suited for business-to-business communication.
Applications
Who uses EN 16810:2017 and why:
- Flooring manufacturers - to develop standardized, verifiable EPDs for product marketing and green procurement.
- EPD programme operators and verifiers - to ensure declarations meet industry-specific PCR requirements.
- Specifiers, architects and consultants - to assess environmental performance in material selection and LCA-based decisions.
- Procurement teams and building owners - to compare products in sustainable procurement and support green building certification.
Practical uses include creating transparent environmental declarations, enabling LCA-based procurement decisions, and supporting product improvement and compliance with sustainability policies.
Related Standards
- EN 15804 (core rules for construction product EPDs)
- EN ISO 14025 (Type III environmental declarations)
- EN ISO 14040 / 14044 (LCA principles and requirements)
- ISO 21930 (environmental declaration of building products)
- EN 16485 (EPD PCR for wood products)
Keywords: EN 16810:2017, PCR, EPD, Type III environmental product declaration, resilient floor coverings, textile floor coverings, laminate floorings, LCA, declared unit, reference service life.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne, tekstilne in laminirane talne obloge - Okoljske deklaracije za proizvode - Pravila za opredelitev vrste izdelkaElastische, textile und Laminat-Bodenbeläge - Umwelt-Produktdeklarationen - ProduktkategorieregelnRevêtements de sol résilients, textiles et stratifiés - Déclarations environnementales des produits - Règles régissant les catégories de produitsResilient, textile and laminate floor coverings - Environmental product declarations - Product category rules97.150Talne oblogeFloor coverings13.020.20Okoljska ekonomija. TrajnostnostEnvironmental economics. SustainabilityICS:Ta slovenski standard je istoveten z:EN 16810:2017SIST EN 16810:2017en,fr,de01-julij-2017SIST EN 16810:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16810
May
t r s y ICS
s uä r t rä w râ
{ yä s w r English Version
Resilientá textile and laminate floor coverings æ Environmental product declarations æ Product category rules Revêtements de sol résilientsá textiles et stratifiés æ Déclarations environnementales des produits æ Règles régissant les catégories de produits
Elastischeá textile und LaminatæBodenbeläge æ UmweltæProduktdeklarationen æ Produktkategorieregeln This European Standard was approved by CEN on
s u February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z s rã t r s y ESIST EN 16810:2017
Requirements and guidance on the reference service life . 39 Annex B (Informative)
Reference Service Life (RSL) for floor covering . 43 Annex C (Informative)
Waste . 44 Bibliography . 45
BUILDING ASSESSMENT INFORMATION BUILDING LIFE CYCLE INFORMATION
SUPPLEMENTARY INFORMATION BEYOND THE BUILDING LIFE CYCLE A 1–3 A 4–5 B 1–7 C 1–4 D PRODUCT STAGE CONSTRUCTION PROCESS STAGE USE STAGE END OF LIFE STAGE Benefits and loads beyond the system boundary A1 A2 A3 A4 A5 B1 B2 (1yr) B3 B4 B5 C1 C2 C3 C4
Raw material supply Transport Manufacturing Transport Construction or installation process Use Maintenance Repair Replacement Refurbishment De-construction demolition Transport Waste processing Disposal Reuse, recovery, recycling potential
scenario scenario scenario
B6 Operational energy use
scenario B7 Operational water use scenario Cradle to grave (functional unit) M M 1) 2) M 1) 2)
M 1) 2)
M 1) 2) M 1) 2) M 1) 2) M 1) 2) RSL (2) M M = mandatory; 1) inclusion for a declared scenario; 2) if all scenarios are given SIST EN 16810:2017
...
Frequently Asked Questions
SIST EN 16810:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Resilient, textile and laminate floor coverings - Environmental product declarations - Product category rules". This standard covers: This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings. This standard applies to the following types of floor coverings: - resilient floor coverings manufactured from plastics, linoleum, cork or rubber, including loose-laid mats; - textile floor coverings, including loose-laid mats, rugs and runners; - laminate floor coverings; - modular floating floor coverings panels; An EPD may be developed for single or individual products, product groups and average products.
This European standard provides product category rules (PCR) for Type III environmental product declarations (EPD) for resilient, textile and laminate floor coverings. This standard applies to the following types of floor coverings: - resilient floor coverings manufactured from plastics, linoleum, cork or rubber, including loose-laid mats; - textile floor coverings, including loose-laid mats, rugs and runners; - laminate floor coverings; - modular floating floor coverings panels; An EPD may be developed for single or individual products, product groups and average products.
SIST EN 16810:2017 is classified under the following ICS (International Classification for Standards) categories: 13.020.20 - Environmental economics. Sustainability; 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 16810:2017 has the following relationships with other standards: It is inter standard links to oSIST prEN 16810:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 16810:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/119. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 16810:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
記事のタイトル：SIST EN 16810:2017 - 耐久性があるテキスタイルおよびラミネート床材 - 環境製品宣言 - 製品カテゴリールール 記事内容：このヨーロッパ規格は、耐久性があるテキスタイルおよびラミネート床材に対するタイプIII環境宣言のための製品カテゴリールール（PCR）を提供します。このPCRは、EN 14041に従って以下の床材を対象としています： - プラスチック、リノリウム、コルク、またはゴムで製造された耐久性床材（敷き詰めマットを除く） - テキスタイル床材（敷き詰めマットおよびラグを除く） - ラミネート床材 この規格は、多層モジュール式床パネルにも適用されます。環境製品宣言は、単一または個別の製品、製品グループ、および平均製品に対して開発することができます。
記事のタイトル：SIST EN 16810:2017 - 弾性、繊維およびラミネート床材 - 環境製品宣言 - 製品カテゴリールール 記事の内容：この欧州標準は、弾性、繊維、およびラミネート床材のためのタイプIIIの環境宣言に対する製品カテゴリールール（PCR）を提供します。 このPCRは、EN 14041に従って次の床材に適用されます： - プラスチック、リノリウム、コルク、またはゴムで作られた弾性床材で、敷き詰められたマットを除く。 - 繊維床材で、敷き詰められたマットやラグを除く。 - ラミネート床材。 この標準は、また、多層モジュラー床パネルにも適用されます。 環境製品宣言は、単一または個別の製品、製品グループ、および平均製品のために作成することができます。
제목: SIST EN 16810:2017 - 탄성, 직물 및 라미네이트 바닥재 - 환경 제품 선언 - 제품 범주 규칙 내용: 이 유럽 표준은 탄성, 직물 및 라미네이트 바닥재에 대한 유형 III 환경 선언을 위한 제품 범주 규칙을 제공합니다. 이 PCR은 EN 14041에 따라 다음과 같은 바닥재에 적용됩니다: - 플라스틱, 리놀렘, 코르크 또는 고무로 제조된 탄성 바닥재, 그러나 누출되지 않는 매트를 제외합니다. - 직물 바닥재, 그러나 누출되지 않는 매트와 러그를 제외합니다. - 라미네이트 바닥재; 이 표준은 또한 다중층 모듈식 바닥 패널에도 적용됩니다. 환경 제품 선언은 단일 제품, 제품 그룹 및 평균 제품을 위해 개발될 수 있습니다.
The article discusses the SIST EN 16810:2017 European standard which provides product category rules for environmental product declarations for resilient, textile, and laminate floor coverings. This standard covers various types of floor coverings including resilient floor coverings made from plastics, linoleum, cork, or rubber, textile floor coverings, and laminate floor coverings. It also applies to multi-layer modular floor panels. The environmental product declarations can be developed for single or individual products, product groups, and average products.
The article discusses the European standard, SIST EN 16810:2017, which provides product category rules for environmental declarations for resilient, textile, and laminate floor coverings. The standard covers various types of floor coverings, including resilient floor coverings made from plastics, linoleum, cork, or rubber, textile floor coverings (excluding loose-laid mats and rugs), laminate floor coverings, and multi-layer modular floor panels. The standard allows for the development of environmental product declarations for single or individual products, product groups, and average products.
기사 제목: SIST EN 16810:2017 - 탄력성이 있는 직물과 라미네이트 바닥재 - 환경 제품 선언 - 제품 범주 규칙 기사 내용: 이 유럽 표준은 탄력성이 있는 직물과 라미네이트 바닥재에 대한 유형 III 환경 선언을 위한 제품 범주 규칙 (PCR)을 제공한다. 이 PCR은 EN 14041에 따라 다음과 같은 바닥재를 다루고 있다: - 플라스틱, 리놀렘, 코르크 또는 고무로 제조된 탄력성 바닥재 (유동 매트 제외) - 직물 바닥재 (유동 매트와 양탄자 제외) - 라미네이트 바닥재 이 표준은 다층 모듈식 바닥 패널에도 적용된다. 환경 제품 선언은 단일 제품, 제품 그룹 및 평균 제품에 대해 개발될 수 있다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...