iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61204-7:2007/A11:2009

(Amendment)

Low voltage power supplies, d.c. output - Part 7: Safety requirements

Low voltage power supplies, d.c. output - Part 7: Safety requirements

D133/C155: To reconsider possible listing of EN 61204-7:2006 under LVD pending availability of this amendment

Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Teil 7: Sicherheitsanforderungen

Alimentations basse tension, sortie continue - Partie 7: Exigences de sécurité

Nizkonapetostni napajalniki, enosmerni (d.c.) izhod - 7. del: Varnostne zahteve

General Information

Status
Withdrawn
Publication Date
18-Aug-2009
Withdrawal Date
15-Apr-2021
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
I11 - Imaginarni 11
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Apr-2021
Due Date
02-May-2021
Completion Date
16-Apr-2021
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Ref Project
EN 61204-7:2006/A11:2009 - Low voltage power supplies, d.c. output - Part 7: Safety requirements

Relations

Amends
SIST EN 61204-7:2007 - Low voltage power supplies, d.c. output -- Part 7: Safety requirements
Effective Date
01-Sep-2009
Replaced By
SIST EN IEC 61204-7:2018 - Low-voltage switch mode power supplies - Part 7: Safety requirements (IEC 61204-7:2016)
Effective Date
20-Mar-2018
Replaced By
SIST EN IEC 61204-7:2018 - Low-voltage switch mode power supplies - Part 7: Safety requirements (IEC 61204-7:2016)
Effective Date
07-Jun-2022
Amends
SIST EN 61204-7:2007 - Low voltage power supplies, d.c. output -- Part 7: Safety requirements
Effective Date
29-Jan-2023
Amends
SIST EN 61204-7:2007 - Low voltage power supplies, d.c. output -- Part 7: Safety requirements
Effective Date
07-Jun-2022

Buy Standard

EN 61204-7:2007/A11:2009EN 61204-7:2007/A11:2009
PreviousNext
Amendment
EN 61204-7:2007/A11:2009
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61204-7:2007/A11:2009
01-september-2009
Nizkonapetostni napajalniki, enosmerni (d.c.) izhod - 7. del: Varnostne zahteve
Low voltage power supplies, d.c. output - Part 7: Safety requirements
Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Teil 7:
Sicherheitsanforderungen
Alimentations basse tension, sortie continue - Partie 7: Exigences de sécurité
Ta slovenski standard je istoveten z: EN 61204-7:2006/A11:2009
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 61204-7:2007/A11:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61204-7:2007/A11:2009

---------------------- Page: 2 ----------------------

SIST EN 61204-7:2007/A11:2009

EUROPEAN STANDARD
EN 61204-7/A11

NORME EUROPÉENNE
June 2009
EUROPÄISCHE NORM

ICS 29.200


English version


Low voltage power supplies, d.c. output -
Part 7: Safety requirements



Alimentations basse tension,  Stromversorgungsgeräte
sortie continue - für Niederspannung
Partie 7: Exigences de sécurité mit Gleichstromausgang -
Teil 7: Sicherheitsanforderungen





This amendment A11 modifies the European Standard EN 61204-7:2006; it was approved by CENELEC on
2009-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62040-1:2019(Main)
Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017)
EN IEC 62040-1:2019

This standard applies to movable, stationary, fixed or built-in UPS for use in lowvoltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1000 V AC or 1500 V DC and that include an energy storage device. It applies to pluggable and to permanently connected UPS, whether consisting of a system of interconnected units or of independent units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. Alternative devices exist, and as such, where "battery" appears in the text of this document, this is to be understood as "energy storage device". This document specifies requirements to ensure safety for the ordinary person who comes into contact with the UPS and, where specifically stated, for the skilled person. The objective is to reduce risks of fire, electric shock, thermal, energy and mechanical hazards during use and operation and, where specifically stated, during service and maintenance. This product standard is harmonized with the applicable parts of group safety publication IEC 62477-1:2012 for power electronic converter systems and contains additional requirements relevant to UPS. This document does not cover: - UPS that have a DC output; - systems for operation on moving platforms including, but not limited to, aircrafts, ships and motor vehicles; - external AC or DC input and output distribution boards covered by their specific product standard; - stand-alone static transfer systems (STS) covered by IEC 62310-1; - systems wherein the output voltage is directly derived from a rotating machine; - telecommunications apparatus other than UPS for such apparatus; - functional safety aspects covered by IEC 61508 (all parts).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-5-1:2008/A1:2017(Amendment)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2007/A1:2016)
EN 61800-5-1:2007/A1:2017

2017-05-02: D156/C084 - Ratified standards not being made available.
Published following BT156/DG10475/DV

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-5-2:2017(Main)
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional (IEC 61800-5-2:2016)
EN 61800-5-2:2017

This part of IEC 61800, which is a product standard, specifies requirements and makes
recommendations for the design and development, integration and validation of safety related
power drive systems (PDS(SR)) in terms of their functional safety considerations. It applies to
adjustable speed electrical power drive systems covered by the other parts of the IEC 61800
series of standards as referred in IEC 61800-2.
NOTE 1 The term “integration” refers to the PDS(SR) itself, not to its incorporation into the safety-related
application.
NOTE 2 Other parts of IEC 61800 cover rating specifications, EMC, electrical safety, etc.
This International Standard is applicable where functional safety of a PDS(SR) is claimed and
the PDS(SR) is operating mainly in the high demand or continuous mode (see 3.15)
While low demand mode operation is possible for a PDS(SR), this standard concentrates on
high demand and continuous mode. Safety sub-functions implemented for high demand or
continuous mode can also be used in low demand mode. Requirements for low demand mode
are given in IEC 61508 series. Some guidance for the estimation of average probability of
dangerous failure on demand (PFDavg) value is provided in Annex F.
This part of IEC 61800 sets out safety-related considerations of PDS(SR)s in terms of the
framework of IEC 61508, and introduces requirements for PDS(SR)s as subsystems of a
safety-related system. It is intended to facilitate the realisation of the electrical/ electronic/
programmable electronic (E/E/PE) parts of a PDS(SR) in relation to the safety performance of
safety sub-function(s) of a PDS.
Manufacturers and suppliers of PDS(SR)s by using the normative requirements of this part of
IEC 61800 will indicate to users (system integrator, original equipment manufacturer) the
safety performance for their equipment. This will facilitate the incorporation of a PDS(SR) into
a safety-related control system using the principles of IEC 61508, and possibly its specific
sector implementations (for example IEC 61511, IEC 61513, IEC 62061 or ISO 13849).
By applying the requirements from this part of the IEC 61800 series, the corresponding
requirements of IEC 61508 that are necessary for a PDS(SR) are fulfilled.
This part of IEC 61800 does not specify requirements for:
• the hazard and risk analysis of a particular application;
• the identification of safety sub-functions for that application;
• the initial allocation of SILs to those safety sub-functions;
• the driven equipment except for interface arrangements;
• secondary hazards (for example from failure in a production or manufacturing process);
• the electrical, thermal and energy safety considerations, which are covered in
+IEC 61800-5-1;
• the PDS(SR) manufacturing process;
• the validity of signals and commands to the PDS(SR).
• security aspects (e.g. cyber security or PDS(SR) security of access)
NOTE 3 The functional safety requirements of a PDS(SR) are dependent on the application, and can be
considered as a part of the overall risk assessment of the installation. Where the supplier of the PDS(SR) is not
responsible for the driven equipment, the installation designer is responsible for the risk assessment, and for
specifying the functional and safety integrity requirements of the PDS(SR).
This part of IEC 61800 only applies to PDS(SR)s implementing safety sub-functions with a SIL
not greater than SIL 3.
Figure 1 shows the installation and the functional parts of a PDS(SR) that are considered in
this part of IEC 61800 and shows a logical representation of a PDS(SR) rather than its
physical description.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62477-1:2012/A1:2017(Amendment)
Safety requirements for power electronic converter systems and equipment - Part 1: General (IEC 62477-1:2012/A1:2016)
EN 62477-1:2012/A1:2017

2017-05-02: D156/C084 - Ratified standards not being made available.

  • Amendment
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62040-5-3:2017(Main)
Uninterruptible power systems (UPS) - Part 5-3: d.c. output UPS - Performance and test requirements (IEC 62040-5-3:2016)
EN 62040-5-3:2017

This part of IEC 62040 establishes the performance and test requirements applied to
movable, stationary and fixed electronic DC uninterruptible power systems (DC UPS) that
– are supplied from an AC voltage source not exceeding 1 000 V,
– deliver a DC output voltage not exceeding 1 500 V,
– incorporate an energy storage device, and
– have a primary function to ensure continuity of DC power to loads.
This document specifies performance and test requirements of a complete DC UPS and not of
individual DC UPS functional units. The individual DC UPS functional units are dealt with
in IEC publications referred to in the bibliography that apply so far that they are not in
contradiction with this document.
DC UPSs have been developed over a wide range of power, from less than a hundred watts
to megawatts, to meet requirements for availability and quality of power to a variety of loads.
Refer to Annexes A and B for information on typical DC UPS configurations and topologies.
This document also includes DC UPS performance and test requirements related to
interrupters, isolating switches, and tie switches, if any, which are integral to the DC UPS.
These components interact with other functional units of the DC UPS to maintain continuity
of load power.
This document does not cover
– conventional AC input distribution boards and their associated switches,
– conventional DC distribution boards and their associated switches,
– conventional AC UPSs covered by IEC 62040-3,
– low-voltage DC power supply devices covered by a specific product standard, for example
IEC 61204, and those covered by a specific product standard, for example ITU
communication standards, and
– systems wherein the output voltage is derived from a rotating machine.
NOTE 1 This document recognises that power availability to information technology (IT) equipment represents a
major UPS application. The DC UPS output characteristics specified in this document are therefore also aimed at
ensuring compatibility with the requirements of IT equipment. This, subject to any limitation stated in the
manufacturer’s declaration, includes requirements for steady state and transient voltage variation as well as for
the supply of both resistive and constant power load characteristics of IT equipment.
NOTE 2 Test loads specified in this document simulate both resistive and constant power load characteristics.
Their use is prescribed with the objective of verifying design and performance, as declared by the manufacturer,
and also of minimising any complexity and energy consumption during the tests.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61803:2001/A2:2016(Amendment)
Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:1999/A2:2016)
EN 61803:1999/A2:2016

Applies to all line-commutated high-voltage direct current (HVDC) converter stations used for power exchange in utility systems. Presumes the use of 12-pulse thyristor converters but can also be used for 6-pulse thyristor converters. Presents procedures for determining the total losses of an HVDC converter station. Cover all parts, except synchronous compensators or static var compensators and address no-load operation and operating losses together with their methods of calculation which use, wherever possible, measured parameters.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-201:2016(Main)
Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
EN 61800-7-201:2016

This part of IEC 61800 specifies profile type 1 for power drive systems (PDS). Profile type 1
can be mapped onto different communication network technologies.
The functions specified in this part of IEC 61800 are not intended to ensure functional safety.
This requires additional measures according to the relevant standards, agreements and laws.

  • Standard
    196 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-301:2016(Main)
Adjustable speed electrical power drive systems -- Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies
EN 61800-7-301:2016

This part of IEC 61800 specifies the mapping of the profile type 1 (CiA 402) specified in
IEC 61800-7-201 onto different network technologies.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.
– CANopen, see Clause 5;
– CC-Link IE Field, see Clause 6;
– EPA, see Clause 7;
– EtherCAT, see Clause 8;
– ETHERNET Powerlink, see Clause 9;

  • Standard
    160 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-302:2016(Main)
Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
EN 61800-7-302:2016

This part of IEC 61800 specifies the mapping of the profile type 2 (CIP MotionTM) specified in
IEC 61800-7-202 onto different network technologies.
– DeviceNet™ (CP 2/3), see Clause 5,
– ControlNet™ (CP 2/1), see Clause 6,
– EtherNet/IP™ (CP 2/2), see Clause 7.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-303:2016(Main)
Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies
EN 61800-7-303:2016

This part of IEC 61800 specifies the mapping of the profile type 3 (PROFIdrive) specified in
IEC 61800-7-203 onto different network technologies.
– PROFIBUS DP, see Clause 4,
– PROFINET IO, see Clause 5.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day