SIST EN 15882-3:2009
(Main)Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals
Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals
The purpose of this European Standard is to provide the principles and guidance for the preparation of extended application documents for penetration sealing systems tested in accordance with EN 1366-3. The field of the extended application document is additional to the direct field of application given within EN 1366-3 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application. It should be noted that this European Standard provides general guidance on the likely effects of a change. It gives no guidance as to the magnitude, nor how this magnitude is evaluated. Composite pipes comprising both metallic and plastics components are not covered by this European Standard.
Erweiterter Anwendungsbereich der Ergebnisse aus Feuerwiderstandsprüfungen für Installationen - Teil 3: Abschottungen
Application étendue des résultats des essais de résistance au feu - Partie 3: Calfeutrements de trémie
La présente Norme européenne a pour objectif de fournir des principes et des lignes directives pour
l’élaboration de documents d’application étendue relatifs aux systèmes de calfeutrement pour traversées
ayant été soumis à l’essai conformément à l’EN 1366-3. Par rapport au domaine d’application directe décrit
dans l’EN 1366-3, le domaine d’application étendue est complémentaire, et peut s’appliquer à un seul ou
plusieurs essais ou être fondé sur ces derniers, lesquels fournissent les informations pertinentes permettant
de formuler une application étendue.
Il convient de noter que la présente Norme européenne fournit des lignes directives générales sur les effets
probables d’une modification. Elle ne donne aucun conseil sur l’ampleur de ladite modification, ni sur la
manière de l’évaluer.
La présente Norme européenne ne traite pas des tuyaux composites comportant des éléments métalliques et
des éléments en matière plastique.
Razširjena uporaba rezultatov preskusov požarne odpornosti servisnih inštalacij - 3. del: Tesnitve prebojev
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Razširjena uporaba rezultatov preskusov požarne odpornosti servisnih inštalacij - 3. del: Tesnitve prebojevErweiterter Anwendungsbereich der Ergebnisse aus Feuerwiderstandsprüfungen für Installationen - Teil 3: AbschottungenExtended applications of results from fire resistance tests for service installations - Part 3: Penetration seals13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 15882-3:2009SIST EN 15882-3:2009en,de01-julij-2009SIST EN 15882-3:2009SLOVENSKI
STANDARD
SIST EN 15882-3:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15882-3March 2009ICS 13.220.50 English VersionExtended applications of results from fire resistance tests forservice installations - Part 3: Penetration sealsApplication étendue des résultats des essais de résistanceau feu - Partie 3 : CalfeutrementsErweiterter Anwendungsbereich der Ergebnisse ausFeuerwiderstandsprüfungen - Teil 3 : AbschottungenThis European Standard was approved by CEN on 11 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15882-3:2009: ESIST EN 15882-3:2009
EN 15882-3:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Extended application principles .7 4.1 General .7 4.2 Principles common to all generic seal types .7 5 Extended application report . 10 5.1 Contents of the extended application report . 10 5.2 Review of the extended application report . 11 Annex A (normative)
Extended application principles for generic penetration seal types . 12 A.1 Introduction . 12 A.1.1 General . 12 A.1.2 Permissible size variations for wall applications . 13 A.2 Specific rules . 14 A.2.1 Bellows . 14 A.2.2 Blocks / plugs . 14 A.2.3 Boards . 14 A.2.4 Foams . 15 A.2.5 Modular systems. 15 A.2.6 Pillows . 15 A.2.7 Pipe closure devices . 15 A.2.8 Sealants/mastics/putties . 16 Annex B (informative)
Additional information relating to the extended application of test results on plastic pipes . 17
SIST EN 15882-3:2009
EN 15882-3:2009 (E) 3 Foreword This document (EN 15882-3:2009) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document was submitted to Enquiry under the reference prEN 15080-14. EN 15882 "Extended applications of results from fire resistance tests for service installations" consists of the following Parts: Part 1: Fire resisting ducts Part 2: Dampers Part 3: Penetration seals Part 4: Linear joint seals This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15882-3:2009
EN 15882-3:2009 (E) 4 1 Scope The purpose of this European Standard is to provide the principles and guidance for the preparation of extended application documents for penetration sealing systems tested in accordance with EN 1366-3. The field of the extended application document is additional to the direct field of application given within EN 1366-3 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application. It should be noted that this European Standard provides general guidance on the likely effects of a change.
It gives no guidance as to the magnitude, nor how this magnitude is evaluated.
Composite pipes comprising both metallic and plastics components are not covered by this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1:1999, Fire resistance tests — Part 1: General requirements EN 1363-2:1999, Fire resistance tests — Part 2: Alternative and additional procedures EN 1366-3: 2004, Fire resistance tests for service installations — Part 3: Penetration seals EN 13501-1:2007, Fire classification of construction products and building elements —
Part 1: Classification using test data from reaction to fire tests EN 13501-2:2007, Fire classification of construction products and building elements —
Part 2: Classification using data from fire resistance tests, excluding ventilation services EN ISO 13943:2000, Fire safety — Vocabulary (ISO 13943:2000) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1363-1:1999, EN 1363-2:1999, EN 1366-3:2004, EN 13501-1:2007, EN 13501-2:2007, EN ISO 13943:2000 and the following apply. 3.1
bellows seal flexible seal, often based on a coated fabric sleeve, to allow movement of services 3.2
block product available in a variety of shapes and sizes. Generally cuboid for rectangular penetrations 3.3
bus bar low impedance conductor to which several electric circuits can be connected
NOTE See IEC 60439-1. SIST EN 15882-3:2009
EN 15882-3:2009 (E) 5 3.4 cable box consists of a metal frame with intumescent inlays that form a type of channel with lids 3.5
cable bundles Several cables running in the same direction and bound closely together by mechanical means 3.6 collar see pipe closure devices (3.14) 3.7
conduit metal or plastic casing designed to accomodate cables.
Normally a conduit is circular or oval in section.
See also trunking (3.26) 3.8
foam seal seal made from a material that cures at room temperature, increasing its volume upon application 3.9
metal pipes type 1 metallic pipes and conduits of reaction to fire class A1 according to EN 13501-1 with a melting or decomposition point greater than 1000°C (e.g. steel, cast iron, copper and copper alloys, nickel alloys), either insulated or non-insulated. Included in this group are the above pipes with a coating provided the overall reaction to fire class is minimum A2 3.10 metal pipes type 2 metallic pipes and conduits of reaction to fire class A1 or A2 according to EN 13501-1 with a melting or decomposition point equal to or less than 1000°C (e.g. lead, aluminium and aluminium alloys), either insulated or non-insulated 3.11 modular system system comprising a steel frame into which elastomeric blocks are installed, compressed around the service. 3.12
mortar blend of gypsum or cement based powder, fillers, water and chemical modifiers, with or without reinforcement 3.13 pillow (also referred to as bag or cushion) deformable, pillow-like bag, filled with reactive or non-reactive material, for the temporary or permanent closing of penetrations or openings. Examples of filling materials are glass and mineral wool, vermiculite, sand, organic and inorganic foams with or without intumescent or ceramising additives 3.14 pipe closure devices pre-fabricated, heat activated device that, under fire exposure, acts to crush plastic pipes or service ducts that pass through vertical or horizontal separating elements and/or fill the hollow space with an intumescent foam
NOTE Three types are considered here: collars, wraps and sleeves: Collars incorporate an outer casing which acts as a restraint for an intumescent material, enabling the collar to be either surface fixed to the separating element or incorporated within it;
SIST EN 15882-3:2009
EN 15882-3:2009 (E) 6 Wraps have no casing and hence must be located within the separating element, which acts as a restraint for the intumescent; Sleeves pass completely through the separating element and may include an outer casing. 3.15 pipe diameter nominal external diameter of the service pipe 3.16 plastic pipes pipes not classified to A1 or A2 according to EN 13501-1 (e.g. made from thermoplastic or thermosetting material) including non-homogeneous materials (e.g. glass fibre reinforced plastic pipes or layered pipes), either insulated or non-insulated, hereafter referred to as "plastic pipes". 3.17 plug as block (3.2), but cylindrical/conical in shape (for circular penetrations) 3.18
interrupted insulation pipe insulation that does not pass through the seal 3.19 sustained insulation pipe insulation that passes through the seal 3.20 putty material similar to some sealants/mastics, capable of being formed and directly installed by hand, but remaining in a plastic condition 3.21 seal depth shortest distance between the exposed and unexposed surfaces of the seal
3.22 seal thickness shortest distance between the surface of the service and the surrounding aperture
3.23 sealant/mastic, flexible single or multi-component material, comprising organic and/or inorganic fillers pre-dispersed in a binder (i.e. acrylic, polysulphide, silicone, etc) that cures or dries after application to an elastic or plasto-elastic material
3.24 service support construction mechanical support provided in the form of clips, ties, hangers, ladder racks or trays, or any device designed to carry the load of the penetrating services 3.25 sleeves see pipe closure devices (3.14) 3.26 trunking metal or plastic casing with a removable lid designed to accommodate cables.
Normally square or rectangular in section (also see conduit 3.7) SIST EN 15882-3:2009
EN 15882-3:2009 (E) 7 3.27 waveguide circular, elliptical or rectangular metal tube or pipe or a coaxial assembly of tubes/pipes through which electromagnetic waves are propagated in microwave and radio wave frequency communications 3.28 working clearances distances between services or between services and the seal edge 3.29 wrap see pipe closure devices (3.14) 4 Extended application principles 4.1 General Due to the diverse nature of materials and constructions used to seal openings in fire resistant separating elements it has been necessary to separate the extended application principles into generic seal types. Where more than one variation is to be incorporated the overall effect shall be considered.
Principles common to all generic seal types are given in 4.2. Principles and guidance relating to each specific generic seal type are given in Annex A. Annex B provides guidance on the application of test results on plastic pipe seals. Variables for each seal type, which require consideration, are included in this report. These are as follows: 1) Separating element; 2) Type of service; 3) Size of service; 4) Seal size and configuration. Each sub-clause gives the possible variation and the rule relating to the variation.
4.2 Principles common to all generic seal types The rules given in the following sub-clauses are applicable to all generic penetration seal types incorporated in Annex A, unless stated otherwise in the specific section. Table 1 – Seal material (primary generic penetration seal material as per Annex A) Variation Rules Change of material(s) comprising parts of the sealing system Not permitted unless otherwise specifically stated in Annex A
Table 2 – Separating elements — Concrete or masonry Variation Rules Decrease in thickness and/or density Increase in thickness Not permitted
Permitted except in the case of pipe closure devices where specific rules regarding the position of the seal within the separating element are outlined in the relevant section
SIST EN 15882-3:2009
EN 15882-3:2009 (E) 8
Table 3 – Separating elements – Flexible constructions Variation Rules Decrease in thickness Not permitted Increase in thickness Permitted
except in the case
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.