iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1363-2:1999

(Main)

Fire resistance tests - Part 2: Alternative and additional procedures

Fire resistance tests - Part 2: Alternative and additional procedures

This part of EN 1363 specifies alternative heating conditions and other procedures that may need to be adopted under special circumstances. This standard shall be read in conjunction with prEN 1363-1. Details of the alternative hydrocarbon, slow heating and external fire exposure heating curves and the additional impact test and measurement of radiation procedures are included within this standard.

Feuerwiderstandsprüfungen - Teil 2: Alternative und ergänzende Verfahren

Dieser Teil der EN 1363 legt alternative Beflammungsbedingungen fest und andere Verfahren, die unter bestimmten Bedingungen erforderlich werden ko(nnen. Diese Europa(ische Norm gilt in Verbindung mit prEN 1363-1. Diese Norm entha(lt Einzelheiten u(ber die drei alternativen Brandbeanspruchungskurven Kohlen- wasserstoffkurve, Schwelbrandkurve und Außenbrandkurve sowie die zusa(tliche Stoßpru(fung und die Verfahren zur Messung der Strahlung.

Essais de résistance au feu - Partie 2: Modes opératoires de substitution ou additionnels

La présente partie de l'EN 1363 prescrit les différentes conditions d' échauffement et d'autres modes opératoires susceptibles de devoir etre adoptés dans des circonstances spéciales. La présente norme doit etre lue conjointement avec le prEN 1363-1. Les détails des autres courbes concernant le feu d'hydrocarbures, l'échauffement lent et le feu externe ainsi que les modes opératoires de l'essai d'impact supplémentaire et de mesurage du rayonnement sont inclus dans la présente norme.

Preskusi požarne odpornosti – 2. del: Alternativni in dodatni postopki

General Information

Status
Published
Publication Date
30-Nov-1999
ICS
13.220.50 - Fire-resistance of building materials and elements
Technical Committee
POZ - Požarna varnost
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-1999
Due Date
01-Dec-1999
Completion Date
01-Dec-1999
Directive
89/106/EEC - Construction products
Mandate
M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
Ref Project
EN 1363-2:1999 - Fire resistance tests - Part 2: Alternative and additional procedures

Buy Standard

EN 1363-2:1999EN 1363-2:1999
PreviousNext
Standard
EN 1363-2:1999
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti – 2. del: Alternativni in dodatni postopkiFeuerwiderstandsprüfungen - Teil 2: Alternative und ergänzende VerfahrenEssais de résistance au feu - Partie 2: Modes opératoires de substitution ou additionnelsFire resistance tests - Part 2: Alternative and additional procedures13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13501-2:2023(Main)
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
EN 13501-2:2023

This document specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this document.
This document deals with:
a)   loadbearing elements without a fire separating function:
—   walls;
—   floors;
—   roofs;
—   beams;
—   columns;
—   balconies;
—   walkways;
—   stairs.
b)   loadbearing elements with a fire separating function, with or without glazing, services and fixtures:
—   walls;
—   floors;
—   roofs;
—   raised floors.
c)   products and systems for protecting elements or parts of the works:
—   ceilings with no independent fire resistance;
—   fire protective coatings, claddings and screens;
d)   non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
—   partitions;
—   facades (curtain walls) and external walls;
—   ceilings with independent fire resistance;
—   raised floors;
—   fire doors and shutters and their closing devices;
—   smoke control doors;
—   conveyor systems and their closures;
—   penetration seals;
—   linear joint seals;
—   service ducts and shafts;
—   air transfer grilles.
—   chimneys.
e)   wall and ceiling coverings with fire protection ability.
f)   lift landing doors which are tested according to EN 81 58 are excluded from this document. Lift landing doors which are tested in accordance with EN 1634 1 are classified in accordance with 7.5.5.
Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17020-5:2023(Main)
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 5: Durability of self-closing of hinged and pivoted timber doorsets
EN 17020-5:2023

This document is applicable to single and double leaf, hinged and pivoted doorsets with timber based leaves or timber framed glazed doors, covered by EN 15269-3 or EN 15269-20.
This document prescribes the methodology for extending the application of test results obtained from durability of self closing test(s) conducted in accordance with EN 1191.
Subject to the completion of the appropriate self closing test(s), the extended application can cover all or some of the following examples:
-   door leaf; pass doors;
-   glazed elements including vision panels and framed glazed doorsets;
-   side, transom and/or overpanels;
-   ventilation grilles and/or louvres;
-   wall/ceiling fixed elements (frame/suspension system);
-   glazing for door leaf, side, transom and flush over panels;
-   items of building hardware;
-   decorative finishes;
-   intumescent, smoke, draught or acoustic seals;
-   alternative supporting construction(s).

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15725:2023(Main)
Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports
EN 15725:2023

This European Standard gives the procedures for preparing reports on the extended application process using the results of reaction to fire tests, fire resistance tests and external fire exposure to roof tests undertaken for fire classification of products and product families in accordance with the various parts of EN 13501.
This standard makes reference to ‘extended application standards’ throughout; wherever this term is used it refers to either a standard prepared by CEN/TC 127 ‘Fire safety in buildings’ or the relevant product standard which includes information on extended application. In some cases, where a standard is not yet published, relevant bodies may issue recommendations for use by Notified Bodies in attestation procedures for CE marking under the Construction Products Directive (CPD), http://ec.europa.eu/enterprise/newapproach/nando/.
The European system currently permits extended application rules to be included in technical specifications. CEN Technical Committees and EOTA Working groups producing these rules are asked to seek the guidance of CEN/TC 127 to ensure that their rules comply with standards prepared by CEN/TC 127. In cases where extended application rules in harmonised EN product standards and ETAs do not comply with standards prepared by CEN/TC 127 the CEN BT shall be informed.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17020-2:2023(Main)
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters
EN 17020-2:2022

This document covers steel rolling shutters as covered by EN 15269 10 or EN 15269 20.
This document prescribes the methodology for extending the application of test results obtained from durability self-closing test(s) conducted in accordance with EN 16034.
Subject to the completion of the appropriate self-closing test or tests, the extended application could cover all or some of the following non-exhaustive list:
—   shutter curtain;
—   wall/ceiling fixed elements (frame/suspension system);
—   decorative finishes;
—   intumescent, smoke, draught or acoustic seals;
—   alternative supporting construction(s).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17020-3:2023(Main)
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets
EN 17020-3:2022

This document is applicable to the following types of steel based doorsets: horizontally sliding doorsets (single and double), telescopic doorsets (single and double) and single vertically sliding doorsets as covered by EN 15269 7 or EN 15269 20.
This document prescribes the methodology for extending the application of test results obtained from durability of self-closing test(s) conducted in accordance with EN 12605:2017+A1:2020 or EN 1191.
Subject to the completion of the appropriate self-closing test(s), the extended application can cover all or some of the following non-exhaustive list:
—   door leaf;
—   pass doors;
—   wall/ceiling fixed elements (frame/suspension system);
—   ventilation grilles and/or louvres;
—   glazing for door leaf;
—   items of building hardware;
—   decorative finishes;
—   intumescent, smoke, draught or acoustic seals;
—   alternative supporting construction(s).

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13501-6:2019+A1:2023(Main)
Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables
EN 13501-6:2018+A1:2022

This document provides the reaction to fire classification procedure for electric cables.
NOTE   For the purpose of this document, the term "electric cables" covers all power, control and communication cables, including optical fibre cables.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15269-3:2023(Main)
Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 15269-3:2022

This European Standard covers hinged or pivoted doorsets with timber based leaves, timber framed glazed doors and openable timber framed windows. It prescribes the methodology for extending the application of test results obtained from fire resistance test(s) conducted in accordance with EN 1634-1.
Subject to the completion of the appropriate test or tests, the extended application may cover all or some of the following examples:
-   integrity (E), integrity/radiation (EW) or integrity/insulation (EI1 or EI2) classification;
-   glazed elements including vision panels and framed glazed doorsets,
-   louvres and/or vents;
-   side, transom or overpanels;
-   items of building hardware;
-   decorative finishes;
-   intumescent, smoke, draught or acoustic seals;
   alternative supporting construction(s).
The effect on the Classification ‘C’ for the doorsets following an extended application process is not addressed in this European Standard.

  • Standard
    198 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    191 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17020-1:2023(Main)
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel doorsets
EN 17020-1:2022

This document covers single and double leaf, hinged and pivoted, steel based doorsets as covered by EN 15269 2 or EN 15269 20.
This document prescribes the methodology for extending the application of test results obtained from durability of self-closing test(s) conducted in accordance with EN 1191.
Subject to the completion of the appropriate self-closing test(s), the extended application can cover all or some of the following non-exhaustive list
—   door leaf;
—   side, transom and/or overpanels;
—   ventilation grilles and/or louvres;
—   wall/ceiling fixed elements (frame/suspension system);
—   glazing for door leaf, side, transom and flush over panels;
—   items of building hardware;
—   decorative finishes;
—   intumescent, smoke, draught or acoustic seals;
—   alternative supporting construction(s).

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15269-20:2020/AC:2022(Corrigendum)
Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters, operable fabric curtains and openable windows
EN 15269-20:2020/AC:2022

This document, which is intended to be read in conjunction with EN 15269 1, covers doors, shutters, openable windows and fabric curtains of any material and of the following types:
-   hinged and pivoted (e.g. metal, timber, framed glazed) doors and openable windows of single or double leaf (Table A.1);
-   horizontally and vertically moving steel sliding doors of single or double leaf with and without pass doors, including telescopic doorsets (Table A.2);
-   metal rolling shutters and operable fabric curtains (excluding overlapping systems) (Table A.3).
The following construction products are not covered by this standard:
-   unframed glass doors and openable windows;
-   sectional doors (including stacking doors);
-   vertically and horizontally folding doors;
-   horizontally and vertically moving timber sliding doors;
-   horizontally and vertically moving framed sliding doors (metal or timber).
In this document, whenever doors are mentioned, the whole range of doors, shutters, openable windows and operable fabric curtains is included or otherwise mentioned.
This document prescribes the methodology for extending the application of test results obtained from test(s) conducted in accordance with EN 1634 3.
Subject to the completion of the appropriate test or tests, the extended application can cover all or some of the following examples:
-   Ambient Temperature Smoke Control (Sa) and Medium Temperature Smoke Control (S200) classifications;
-   leaf/leaves;
-   wall/ceiling fixed elements;
-   glazed elements, louvres and/or vents;
-   side, transom or overpanels;
-   items of building hardware;
-   decorative finishes;
-   intumescent, smoke, draught or acoustic seals;
-   alternative supporting construction(s).

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-2:2022(Main)
Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
EN 15882-2:2022

This document provides guidance and rules to notified bodies (for fire dampers) allowing them to produce/validate an extended field of application report for fire dampers. This document identifies the parameters that affect the fire resistance of dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction.
This document explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This document does not cover dampers used for smoke control.
It is the intention that the application of this document makes it possible to identify which specifications to test to maximize the field of application. Some information on test programmes is given for guidance purposes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day