iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS ES 59008-6-1:2007

(Main)

Data requirements for semiconductor die -- Part 6-1: Exchange data formats and data dictionary - Data exchange - DDX file format

Data requirements for semiconductor die -- Part 6-1: Exchange data formats and data dictionary - Data exchange - DDX file format

This standard has been developed to facilitate the production,  supply and use of semiconductor die products, including but  not limited to: - wafers - singulated bare die - die and wafers  with attached connection structures - minimally or partially  encapsulated die and wafers. It specifies the data formats that  may be used for the exchange of data which is covered by  other parts of this standard as well as definitions of all  parameters used according to the principles and methods of  IEC 61360. It introduces a Device Data Exchange (DDX)  format, with the prime goal of facilitating the transfer of  adequate geometric data between die manufacturer and  CAD/CAE user and formal information models that allow data  exchange in other formats such as STEP physical file format,  in accordance with ISO 10303-21, and XML. The data format  has been kept intentionally flexible to permit usage beyond  this initial scope.

Zahtevani podatki za polprevodniška integrirana vezja - 6-1. del: Formati za izmenjavo podatkov in podatkovni slovar - Format datoteke DDX

General Information

Status
Withdrawn
Publication Date
31-Dec-2006
Withdrawal Date
27-May-2009
ICS
31.080.01 - Semiconductor devices in general
Technical Committee
I09 - Imaginarni 09
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
27-May-2009
Due Date
19-Jun-2009
Completion Date
28-May-2009
Ref Project
ES 59008-6-1:1999 - Data requirements for semiconductor die -- Part 6-1: Exchange data formats and data dictionary - Data exchange - DDX file format

Relations

Replaced By
SIST EN 62258-2:2006 - Semiconductor die products -- Part 2: Exchange data formats
Effective Date
01-May-2009

Buy Standard

TS ES 59008-6-1:2007TS ES 59008-6-1:2007
PreviousNext
Technical specification
TS ES 59008-6-1:2007
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS ES 59008-6-1:2007
01-januar-2007
Zahtevani podatki za polprevodniška integrirana vezja - 6-1. del: Formati za
izmenjavo podatkov in podatkovni slovar - Format datoteke DDX
Data requirements for semiconductor die -- Part 6-1: Exchange data formats and data
dictionary - Data exchange - DDX file format
Ta slovenski standard je istoveten z: ES 59008-6-1:1999
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST-TS ES 59008-6-1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 2 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 3 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 4 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 5 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 6 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 7 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 8 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 9 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 10 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 11 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 12 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 13 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 14 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 15 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page: 16 ----------------------

SIST-TS ES 59008-6-1:2007

---------------------- Page
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 63287-2:2023(Main)
Semiconductor devices - Guidelines for reliability qualification plans - Part 2: Concept of mission profile (IEC 63287-2:2023)
EN IEC 63287-2:2023

This part of IEC 63287 gives guidelines for the development of reliability qualification plans
using the concept of mission profile, based on the environmental conditioning and proposed
usage of the product. This document is not intended for military- and space-related applications.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63364-1:2023(Main)
Semiconductor devices - Semiconductor devices for IoT system - Part 1: Test method of sound variation detection (IEC 63364-1:2022)
EN IEC 63364-1:2023

This part of IEC 63364-1 provides terms, test method, and report of sound variation detection system based on IoT. It provides the evaluation method for each part of the sound variation detection system based on IoT in the block diagram, the characterization parameters, symbols, test setups and the conditions. In addition, this document defines the configuration items and criteria of standard space and firing situation for the quality evaluation measurement of sound field variation detection system with IoT.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60747-16-8:2023(Main)
Semiconductor devices - Part 16-8: Microwave integrated circuits - Limiters (IEC 60747-16-8:2022)
EN IEC 60747-16-8:2023

This part of IEC 60747 specifies the terminology, essential ratings and characteristics, and measuring methods of microwave integrated circuit limiters.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60747-16-7:2023(Main)
Semiconductor devices - Part 16-7: Microwave integrated circuits - Attenuators (IEC 60747-16-7:2022)
EN IEC 60747-16-7:2023

This part of IEC 60747 specifies the terminology, essential ratings and characteristics, and measuring methods of microwave integrated circuit attenuators.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61975:2010/A2:2023(Amendment)
High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010/AMD2:2022)
EN 61975:2010/A2:2022
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-37:2023(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2022)
EN IEC 60749-37:2022

This part of IEC 60749 provides a test method that is intended to evaluate and compare drop
performance of surface mount electronic components for handheld electronic product
applications in an accelerated test environment, where excessive flexure of a circuit board
causes product failure. The purpose is to standardize the test board and test methodology to
provide a reproducible assessment of the drop test performance of surface-mounted
components while producing the same failure modes normally observed during product level
test.
This document aims at prescribing a standardized test method and reporting procedure. This is
not a component qualification test and is not meant to replace any system level drop test that
is sometimes used to qualify a specific handheld electronic product. The standard is not meant
to cover the drop test required to simulate shipping and handling-related shock of electronic
components or PCB assemblies. These requirements are already addressed in test methods
such as IEC 60749-10. The method is applicable to both area array and perimeter-leaded
surface mounted packages.
This test method uses an accelerometer to measure the mechanical shock duration and
magnitude applied which is proportional to the stress on a given component mounted on a
standard board. The test method described in IEC 60749-40 uses strain gauge to measure the
strain and strain rate of a board in the vicinity of a component. The customer specification states
which test method is to be used.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62007-1:2015/A1:2023(Amendment)
Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015/AMD1:2022)
EN 62007-1:2015/A1:2022
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-10:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly (IEC 60749-10:2022)
EN IEC 60749-10:2022

This part of IEC 60749 is intended to evaluate devices in the free state and assembled to printed
wiring boards for use in electrical equipment. The method is intended to determine the
compatibility of devices and subassemblies to withstand moderately severe shocks. The use of
subassemblies is a means to test devices in usage conditions as assembled to printed wiring
boards. Mechanical shock due to suddenly applied forces, or abrupt change in motion produced
by handling, transportation or field operation can disturb operating characteristics, particularly
if the shock pulses are repetitive. This is a destructive test intended for device qualification

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-28:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - Device level (IEC 60749-28:2022)
EN IEC 60749-28:2022

This part of IEC 60749 establishes the procedure for testing, evaluating, and classifying devices and microcircuits according to their susceptibility (sensitivity) to damage or degradation by exposure to a defined field-induced charged device model (CDM) electrostatic discharge (ESD).
All packaged semiconductor devices, thin film circuits, surface acoustic wave (SAW) devices, opto-electronic devices, hybrid integrated circuits (HICs), and multi-chip modules (MCMs) containing any of these devices are to be evaluated according to this document. To perform the tests, the devices are assembled into a package similar to that expected in the final application.
This CDM document does not apply to socketed discharge model testers. This document describes the field-induced (FI) method. An alternative, the direct contact (DC) method, is described in Annex J.
The purpose of this document is to establish a test method that will replicate CDM failures and provide reliable, repeatable CDM ESD test results from tester to tester, regardless of device type. Repeatable data will allow accurate classifications and comparisons of CDM ESD sensitivity levels.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60749-39:2022(Main)
Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2021)
EN IEC 60749-39:2022

This part of IEC 60749 details the procedures for the measurement of the characteristic
properties of moisture diffusivity and water solubility in organic materials used in the
packaging of semiconductor components.
These two material properties are important parameters for the effective reliability
performance of plastic packaged semiconductors after exposure to moisture and being
subjected to high-temperature solder reflow.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day