SIST EN ISO 22005:2007
(Main)Traceability in the feed and food chain - General principles and basic requirements for system design and implementation (ISO 22005:2007)
Traceability in the feed and food chain - General principles and basic requirements for system design and implementation (ISO 22005:2007)
This International Standard gives the principles and specifies basic requirements for the design and implementation of a feed and food traceability system. It can be applied by an organization operating at any step in the feed and food chain. It is intended to be flexible enough to allow feed organizations and food organizations to achieve identified objectives. The traceability system is a technical tool to assist an organization to conform with its defined objectives and is applicable when necessary to determine the history, or location of a product or its relevant components.
Rückverfolgbarkeit in der Futter- und Lebensmittelkette - Allgemeine Grundsätze und grundlegende Anforderungen für die Gestaltung und Verwirklichung von Systemen (ISO 22005:2007)
In dieser Internationalen Norm werden Grundsätze in Bezug auf die Entwicklung und Verwirklichung eines Rückverfolg¬barkeitssystems für Futter- und Lebensmittel aufgezeigt und grundlegende Anforderungen fest¬gelegt. Sie kann von jeder Organisation angewendet werden, die auf einer beliebigen Stufe der Futter- und Lebensmittelkette tätig ist.
Sie ist als ausreichend flexibel vorgesehen, damit die mit Futter- und Lebensmitteln befassten Organisationen die ermittelten Ziele erreichen können.
Das Rückverfolgbarkeitssystem ist ein technisches Instrument, das es einer Organisation ermöglicht, vereinbarte Zielvorgaben einzuhalten, und bei Bedarf den Werdegang oder den Standort eines Produkts oder seiner relevanten Bestandteile zu bestimmen.
Traçabilité de la chaîne alimentaire - Principes généraux et exigences fondamentales s'appliquant a la conception du systeme et a sa mise en oeuvre (ISO 22005:2007)
L'ISO 22005:2007 fixe les principes et spécifie les exigences fondamentales s'appliquant à la conception et à la mise en oeuvre d'un système de traçabilité de la chaîne alimentaire. Ce système peut être appliqué par un organisme opérant à un niveau quelconque de la chaîne alimentaire.
Il est conçu pour être suffisamment flexible pour permettre aux organismes appartenant à la chaîne alimentaire d'atteindre des objectifs identifiés.
Le système de traçabilité est un outil technique destiné à aider un organisme à se conformer à ses objectifs définis, et il peut être utilisé, si nécessaire, pour déterminer l'historique ou la localisation d'un produit ou de ses composants.
Sledljivost v krmni in prehranski verigi - Splošna načela in osnovne zahteve za načrtovanje in vzpostavitev sistema (ISO 22005:2007)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22005:2007
01-oktober-2007
6OHGOMLYRVWYNUPQLLQSUHKUDQVNLYHULJL6SORãQDQDþHODLQRVQRYQH]DKWHYH]D
QDþUWRYDQMHLQY]SRVWDYLWHYVLVWHPD,62
Traceability in the feed and food chain - General principles and basic requirements for
system design and implementation (ISO 22005:2007)
Rückverfolgbarkeit in der Futter- und Lebensmittelkette - Allgemeine Grundsätze und
grundlegende Anforderungen für die Gestaltung und Verwirklichung von Systemen (ISO
22005:2007)
Traçabilité de la chaîne alimentaire - Principes généraux et exigences fondamentales
s'appliquant a la conception du systeme et a sa mise en oeuvre (ISO 22005:2007)
Ta slovenski standard je istoveten z: EN ISO 22005:2007
ICS:
67.040 Živilski proizvodi na splošno Food products in general
SIST EN ISO 22005:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 22005
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 67.040
English Version
Traceability in the feed and food chain - General principles and
basic requirements for system design and implementation (ISO
22005:2007)
Traçabilité de la chaîne alimentaire - Principes généraux et Rückverfolgbarkeit in der Futter- und Lebensmittelkette -
exigences fondamentales s'appliquant à la conception du Allgemeine Grundsätze und grundlegende Anforderungen
système et à sa mise en oeuvre (ISO 22005:2007) für die Gestaltung und Verwirklichung von Systemen (ISO
22005:2007)
This European Standard was approved by CEN on 6 July 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22005:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 22005:2007 (E)
Foreword
This document (EN ISO 22005:2007) has been prepared by Technical Committee ISO/TC 34
"Agricultural food products" in collaboration with Technical Committee CEN/SS C01 "Food
Products", the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2008, and conflicting national
standards shall be withdrawn at the latest by January 2008.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 22005:2007 has been approved by CEN as EN ISO 22005:2007 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 22005
First edition
2007-07-15
Traceability in the feed and food chain —
General principles and basic
requirements for system design and
implementation
Traçabilité de la chaîne alimentaire — Principes généraux et exigences
fondamentales s'appliquant à la conception du système et à sa mise en
oeuvre
Reference number
ISO 22005:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 22005:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 22005:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22005 was prepared by Technical Committee ISO/TC 34, Food products.
© ISO 2007 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO 22005:2007(E)
Introduction
A traceability system is a useful tool to assist an organization operating within a feed and food chain to
achieve defined objectives in a management system.
The choice of a traceability system is influenced by regulations, product characteristics and customer
expectations.
The complexity of the traceability system can vary depending on the features of the product and the objectives
to be achieved.
The implementation by an organization of a traceability system depends on
⎯ technical limits inherent to the organization and products (i.e. nature of the raw materials, size of the lots,
collection and transport procedures, processing and packaging methods), and
⎯ the cost benefits of applying such a system.
A traceability system on its own is insufficient to achieve food safety.
iv © ISO 2007 – All rights reserved
---------------------- Page: 7 ----------------------
INTERNATIONAL STANDARD ISO 22005:2007(E)
Traceability in the feed and food chain — General principles
and basic requirements for system design and implementation
1 Scope
This International Standard gives the principles and specifies basic requirements for the design and
implementation of a feed and food traceability system. It can be applied by an organization operating at any
step in the feed and food chain.
It is intended to be flexible enough to allow feed organizations and food organizations to achieve identified
objectives.
The traceability system is a technical tool to assist an organization to conform with its defined objectives and
is applicable when necessary to determine the history, or location of a product or its relevant components.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 22000:2005, Food safety management systems — Requirements for any organization in the food chain
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 22000 and the following apply.
3.1
product
result of a process
[ISO 9000:2005, definition 3.4.2]
NOTE Product may include packaging material.
3.2
process
set of interrelated or interacting activities which transforms inputs into outputs
NOTE 1 Inputs to a process are generally outputs of other processes.
NOTE 2 Processes in an organization (3.10) are generally planned and carried out under controlled conditions to add
value.
NOTE 3 A process where the conformity of other resulting product (3.1) cannot be readily or economically verified is
frequently referred to as a “special process”.
[ISO 9000:2005, definition 3.4.1]
© ISO 2007 – All rights reserved 1
---------------------- Page: 8 ----------------------
ISO 22005:2007(E)
3.3
lot
set of units of a product which have been produced and/or processed or packaged under similar
circumstances
NOTE 1 The lot is determined by parameters established beforehand by the organization.
NOTE 2 A set of units may be reduced to a single unit of product.
3.4
lot identification
process of assigning a unique code to a lot
3.5
location
place of production, processing, distribution, storage and handling from primary production to consumption
3.6
traceability
ability to follow the movement of a feed or food through specified stage(s) of production, processing and
distribution
NOTE 1 Adapted from Reference [3].
NOTE 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.