SIST-TP CEN/TR 17559:2022
(Main)Algae and algae products - Food and feed applications: General overview of limits, procedures and analytical methods
Algae and algae products - Food and feed applications: General overview of limits, procedures and analytical methods
This document describes product specifications, product characteristics and other relevant information for algae and algae products for food, nutraceutical and animal feed applications. This document is a general overview of available limits, procedures and analytical methods applicable to algae and algae products used for food and feed applications.
This document does not apply to pharmaceutical, cosmetics, fertilizer/biostimulants, chemical and biofuel applications.
Algen und Algenprodukte - Nahrungs- und Futtermittelanwendungen: Überblick über Grenzwerte, Verfahren und Analysemethoden
Algues et produits d’algues - Applications de denrées alimentaires et d’aliments pour animaux - Vue d’ensemble des limites, modes opératoires et méthodes d’analyse
Le présent document décrit les spécifications des produits, les caractéristiques des produits et les autres informations pertinentes concernant les algues et produits d’algues pour les applications alimentaires, nutraceutiques et aliments pour animaux. Le présent document est une présentation générale des limites, modes opératoires et méthodes d’analyse disponibles applicables aux algues et produits d’algues utilisés pour les denrées alimentaires et aliments pour animaux.
Le présent document ne s’applique pas aux produits pharmaceutiques, cosmétiques, engrais/biostimulants, produits chimiques et biocarburants.
Alge in izdelki iz alg - Uporaba hrane in krme: Splošni pregled omejitev, postopkov in analitskih metod
V tem dokumentu so opisane specifikacije izdelkov, značilnosti izdelkov in druge pomembne informacije za alge in izdelke iz alg, ki se uporabljajo za prehrambene namene, kot farmacevtski dodatki prehrani in krma za živali. Ta dokument vsebuje splošen pregled razpoložljivih mejnih vrednosti, postopkov in analiznih metod, ki se uporabljajo za alge in izdelke iz alg, namenjene za prehrano in krmo.
Področje uporabe tega dokumenta ne zajema farmacevtskih izdelkov, kozmetike, gnojil/biostimulantov, kemikalij in biogoriv.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 17559:2022
01-september-2022
Nadomešča:
SIST-TP CEN/TR 17559:2021
Alge in izdelki iz alg - Uporaba hrane in krme: Splošni pregled omejitev, postopkov
in analitskih metod
Algae and algae products - Food and feed applications: General overview of limits,
procedures and analytical methods
Algen und Algenprodukte - Nahrungs- und Futtermittelanwendungen: Überblick über
Grenzwerte, Verfahren und Analysemethoden
Algues et produits d’algues - Applications de denrées alimentaires et d’aliments pour
animaux - Vue d’ensemble des limites, modes opératoires et méthodes d’analyse
Ta slovenski standard je istoveten z: CEN/TR 17559:2022
ICS:
65.120 Krmila Animal feeding stuffs
67.040 Živilski proizvodi na splošno Food products in general
SIST-TP CEN/TR 17559:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 17559:2022
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559
TECHNICAL REPORT
RAPPORT TECHNIQUE
August 2022
TECHNISCHER REPORT
ICS 65.120; 67.040; 13.020.55 Supersedes CEN/TR 17559:2021
English Version
Algae and algae products - Food and feed applications:
General overview of limits, procedures and analytical
methods
Algues et produits d'algues - Applications de denrées Algen und Algenprodukte - Nahrungs- und
alimentaires et d'aliments pour animaux - Vue Futtermittelanwendungen: Überblick über Grenzwerte,
d'ensemble des limites, modes opératoires et Verfahren und Analysemethoden
méthodes d'analyse
This Technical Report was approved by CEN on 3 July 2022. It has been drawn up by the Technical Committee CEN/TC 454.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17559:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Product specifications . 7
4.1 General . 7
4.2 Food . 8
4.3 Feed . 8
4.4 Type of product specification documents . 9
4.4.1 General . 9
4.4.2 Technical Data Sheet (TDS) . 9
4.4.3 Certificate of Analysis (CoA) . 9
4.4.4 Product data sheet (PDS) . 9
4.4.5 Raw Material Specification (RMS). 9
4.4.6 Material Safety Data Sheet (MSDS) . 9
5 Product characteristics . 9
5.1 Purity . 9
5.1.1 General . 9
5.1.2 Physical foreign matter . 10
5.1.3 Other algae, bacteria or organic materials . 10
5.1.4 Algae from other location . 11
5.1.5 Methods of analysis . 11
5.2 Contamination. 12
5.2.1 General . 12
5.2.2 Food . 12
5.2.3 Feed . 13
5.2.4 Common issues in food and feed for other contaminants . 13
6 Other relevant product information . 14
6.1 Origin . 14
6.1.1 General . 14
6.1.2 Country of origin and place of provenance . 15
6.2 Labelling . 15
6.3 Verification and claims . 15
6.4 Traceability . 16
6.5 Chain of Custody . 16
6.6 Sustainable development . 16
6.6.1 General . 16
6.6.2 The United Nations Sustainable Development Goals . 16
7 Algae and algae products as Novel Food . 17
7.1 Procedure . 17
7.2 Methods of analysis . 17
Annex A (informative) Examples of product specification documents . 18
Annex B (informative) Purity identification methods and gap analysis algae . 23
2
---------------------- Page: 4 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
Annex C (informative) Mapping of currently existing legislation on maximum allowed levels
of elements and other chemical contaminants in food and feed applications . 26
Annex D (informative) Applicability of standards to determine the safety of novel algae and
algae food products to comply with the Novel Food Regulation (EU) No 2015/2283 . 29
Bibliography . 38
3
---------------------- Page: 5 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
European foreword
This document (CEN/TR 17559:2022) has been prepared by Technical Committee CEN/TC 454 “Algae
and algae products”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TR 17559:2021.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
4
---------------------- Page: 6 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
Introduction
This document has been prepared by the experts of CEN/TC 454 ‘Algae and algae products’.
The European Committee for Standardization (CEN) was requested by the European Commission (EC) to
draft European standards or European standardization deliverables to support the implementation of
Article 3 of Directive 2009/28/EC for algae and algae-based products or intermediates.
1
This request, presented as Mandate M/547 , also contributes to the Communication on “Innovating for
Sustainable Growth: A Bio economy for Europe”.
The former working group CEN Technical Board Working Group 218 “Algae”, was created in 2016 to
develop a work programme as part of this Mandate. The technical committee CEN/TC 454 'Algae and
algae products' was established to carry out the work programme that will prepare a series of standards.
The interest in algae and algae-based products or intermediates has increased significantly in Europe as
a valuable source including but not limited to, carbohydrates, proteins, lipids, and several pigments.
These materials are suitable for use in a wide range of applications from food and feed purposes to other
sectors, such as textile, cosmetics, biopolymers, biofuel and fertilizer/biostimulants. Standardization was
identified as having an important role in order to promote the use of algae and algae products.
The work of CEN/TC 454 should improve the reliability of the supply chain, thereby improving the
confidence of industry and consumers in algae, which include macroalgae, microalgae, cyanobacteria,
Labyrinthulomycetes, algae-based products or intermediates and will promote and support
commercialisation of the European algae industry.
This document has been prepared in close collaboration with the CEN/TC 454 working groups. The
European standards and technical reports developed in this mandate include:
CEN/TC 454/WG 1 Terminology
— CEN/TR 17559, Algae and algae products - Food and feed applications: General overview of limits,
procedures and analytical methods
CEN/TC 454/WG 2 Identification
— EN 17477, Algae and algae products - Identification of the biomass of microalgae, macroalgae,
cyanobacteria and Labyrinthulomycetes - Detection and identification with morphological and/or
molecular methods
CEN/TC 454/WG 3 Productivity
— EN 17480, Algae and algae products - Methods for the determination of productivity of algae growth
sites
CEN/TC 454/WG 5 Specifications for non-food/feed sector applications
— CEN/TR 17611, Algae and algae products - Specifications for cosmetic sector applications
— CEN/TR 17739, Algae and algae products - Specifications for chemical and biofuels sector
applications
— CEN/TR 17612, Algae and algae products - Specifications for pharmaceutical sector applications
1
http://ec.europa.eu/growth/tools-databases/mandates/index.cfm?fuseaction=refSearch.search
5
---------------------- Page: 7 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
CEN/TC 454/WG 6 Product test methods
— In preparation: Algae and algae products - Methods of sampling and analysis - Determination of total
lipids using the Ryckebosch-Foubert method
— EN 17605, Algae, algae products and intermediates - Methods of sampling and analysis - Sample
treatment
— In preparation: Algae and algae products – Methods of sampling and analysis – Quantification of
chlorophyll
The available EU directives and other ISO and CEN standards which are of relevance for algae and algae
products for food and feed applications are listed in the bibliography.
6
---------------------- Page: 8 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
1 Scope
This document describes product specifications, product characteristics and other relevant information
for algae and algae products for food, nutraceutical and animal feed applications. This document is a
general overview of available limits, procedures and analytical methods applicable to algae and algae
products used for food and feed applications.
This document does not apply to pharmaceutical, cosmetics, fertilizer/biostimulants, chemical and
biofuel applications.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 17399, Algae and algae products - Terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 17399 and the following apply:
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
algae and algae products
functional group of organisms consisting of microalgae, macroalgae, cyanobacteria, Labyrinthulomycetes
and products derived thereof
Note 1 to entry: examples of products are biomass, extracts or derivatives from algae, including a.o. algal oil and
algal powder.
4 Product specifications
4.1 General
The interest in algae and algae products has increased significantly in Europe as a source of
carbohydrates, proteins, lipids, minerals, several pigments etc. These materials are suitable for use in a
wide range of applications for food and feed purposes and to other sectors, such as textile, cosmetics,
biopolymers, biofuel and fertilizers and biostimulants.
Depending on the application different information on product characteristics (Clause 5) are required as
product specification by the applicable regulation.
7
---------------------- Page: 9 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
4.2 Food
All algae and algae products intended for food or food ingredients are accompanied by basic information
on the product in line with applicable EU regulation for food labelling as well as specific directives from
some EU countries. Some are mandatory and other optional and are dependent on the target market.
These product specifications for food contain information that includes but is not limited to [27]:
— energy;
— content of fat, saturates, carbohydrate, sugars, protein, and salt (sodium);
— other nutrients (e.g. vitamins, minerals, fibre, polyols) [31];
— total sulphites;
— moisture;
— ingredients and presence of allergens;
— shelf-life, including requirements for storage and shipping;
— contaminants as defined as critical in the risk assessment of the food safety management system (e.g.
heavy metals).
4.3 Feed
All algae and algae products intended for feed or feed ingredients are be accompanied by basic
information on the product. These product specification for feed contain information, where applicable,
that includes but is not limited to [45]:
— type of feed and intended use;
— energy;
— crude protein;
— crude oils and fats;
— crude fibre;
— crude ash;
— amino acids (lysine and methionine);
— minerals (calcium, sodium, phosphorus, magnesium);
— moisture;
— feed additives;
— minimum storage life;
— contaminants as defined as critical in the risk assessment of the feed safety management system (e.g.
heavy metals).
8
---------------------- Page: 10 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
4.4 Type of product specification documents
4.4.1 General
Different product specification documents with information on algae and algae products should be used
by organisations. These documents are not mandatory and are used for information exchange.
4.4.2 Technical Data Sheet (TDS)
The technical data sheet is a technical document containing the technical parameters adopted to
characterize the product and therefore being the equivalent of the Certificate of Analysis (4.4.3). The TDS
includes the typical ranges of different parameters used to define the product characteristics or
applicable regulatory limits. Examples of a TDS for some algae are attached as Annex A.
4.4.3 Certificate of Analysis (CoA)
The certificate of analysis is a document issued by the organization based on actual laboratory results to
report test results of the sample. It includes references to the analytical method and quality standard(s)
used. It may or may not have legal value.
4.4.4 Product data sheet (PDS)
The product data sheet is a document issued by the manufacturer for marketing purposes and usually
used to provide product approval information to the customer.
4.4.5 Raw Material Specification (RMS)
The raw material specification is a technical document about the product, usually prepared by
manufacturer, directed to provide all product approval information to the customer and usually attached
to a commercial contract.
4.4.6 Material Safety Data Sheet (MSDS)
The material safety data sheet is a document issued according to EC Regulation [37] with the aim of
providing product compliance information in respect of human health and safety at the workplace and
protection of the environment.
This document is issued by the manufacturer for hazardous substances and mixtures and is not required
for all materials or products. In general, an MSDS is not necessary for food and feed applications.
NOTE Some customers ask for an MSDS even if it is not mandatory. It is the algae and algae product
manufacturer's responsibility to check the applicable regulation case by case. Algae and algae products can or can
possibly not fall under the MSDS obligation.
5 Product characteristics
5.1 Purity
5.1.1 General
The product purity is defined as the percentage of a specific component in the total amount of a product.
Any other substances are specified in the technical data sheet.
Purity is affected by the accidental presence or the fraudulent addition of any organism, part or product
of an organism, other than named in the product specification and description of the concerned algae; or
any extraneous substances with the same composition as dry algae, even in the absence of contamination.
The minimum purity required for a food product will depend on the application of the algae or algae
product and is agreed with the customer. The minimum requirement of purity for feed is regulated by
9
---------------------- Page: 11 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
legislation and customer contracts. Purity is not related to contamination since contamination will not
affect the amount of required substance.
The following substances affecting the purity of a product can be addressed [47]:
1) Physical foreign matter (i.e. (micro) plastic fragments, wires from fishing nets and ropes, feathers
from birds, shells, etc.);
2) Other algae (including toxin‐producing cyanobacteria), bacteria or organic materials (e.g. grass,
proteins or oils from other species);
3) Algae from other origin or location than stated (e.g. from Asia instead of Europe).
NOTE 1 The percentage is specified by mass fraction (kg/kg), volume fraction (m3/m3) or cell fraction (cell
counts/all cell counts) or their corresponding concentrations if more appropriate.
NOTE 2 Foreign matter related to the use of genetically modified species or non-organic produced products are
regulated by EU Regulation.
Methods of analysis to determine the purity of algae and algae products include qualitative and
quantitative methods. If a qualitative method shows substances that affect the product purity, a
quantitative method may be necessary. Various methods are suitable for fresh materials and dry
materials or powders.
Available methods include visual inspection, microscopy, nucleic acids identification (DNA barcoding,
PCR techniques, DNA microarrays, NGS, Q-PCR), molecular and chemical fingerprinting (fatty acid profile,
pigment analysis) and isotopic analysis.
5.1.2 Physical foreign matter
Macroscopic examination is suitable for determining the presence of particles of foreign matter in whole
or cut (macro)algae. Foreign matter are all materials which are not part of the (macro)algal biomass.
Additional aids (like UV-light, sieving, centrifugation) might be helpful to find the foreign matter.
Microscopy is a suitable tool for microalgae, cyanobacteria, Labyrinthulomycetes and powdered
materials and small particles of physical foreign matter for which macroscopic examination is not
suitable. Reduction of particle size or powdering materials can hide the presence of foreign matter and
make it more difficult to detect. Also diluted samples cannot be qualified and need a quantification step.
5.1.3 Other algae, bacteria or organic materials
Visual inspection is suitable for freshly harvested macroalgae as the intact cells can be recognized as a
whole. When the holdfast is removed or when epiphytic organisms may be present on the surface and
visual inspection may or may not be sufficient to identify the species after harvesting. Macroalgae need
to be crushed and mixed and the mixture needs to be plated to identify which colonies are present in the
sample. For ground algae, cells are disrupted and the algae species can no longer be recognized nor be
quantified. Rehydration might help here. Specifically, for cyanobacteria, some guidance for the
numeration of phytoplankton can provide the degree of purity on fresh samples [1].
Macroscopical and microscopical characterization includes features, which distinguish the algae material
from potential non-specified substances. Identification tests need to be specifically validated for algae
and are usually a combination of methods depending on the algae species. Identification tests include
macroscopical characters, microscopical characters, chromatographic procedures and physicochemical
analysis. Automated tools might help like cell counters or cell flow cytometers.
The development of methods based on nucleic acids characteristics (microsatellites, NGS, barcoding,
RAPD, AFLP, etc.) to be sequenced and/or quantified (qPCR) from product samples would provide simple
and fast tools for the identification of multiple targeted species and would help to indicate the presence
10
---------------------- Page: 12 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
of other nucleic acids than those of the algal material. Other horizontal analytical methods useful for
purity detection (molecular or chemical fingerprinting like fatty acid analysis, etc) will be developed in
CEN/TC 460 'Food and feed authenticity’. Currently, there is a lack of databases for the identification of
foreign matter.
5.1.4 Algae from other location
The most promising test to detect the presence of algae from other regions then stated, is the use of stable
isotopes. However, first databases with the characterization of isotopes from different regions needs to
be established [47]. Another method is the use of lipidomics tools, although these tools also require the
establishment of databases [60].
Currently these methods are not yet standardized and available for routine testing. In addition, essential
databases are not complete to identify all different species. Therefore, good farming practices (GFP), good
manufacturing practices (GMP), traceability and Chain of Custody systems are essential to monitor the
purity for algae and algae products.
An overview of the currently available types of foreign matter and respective detection methods
including qualitative and quantitative determination are shown in Annex B, Table B.1 [47]. The reliability
of these different methods depends on the complexity of the species and foreign matter and are not
necessarily sufficient for each case.
5.1.5 Methods of analysis
The inventory of available methods and recommendation for prioritizing future method development on
purity of algae and algae products are listed in Annex B, Table B.2.
Specific gaps to use these methods are lack of respectively [47]:
— sampling strategies for visual inspection and microscopy;
— quantification method for microscopy;
— databases, algae selective primers and protocols for nucleic acids identification; and
— databases for molecular and chemical fingerprinting and isotope analysis (see Annex B, Table B.3).
In addition to the gap per analysis methodology, methods are lacking for the quantification of the found
foreign matter. Furthermore, protocols describing what to do with the product if the presence of a foreign
matter is detected, are lacking.
It is recommended to further develop and standardize the following protocols [47]:
— sample strategies for quality control of fresh materials and of dry/powdered materials;
— quality control protocols describing which other checks have to be done when foreign matter is
found;
— visual inspection protocols for fresh materials and for dry/powdered materials;
— microscopical inspection protocols for fresh materials and for dry/powdered materials;
— protocol for molecular biological quality control taking into account the most important criteria;
— study the applicability of isotope analysis for specification of the region of origin.
11
---------------------- Page: 13 ----------------------
SIST-TP CEN/TR 17559:2022
CEN/TR 17559:2022 (E)
5.2 Contamination
5.2.1 General
A contaminant is defined as any biological or chemical agent, foreign matter, or other substances not
intentionally added to food which may compromise food safety or suitability of algae and algae products
in the food or feed application [44]. Several types of contaminants exist including chemical,
microbiological and physical contamination. Chemical contamination of algae and algae products can
occur in the open waters (macroalgae) or in a closed or semi-closed cultivation system (micro- and
macroalgae), e.g. when water sources for algae cultivation have been in contact with human or industrial
activities or outlets. Most algae tend to accumulate minerals and other compounds if present in the
surrounding environment. Therefore, this form of contamination is important to monitor. Processes to
reduce contaminants to acceptable levels are available, like rinsing.
5.2.2 Food
The contaminants for algae that have been identified as potential hazards for food safety include: heavy
metals (including uranium), toxins, pesticides, dioxins, PAH’s, allergens, pheophorbides and
microorganisms. The potential presence of these hazards depends on the algae species and its cultivation
and processing conditions.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.