SIST EN ISO 9455-10:2013
(Main)Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012)
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012)
This part of ISO 9455 specifies a method for the determination of the efficacy of a soft soldering flux. The method is known as the solder spread method of filler metal and is applicable to all flux classes defined in ISO 9454-1.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 10: Bestimmung der Wirksamkeit des Flussmittels; Ausbreitungsprüfung (ISO 9455-10:2012)
Dieser Teil der ISO 9455 legt ein Verfahren fest, um die Wirksamkeit eines Flussmittels für Weichlöten zu
bestimmen. Das Verfahren wird als Ausbreitungsprüfung bezeichnet. Das Verfahren ist anwendbar auf alle
Flussmittelklassen nach ISO 9454-1.
ANMERKUNG Ein alternatives Verfahren für die Bestimmung der Wirksamkeit von Flussmitteln, das
ausschließlich auf flüssige Flussmittel anwendbar ist, ist die Benetzungsprüfung, die in ISO 9455-16 festgelegt ist.
Flux de brasage tendre - Méthodes d'essai - Partie 10: Essai d'efficacité du flux, méthode d'étalement (ISO 9455-10:2012)
La présente partie de l'ISO 9455 spécifie une méthode pour la détermination de l'efficacité d'un flux de brasage tendre. Cette méthode est connue sous le nom de méthode d'étalement du métal d'apport et est applicable à toutes les classes de flux définies dans l'ISO 9454-1.
NOTE Une autre méthode de détermination de l'efficacité du flux, applicable seulement aux flux liquides, connue sous le nom de méthode à la balance de mouillage, est spécifiée dans l'ISO 9455-16[3].
Talila za mehko spajkanje - Preskusne metode - 10. del: Preskus učinkovitosti talila, metoda razlivanja spajke (ISO 9455-10:2012)
Ta del standarda ISO 9455 določa metodo za ugotavljanje učinkovitosti talila za mehko spajkanje. Imenuje se metoda razlivanja spajke dodajnega materiala in se uporablja za vse razrede talil, opredeljenih v standardu ISO 9454-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-10:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 9455-10:2001
7DOLOD]DPHKNRVSDMNDQMH3UHVNXVQHPHWRGHGHO 3UHVNXVXþLQNRYLWRVWL
WDOLODPHWRGDUD]OLYDQMDVSDMNH ,62
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method
(ISO 9455-10:2012)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 10: Bestimmung der Wirksamkeit des
Flussmittels; Ausbreitungsprüfung (ISO 9455-10:2012)
Flux de brasage tendre - Méthodes d'essai - Partie 10: Essai d'efficacité du flux,
méthode d'étalement (ISO 9455-10:2012)
Ta slovenski standard je istoveten z: EN ISO 9455-10:2012
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-10:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-10:2013
EUROPEAN STANDARD
EN ISO 9455-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2012
ICS 25.160.50 Supersedes EN ISO 9455-10:2000
English Version
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test,
solder spread method (ISO 9455-10:2012)
Flux de brasage tendre - Méthodes d'essai - Partie 10: Flussmittel zum Weichlöten - Prüfverfahren - Teil 10:
Essai d'efficacité du flux, méthode d'étalement (ISO 9455- Bestimmung der Wirksamkeit des Flussmittels,
10:2012) Ausbreitungsprüfung (ISO 9455-10:2012)
This European Standard was approved by CEN on 14 September 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-10:2012: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-10:2013
EN ISO 9455-10:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-10:2013
EN ISO 9455-10:2012 (E)
Foreword
This document (EN ISO 9455-10:2012) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2013, and conflicting national standards shall be withdrawn at
the latest by March 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-10:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-10:2012 has been approved by CEN as a EN ISO 9455-10:2012 without any
modification.
3
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-10:2013
---------------------- Page: 5 ----------------------
SIST EN ISO 9455-10:2013
INTERNATIONAL ISO
STANDARD 9455-10
Second edition
2012-09-15
Soft soldering fluxes — Test methods —
Part 10:
Flux efficacy test, solder spread method
Flux de brasage tendre — Méthodes d’essai —
Partie 10: Essai d’efficacité du flux, méthode d’étalement
Reference number
ISO 9455-10:2012(E)
©
ISO 2012
---------------------- Page: 6 ----------------------
SIST EN ISO 9455-10:2013
ISO 9455-10:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 7 ----------------------
SIST EN ISO 9455-10:2013
ISO 9455-10:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Symbols . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus and materials . 2
7 Test specimens . 3
7.1 Brass test plates . 3
7.2 Solder sample . 3
8 Procedure . 3
8.1 Preparation of test plates . 3
8.2 Test method . 3
8.3 Replicate tests . 4
9 Expression of results . 4
10 Precision . 4
11 Test report . 5
Annex A (informative) Method for the preparation of standard reference rosin (colophony) based liquid
fluxes, having 25 % by mass non-volatile content . 6
Annex B (informative) Chemical composition of brass test plates . 8
Bibliography . 9
© ISO 2012 – All rights reserved iii
---------------------- Page: 8 ----------------------
SIST EN ISO 9455-10:2013
ISO 9455-10:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9455-10 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 12, Soldering materials.
ISO 9455 consists of the following parts, under the general title Soft soldering fluxes — Test methods:
— Part 1: Determination of non-volatile matter, gravimetric method
— Part 2: Determination of non-volatile matter, ebulliometric method
— Part 3: Determination of acid value, potentiometric and visual titration methods
— Part 5: Copper mirror test
— Part 6: Determination and detection of halide (excluding fluoride) content
— Part 8: Determination of zinc content
— Part 9: Determination of ammonia content
— Part 10: Flux efficacy test, solder spread method
— Part 11: Solubility of flux residues
— Part 13: Determination of flux spattering
— Part 14: Assessment of tackiness of flux residues
— Part 15: Copper corrosion test
— Part 16: Flux efficacy tests, wetting balance method
— Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues
Requests for official interpretations of any aspect of this part of ISO 9455 should be directed to the Secretariat of
ISO/TC 44/SC 12 via your national standards body. A complete listing of these bodies can be found at www.iso.org.
iv © ISO 2012 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 9455-10:2013
INTERNATIONAL STANDARD ISO 9455-10:2012(E)
Soft soldering fluxes — Test methods —
Part 10:
Flux efficacy test, solder spread method
1 Scope
This part of ISO 9455 specifies a method for the determination of the efficacy of a soft soldering flux. The method
is known as the solder spread method of filler metal and is applicable to all flux classes defined in ISO 9454-1.
NOTE An alternative method for the determination of the flux efficacy, applicable to liquid fluxes only, known as the
[3]
wetting balance method, is specified in ISO 9455-16.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 9453, Soft solder alloys — Chemical compositions and forms
ISO 9454-1:1990, Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling
and packaging
3 Symbols
arithmetic mean spread area, in square millimetres
A
H
height of spread solder, in millimetres
1/3
D
diameter, in millimetres, when the solder used is considered as a sphere, D = 1,24 × V
R reproducibility
r repeatability
s standard deviation within laboratory
w
s standard deviation between l
...
SLOVENSKI STANDARD
oSIST prEN ISO 9455-10:2011
01-junij-2011
7DOLOD]DPHKNRVSDMNDQMH3UHVNXVQHPHWRGHGHO 3UHVNXVXþLQNRYLWRVWL
WDOLODPHWRGDUD]OLYDQMDVSDMNH ,62',6
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method
(ISO/DIS 9455-10:2011)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 10: Bestimmung der Wirksamkeit des
Flussmittels; Ausbreitungsprüfung (ISO/DIS 9455-10:2011)
Flux de brasage tendre - Méthodes d'essai - Partie 10: Essai d'efficacité du flux,
méthode d'étalement (ISO/DIS 9455-10:2011)
Ta slovenski standard je istoveten z: prEN ISO 9455-10
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
oSIST prEN ISO 9455-10:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 9455-10:2011
---------------------- Page: 2 ----------------------
oSIST prEN ISO 9455-10:2011
EUROPEAN STANDARD
DRAFT
prEN ISO 9455-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2011
ICS 25.160.50 Will supersede EN ISO 9455-10:2000
English Version
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test,
solder spread method (ISO/DIS 9455-10:2011)
Flux de brasage tendre - Méthodes d'essai - Partie 10: Flussmittel zum Weichlöten - Prüfverfahren - Teil 10:
Essai d'efficacité du flux, méthode d'étalement (ISO/DIS Bestimmung der Wirksamkeit des Flussmittels;
9455-10:2011) Ausbreitungsprüfung (ISO/DIS 9455-10:2011)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 9455-10:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN ISO 9455-10:2011
prEN ISO 9455-10:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
oSIST prEN ISO 9455-10:2011
prEN ISO 9455-10:2011 (E)
Foreword
This document (prEN ISO 9455-10:2011) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of
which is held by DIN.
This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 9455-10:2000.
Endorsement notice
The text of ISO/DIS 9455-10:2011 has been approved by CEN as a prEN ISO 9455-10:2011 without any
modification.
3
---------------------- Page: 5 ----------------------
oSIST prEN ISO 9455-10:2011
---------------------- Page: 6 ----------------------
oSIST prEN ISO 9455-10:2011
DRAFT INTERNATIONAL STANDARD ISO/DIS 9455-10
ISO/TC 44/SC 12 Secretariat: DIN
Voting begins on Voting terminates on
2011-04-21 2011-09-21
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Soft soldering fluxes — Test methods —
Part 10:
Flux efficacy test, solder spread method
Flux de brasage tendre — Méthodes d'essai —
Partie 10: Essai d'efficacité du flux, méthode d'étalement
[Revision of first edition (ISO 9455-10:1998)]
ICS 25.160.50
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2011
---------------------- Page: 7 ----------------------
oSIST prEN ISO 9455-10:2011
ISO/DIS 9455-10
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
oSIST prEN ISO 9455-10:2011
ISO/DIS 9455-10
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Symbols and abbreviated terms .1
4 Principles.2
5 Reagents.2
6 Apparatus.2
7 Test specimens.3
7.1 Brass test plates.3
7.2 Solder sample.3
8 Procedure.3
8.1 Preparation of test plates .3
8.2 Test method.4
8.3 Replicate tests.4
9 Expression of results.4
10 Precision.4
11 Test report.6
Annex A (informative) Method for the preparation of standard reference rosin (colophony) based
liquid fluxes, having 25 % (m/m) non-volatile content .7
A.1 General.7
A.2 Principle.7
A.3 Apparatus.7
A.4 Reagents.7
A.4.1 Rosin (colophony) .7
A.4.2 Diethylamine hydrochloride.7
A.4.3 Propan-2-ol.8
A.5 Procedure.8
A.5.1 Nonactivated rosin (colophony) .8
A.5.2 Halogen activated rosin (colophony) .8
A.6 Storage.8
Annex B (informative) Chemical composition of brass test plates .9
Bibliography.10
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
oSIST prEN ISO 9455-10:2011
ISO/DIS 9455-10
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9455-10 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 12, Soldering materials.
This second/third/. edition cancels and replaces the first/second/. edition (ISO 9455-10:1998), [clause(s) /
subclause(s) / table(s) / figure(s) / annex(es)] of which [has / have] been technically revised.
ISO 9455 consists of the following parts, under the general title Soft soldering fluxes — Test methods:
⎯ Part 10: Flux efficacy test, solder spread method
⎯ Part [n]:
⎯ Part [n+1]:
⎯ Part 10: Flux efficacy test, solder spread method
⎯ Part [n]:
⎯ Part [n+1]:
iv © ISO 2011 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 9455-10:2011
ISO/DIS 9455-10
Introduction
Requests for official interpretations of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 12 via your national standards body. A complete listing of these bodies can be
found at www.iso.org.
© ISO 2011 – All rights reserved v
---------------------- Page: 11 ----------------------
o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.