Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-6: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Kalibrierung von Antennen für EMV-Messungen

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-6: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Étalonnage des antennes CEM

Specifikacija za merilne naprave in metode za merjenje radijskih motenj in odpornosti - 1-6. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Umerjanje EMC antene - Dopolnilo A1

General Information

Status
Published
Publication Date
08-Jun-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-May-2017
Due Date
05-Aug-2017
Completion Date
09-Jun-2017

RELATIONS

Buy Standard

Amendment
SIST EN 55016-1-6:2015/A1:2017 - BARVe na PDF-str 8,9,10,12
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 55016-1-6:2015/A1:2017
01-julij-2017
Specifikacija za merilne naprave in metode za merjenje radijskih motenj in

odpornosti - 1-6. del: Merilne naprave za merjenje radijskih motenj in odpornosti -

Umerjanje EMC antene - Dopolnilo A1

Specification for radio disturbance and immunity measuring apparatus and methods -

Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna
calibration
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur

Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil

1-6: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Kalibrierung von Antennen für EMV-Messungen
Spécifications des méthodes et des appareils de mesure des perturbations

radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-6:

Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Étalonnage des antennes CEM
Ta slovenski standard je istoveten z: EN 55016-1-6:2015/A1:2017
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
SIST EN 55016-1-6:2015/A1:2017 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 55016-1-6:2015/A1:2017
---------------------- Page: 2 ----------------------
SIST EN 55016-1-6:2015/A1:2017
EUROPEAN STANDARD EN 55016-1-6:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 33.100.10; 33.100.20
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1-6: Radio disturbance and
immunity measuring apparatus - EMC antenna calibration
(CISPR 16-1-6:2014/A1:2017)

Spécifications des méthodes et des appareils de mesure Anforderungen an Geräte und Einrichtungen sowie

des perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten

perturbations radioélectriques - Partie 1-6: Appareils de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-6:

mesure des perturbations radioélectriques et de l'immunité Geräte und Einrichtungen zur Messung der hochfrequenten

aux perturbations radioélectriques - Étalonnage des Störaussendung (Funkstörungen) und Störfestigkeit -

antennes CEM Kalibrierung von Antennen für EMV-Messungen
(CISPR 16-1-6:2014/A1:2017) (CISPR 16-1-6:2014/A1:2017)

This amendment A1 modifies the European Standard EN 55016-1-6:2015; it was approved by CENELEC on 2017-02-17. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 55016-1-6:2015/A1:2017 E
---------------------- Page: 3 ----------------------
SIST EN 55016-1-6:2015/A1:2017
EN 55016-1-6:2015/A1:2017
European foreword

The text of document CISPR/A/1195/FDIS, future CISPR 16-1-6:2014/A1, prepared by CISPR SC A

"Radio-interference measurements and statistical methods" of CISPR "International special committee

on radio interference" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

as EN 55016-1-6:2015/A1:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-11-26
national level by publication of an identical national
standard or by endorsement
(dow) 2020-05-26
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard CISPR 16-1-6:2014/A1:2017 was approved by CENELEC as a

European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 55016-1-6:2015/A1:2017
CISPR 16-1-6
Edition 1.0 2017-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 1
AMENDEMENT 1
Specification for radio disturbance and immunity measuring apparatus and
methods –
Part 1-6: Radio disturbance and immunity measuring apparatus – EMC antenna
calibration
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 1-6: Appareils de mesure des perturbations radioélectriques et de
l'immunité aux perturbations radioélectriques – Étalonnage des antennes CEM
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10; 33.100.20 ISBN 978-2-8322-3786-1

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 55016-1-6:2015/A1:2017
– 2 – CISPR 16-1-6:2014/AMD1:2017
© IEC 2017
FOREWORD
This amendment has been prepared by CISPR subcommittee A: Radio-interference

measurements and statistical methods, of IEC technical committee CISPR: International

special committee on radio interference.
The text of this amendment is based on the following documents:
FDIS Report on voting
CISPR/A/1195/FDIS CISPR/A/1204/RVD

Full information on the voting for the approval of this amendment can be found in the report

on voting indicated in the above table.

The committee has decided that the contents of this amendment and the base publication will

remain unchanged until the stability date indicated on the IEC website under

"http://webstore.iec.ch" in the data related to the specific publication. At this date, the

publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
_____________
6.3.4 Radiation patterns of an antenna
Add, after the last paragraph of this subclause, the following new paragraph:

Annex I introduces a method for antenna pattern measurement in the frequency range above

1 GHz.
Add, after the existing Annex H, the following new Annex I:
---------------------- Page: 6 ----------------------
SIST EN 55016-1-6:2015/A1:2017
CISPR 16-1-6:2014/AMD1:2017 – 3 –
© IEC 2017
Annex I
(normative)
Antenna pattern measurement method in the frequency
range above 1 GHz, with measurement uncertainty budget
I.1 General

All measurement methods in the CISPR 16 series need an estimation of the measurement

uncertainty. A common approach is to list all contributions and to determine the influence of

each one. This works very well if the uncertainty contributions are independent from the EUT

itself. In case of antenna pattern measurements above 1 GHz uncertainty contributions are

NOT independent from the EUT.
The major uncertainty contributions are:
a) reflections inside the antenna chamber;
b) reflections from the transmit antenna mast and the receive antenna mast;
c) positioning uncertainty of the turntable leading to azimuth drift;
d) alignment of the antennas;
e) reflections between antennas.

All of these contributions are dependent on the antenna pattern to be measured as follows:

1) The nature of the pattern of omnidirectional antennas will lead to stronger reflections from

objects around the antenna and from all surfaces of the anechoic chamber.

2) Coupling with the antenna mast is more significant if omnidirectional antennas or

directional antennas with a strong back lobe are measured.

3) Uncertainty of the turntable positioning can be seen if directional antennas with a high-

gradient antenna pattern are measured.
4) Alignment is more critical if directive antennas are measured.

5) Unwanted coupling between measurement antennas exists if the dimensions of the

antennas are electrically large.

To account for these effects on uncertainty this measurement method includes a statistical

estimation of the measurement uncertainty. The following subclauses describe the set-up and

test method. Because a combined method is used, the problem of separately performing site

validation and antenna mast validation is solved. It is easy for calibration labs to implement,

and the effort is reasonable because the procedure is applied for the following cases:

a) for a new and/or modified chamber and/or turntable;
b) if the receive
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.