Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency

This clause of part 1 is applicable except as follows.
Addition:
This standard applies to open outlet, single point of use, electric instantaneous water heaters intended for household or similar use, for showering purposes without downstream mixing.
This standard only specifies tests for the assessment of energy efficiency.
This standard does not apply to electrical instantaneous water heaters covered by other parts of this series of standards.

Elektro-Durchfluss-Wassererwärmer - Teil 2-2: Anforderungen an die Gebrauchseigenschaften - Durchfluss-Wassererwärmer für eine einzelne Zapfstelle - Effizienz

Chauffe-eau électriques instantanés - Partie 2-2 : Exigences d’aptitude à la fonction - Chauffe-eau instantané de douches à un seul point d'utilisation - Efficacité

Električni pretočni grelniki vode - 2-2. del: Zahtevane lastnosti - Električni pretočni grelniki vode za uporabo na enem mestu - Učinkovitost - Dopolnilo A1

General Information

Status
Published
Publication Date
08-Sep-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Sep-2020
Due Date
12-Nov-2020
Completion Date
09-Sep-2020

RELATIONS

Buy Standard

Amendment
SIST EN 50193-2-2:2017/A1:2020
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 50193-2-2:2017/A1:2020
01-oktober-2020

Električni pretočni grelniki vode - 2-2. del: Zahtevane lastnosti - Električni pretočni

grelniki vode za uporabo na enem mestu - Učinkovitost - Dopolnilo A1

Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point

of use electric instantaneous showers - Efficiency
Elektro-Durchfluss-Wassererwärmer - Teil 2-2: Anforderungen an die

Gebrauchseigenschaften - Durchfluss-Wassererwärmer für eine einzelne Zapfstelle -

Effizienz

Chauffe-eau électriques instantanés - Partie 2-2 : Exigences d’aptitude à la fonction -

Chauffe-eau instantané de douches à un seul point d'utilisation - Efficacité
Ta slovenski standard je istoveten z: EN 50193-2-2:2016/A1:2020
ICS:
91.140.65 Oprema za ogrevanje vode Water heating equipment
97.100.10 Električni grelniki Electric heaters
SIST EN 50193-2-2:2017/A1:2020 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50193-2-2:2017/A1:2020
---------------------- Page: 2 ----------------------
SIST EN 50193-2-2:2017/A1:2020
EUROPEAN STANDARD EN 50193-2-2:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 91.140.65
English Version
Electric instantaneous water heaters - Part 2-2: Performance
requirements - Single point of use electric instantaneous
showers - Efficiency

Chauffe-eau électriques instantanés - Partie 2-2 : Elektro-Durchfluss-Wassererwärmer - Teil 2-2:

Exigences d’aptitude à la fonction - Chauffe-eau instantané Anforderungen an die Gebrauchseigenschaften -

de douches à un seul point d'utilisation - Efficacité Durchfluss-Wassererwärmer für eine einzelne Zapfstelle -

Effizienz

This amendment A1 modifies the European Standard EN 50193-2-2:2016; it was approved by CENELEC on 2020-06-17. CENELEC

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the

status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the

responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as

the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 50193-2-2:2016/A1:2020 E
---------------------- Page: 3 ----------------------
SIST EN 50193-2-2:2017/A1:2020
EN 50193-2-2:2016/A1:2020 (E)
European foreword

This document (EN 50193-2-2:2016/A1:2020) has been prepared by CLC/TC 59X “Performance of household and

similar electrical appliances”.
The following dates are fixed:
• latest date by which this document has (dop) 2021–06–17
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023–06–17
standards conflicting with this document
have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document.

---------------------- Page: 4 ----------------------
SIST EN 50193-2-2:2017/A1:2020
EN 50193-2-2:2016/A1:2020 (E)

1 Modification to Annex ZZA, “Relationship between this European Standard and the

energy labelling requirements of Commission Delegated Regulation (EU) No 812/2013

aimed to be covered” and Annex ZZB, “Relationship between this European Standard

and the ecodesign requirements of Commission Regulation (EU) No 814/2013 aimed to

be covered”
Replace the Annexes ZZA and ZZB with the following:
Annex ZZA
(informative)
Relationship between this European Standard and the energy labelling
requirements of Commission Delegated Regulation (EU) No 812/2013 aimed to
be covered

This European standard has been prepared under a Commission’s standardization request, M/534 C(2015) 2625 final

to provide one voluntary means of conforming to the energy labelling requirements of Commission Delegated

Regulation (EU) No 812/2013 of 18 February 2013 supplementing Directive 2010/30/EU of the European Parliament

and of the Council with regard to energy labelling of water heaters, hot water storage tanks and packages of water

heater and solar device, OJ L239, 6.9.2013.

Once this standard is cited in the Official Journal of the European Union under that Regulation, compliance with the

normative clauses of this standard given in Table ZZA.1 confers, within the limits of the scope of this standard, a

presumption of conformity with the corresponding energy labelling requirements of that Regulation and associated

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.