SIST EN 61338-4-1:2005

Waveguide type dielectric resonators -- Part 4-1: Blank detail specification

Is a blank detail specification and as such a supplementary document to the sectional specification EN 61338-4. Contains requirements for the minimum content of detail specifications.

Dielektrische Resonatoren vom Wellenleitertyp -- Teil 4-1: Vordruck für die Bauspezifikation

Résonateurs diélectriques à modes guidés -- Partie 4-1: Spécification particulière cadre

Is a blank detail specification and as such a supplementary document to the sectional specification EN 61338-4. Contains requirements for the minimum content of detail specifications.

Dielektrični resonatorji valovodnega tipa – 4-1. del: Okvirna podrobna specifikacija (IEC 61338-4-1:2005)

General Information

• Status: Published
• Publication Date: 30-Nov-2005
• ICS: 31.140 - Piezoelectric devices
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2005
• Due Date: 01-Dec-2005
• Completion Date: 01-Dec-2005
• Ref Project: EN 61338-4-1:2005 - Waveguide type dielectric resonators - Part 4-1: Blank detail specification

Standards Content (Sample)

SLOVENSKI SIST EN 61338-4-1:2005

STANDARD
december 2005
Dielektrični resonatorji valovodnega tipa – 4-1. del: Okvirna podrobna
specifikacija (IEC 61338-4-1:2005)
Waveguide type dielectric resonators – Part 4-1: Blank detail specification (IEC
61338-4-1:2005)
ICS 31.140; 33.120.10 Referenčna številka
SIST EN 61338-4-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61338-4-1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2005

ICS 31.140


English version


Waveguide type dielectric resonators
Part 4-1: Blank detail specification
(IEC 61338-4-1:2005)


Résonateurs diélectriques  Dielektrische Resonatoren
à modes guidés vom Wellenleitertyp
Partie 4-1: Spécification particulière cadre Teil 4-1: Vordruck für die Bauspezifikation
(CEI 61338-4-1:2005) (IEC 61338-4-1:2005)






This European Standard was approved by CENELEC on 2005-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61338-4-1:2005 E

---------------------- Page: 2 ----------------------

EN 61338-4-1:2005 - 2 -
Foreword
The text of document 49/703/FDIS, future edition 1 of IEC 61338-4-1, prepared by IEC TC 49,
Piezoelectric and dielectric devices for frequency control and selection, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61338-4-1 on 2005-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61338-4-1:2005 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61338-4-1:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61338-1 - Waveguide type dielectric resonators EN 61338-1 2005
Part 1: Generic specification

1) 2)
IEC 61338-4 - Part 4: Sectional specification EN 61338-4 2005




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 61338-4-1





First edition
2005-03


Waveguide type dielectric resonators –
Part 4-1:
Blank detail specification

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
H
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 61338-4-1  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

WAVEGUIDE TYPE DIELECTRIC RESONATORS –

Part 4-1: Blank detail specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this I
...