SIST EN 1175-1:1998

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

1.1  This standard specifies electrical and related mechanical safety requirements for design and construction of the electrical installation in battery powered industrial trucks hereinafter referred to as trucks, with nominal voltages of the truck system up to 240 V. The Annex A is normative and gives requirements for "Connectors for traction batteries". Annex B is normative and contains "Electric motors - Output and test rules" and Annex C is normative and contains "Electromagnetic contactors".   NOTE 1: Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types.   NOTE 2: This standard does not address the subject of charging of traction batteries (CENELEC TC 21X is preparing safety standards for battery charging).   NOTE 3: This standard does not address the subject of electromagnetic compatibility (EMC).    NOTE 4: The special requirements for operation in potentially explosive atmospheres are not covered in this standard.   1.2  The requirements of this standard are applicable, when trucks are operated under the following climatic conditions:   - Average ambient temperature for continuous duty: +25 oC;  - Maximum ambient temperature, short term (up to 1 h): +40 oC;  - Lowest ambient temperature for trucks intended for use in normal indoor conditions:  +5 oC;   - Lowest ambient temperature for trucks intended for use in normal outdoor conditions:  -20 oC;  - Altitude: up to 2000 m;  - Relative humidity: in the range 30 % to 95 % (non condensing).   1.3  This standard covers specific hazards (listed in clause 4), which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, de-commissioning and disposal, reference should be made to EN 292:1991.

Sicherheit von Flurförderzeugen - Elektrische Anforderungen - Teil 1: Allgemeine Anforderungen für Flurförderzeuge mit batterieelektrischem Antrieb

Diese Norm schreibt die elektrischen und damit zusammenhängenden mechanischen Sicherheitsanforderungen für die Auslegung und Herstellung der elektrischen Ausrüstung von Flurförderzeugen mit batterieelektrischem Antrieb (im Folgenden Flurförderzeuge genannt) mit Nennspannungen des Flurförderzeug-Systems bis einschließlich 240 V vor. Der Anhang A ist normativ und enthält die Anforderungen für "Steckvorrichtungen für Fahrzeugbatterien". Der Anhang B ist normativ und gilt für "Elektromotoren - Leistungsabgabe und Prüfanforderungen u. der Anhang C ist normativ.

Sécurité des chariots de manutention - Prescriptions électriques - Partie 1: Prescriptions générales des chariots alimentés par batterie

La présente norme spécifies les prescriptions de sécurité électriques et les prescriptions mécaniques associées pour la conception et la construction de l'installation électrique des chariots de manutention alimentés par batterie, appelés "Chariots" dans la suite du document, pour des tensions nominales du circuit du chariot allant jusqu'a 240 V inclus. L'annexe A est normative et traite des "Connecteurs pour batteries de traction". L'annexe B est normative et traite des "Moteurs électrique - Regles de puissance et d'essai" et l'annexe C est normative et traite des "Contacteurs électromagnétiques".

Varnost vozil za talni transport - Električne zahteve - 1. del: Splošne zahteve za električna vozila za talni transport na baterijski pogon

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 05-May-2011
• ICS: 43.120 - Electric road vehicles
• ICS: 53.060 - Industrial trucks
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-May-2011
• Due Date: 28-May-2011
• Completion Date: 06-May-2011
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: EN 1175-1:1998 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

Relations

• Consolidated By: SIST EN 1175-1:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 1175-1:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
• Effective Date: 19-Jan-2023
• Revised: SIST EN 1175-1:1998/kFprA1:2010 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
• Effective Date: 01-Jul-2010
• Replaced By: SIST EN 1175-1:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
• Effective Date: 01-Jun-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Flurförderzeugen - Elektrische Anforderungen - Teil 1: Allgemeine Anforderungen für Flurförderzeuge mit batterieelektrischem AntriebSécurité des chariots de manutention - Prescriptions électriques - Partie 1: Prescriptions générales des chariots alimentés par batterieSafety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks53.060Industrijski tovornjakiIndustrial trucks43.120Electric road vehiclesICS:Ta slovenski standard je istoveten z:EN 1175-1:1998SIST EN 1175-1:1998en01-april-1998SIST EN 1175-1:1998SLOVENSKI
STANDARD



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-1:1998



SIST EN 1175-
...