iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1999-1-4:2007/A1:2012

(Amendment)

Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting

Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards construction products relevant for aluminium structures - EN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - EN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

Eurocode 9: Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-4: Kaltgeformte Profiltafeln

Eurocode 9 - Calcul des structures en aluminium - Partie 1-4: Tôles de structure formées à froid

Evrokod 9: Projektiranje konstrukcij iz aluminijevih zlitin - 1-4. del: Hladno oblikovane konstrukcijske pločevine

EN 1999 se uporablja na področju projektiranja zgradb in gradbeništva, ter gradbenih objektov iz aluminija. Je v skladu z načeli in zahtevami za varnost in uporabnost objektov, osnovo njihovega projektiranja in preverjanja, ki so podani v EN 1990 – Osnove projektiranja.  EN 1999 se ukvarja samo z zahtevami glede odpornosti, uporabnosti, trajnosti in požarne odpornosti aluminijevih konstrukcij. Drugih zahtev, npr. glede toplotne ali zvočne izolacije, ne obravnava. EN 1999 je namenjen uporabi v povezavi z: - EN 1990 "Osnove projektiranja", - EN 1991 "Vplivi na konstrukcije", - evropski standardi za gradbene izdelke, ki se nanašajo na aluminijeve konstrukcije, - EN 1090-1: Izvedba jeklenih in aluminijastih konstrukcij, – prvi del: Zahteve za ugotavljanje skladnosti sestavnih delov konstrukcij, - EN 1090-3: Izvedba jeklenih in aluminijastih konstrukcij – tretji del: Tehnične zahteve za aluminijaste konstrukcije EN 1999 je razdeljen v pet delov: EN 1999-1-1 Projektiranje konstrukcij iz aluminijevih zlitin: Splošna pravila za konstrukcije. EN 1999-1-2 Projektiranje konstrukcij iz aluminijevih zlitin: Projektiranje požarnovarnih konstrukcij. EN 1999-1-3 Projektiranje konstrukcij iz aluminijevih zlitin: Konstrukcije občutljive na utrujenost. EN 1999-1-4 Projektiranje konstrukcij iz aluminijevih zlitin: Hladno oblikovane konstrukcijske pločevine. EN 1999-1-5 Projektiranje konstrukcij iz aluminijevih zlitin: Lupinaste konstrukcije.

General Information

Status
Published
Public Enquiry End Date
30-Dec-2010
Publication Date
18-Dec-2011
ICS
91.010.30 - Technical aspects
91.080.17 - Aluminium structures
Technical Committee
KON - Structures
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Sep-2011
Due Date
10-Nov-2011
Completion Date
19-Dec-2011
Ref Project
EN 1999-1-4:2007/A1:2011 - Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting

Relations

Replaces
SIST EN 1999-1-4:2007 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Effective Date
01-Jan-2011
Replaced By
SIST EN 1999-1-4:2023 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Effective Date
01-Mar-2028

Buy Standard

EN 1999-1-4:2007/A1:2012EN 1999-1-4:2007/A1:2012
PreviousNext
Amendment
EN 1999-1-4:2007/A1:2012
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1999-1-4:2007/kFprA1:2010EN 1999-1-4:2007/kFprA1:2010
PreviousNext
Draft
EN 1999-1-4:2007/kFprA1:2010
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1999-1-4:2007/A1:2012
01-februar-2012
1DGRPHãþD
SIST EN 1999-1-4:2007
(YURNRG3URMHNWLUDQMHNRQVWUXNFLML]DOXPLQLMHYLK]OLWLQGHO+ODGQR
REOLNRYDQHNRQVWUXNFLMVNHSORþHYLQH
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Eurocode 9: Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-4:
Kaltgeformte Profiltafeln
Eurocode 9 - Calcul des structures en aluminium - Partie 1-4: Tôles de structure formées
à froid
Ta slovenski standard je istoveten z: EN 1999-1-4:2007/A1:2011
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.10 Kovinske konstrukcije Metal structures
SIST EN 1999-1-4:2007/A1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1999-1-4:2007/A1:2012

---------------------- Page: 2 ----------------------

SIST EN 1999-1-4:2007/A1:2012


EUROPEAN STANDARD
EN 1999-1-4:2007/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 91.010.30; 91.080.10
English Version
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-
formed structural sheeting
Eurocode 9 - Calcul des structures en aluminium - Partie 1- Eurocode 9: Bemessung und Konstruktion von
4: Tôles de structure formées à froid Aluminiumtragwerken - Teil 1-4: Kaltgeformte Profiltafeln
This amendment A1 modifies the European Standard EN 1999-1-4:2007; it was approved by CEN on 8 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1999-1-4:2007/A1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIS
...

SLOVENSKI STANDARD
SIST EN 1999-1-4:2007/kFprA1:2010
01-december-2010
(YURNRG3URMHNWLUDQMHNRQVWUXNFLML]DOXPLQLMHYLK]OLWLQGHO+ODGQR
REOLNRYDQHNRQVWUXNFLMVNHSORþHYLQH
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Eurocode 9: Bemessung und Konstruktion von Aluminiumtragwerken - Teil 1-4:
Kaltgeformte Profiltafeln
Eurocode 9 - Calcul des structures en aluminium - Partie 1-4: Tôles de structure formées
à froid
Ta slovenski standard je istoveten z: EN 1999-1-4:2007/FprA1
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
91.080.10 Kovinske konstrukcije Metal structures
SIST EN 1999-1-4:2007/kFprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1999-1-4:2007/kFprA1:2010

---------------------- Page: 2 ----------------------
SIST EN 1999-1-4:2007/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 1999-1-4:2007
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
October 2010
ICS 91.010.30; 91.080.10
English Version
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-
formed structural sheeting
Eurocode 9 - Calcul des structures en aluminium - Partie 1- Eurocode 9: Bemessung und Konstruktion von
4: Tôles de structure formées à froid Aluminiumtragwerken - Teil 1-4: Kaltgeformte Profiltafeln
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 250.

This draft amendment A1, if approved, will modify the European Standard EN 1999-1-4:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1999-1-2:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023

1.1   Scope of EN 1999-1-2
(1)   EN 1999-1-2 deals with the design of aluminium structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1999-1-1, EN 1999-1-2, EN 1999-1-3, EN 1999-1-4 and EN 1999-1-5. This document only identifies differences from, or supplements to, normal temperature design.
(2)   EN 1999-1-2 applies to aluminium structures required to fulfil a load bearing function.
(3)   EN 1999-1-2 gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(4)   EN 1999-1-2 applies to structures, or parts of structures, that are within the scope of EN 1999 1 1 and are designed accordingly.
(5)   The methods given in EN 1999-1-2 are applicable to the following aluminium alloys:
EN AW-3004 - H34   EN AW-5083 - O and H12   EN AW-6063 - T5 and T6
EN AW-5005  -  O and H34   EN AW-5454 - O and H34   EN AW-6082 - T4 and T6
EN AW-5052  - H34      EN AW-6061 - T6   
(6)   The methods given in EN 1999-1-2 are applicable also to other aluminium alloy/tempers of EN 1999 1-1, if reliable material properties at elevated temperatures are available or the simplified assumptions in 5.2.1 are applied.
1.2   Assumptions
(1)   In addition to the general assumptions of EN 1990, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.
-   any active and passive fire protection systems taken into account in the design will be adequately maintained.
(2)   For the design of new structures, EN 1999 is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997, EN 1998 and EN 1999.
(3)   EN 1999 is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
-   EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-4:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2023

1.1   Scope of EN 1999-1-4
(1)P   This document gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking.
NOTE 1   The rules in this part complement the rules in other parts of EN 1999-1.
NOTE 2    The execution of aluminium structures made of cold-formed structures for roof, ceiling, floor and wall applications is covered in EN 1090-5.
(2)   This document gives methods for stressed-skin design using aluminium sheeting as a structural diaphragm.
(3)   This document does not apply to cold-formed aluminium profiles like C- and Z- profiles nor cold-formed and welded circular or rectangular hollow sections.
(4)   This document gives methods for design by calculation and for design assisted by testing. The methods for the design by calculation apply only within stated ranges of material properties and geometrical properties for which sufficient experience and test evidence is available. These limitations do not apply to design by testing.
(5)   This document does not cover load arrangement for loads during execution and maintenance.
1.2   Assumptions
(1) For the design of new structures, prEN 1999 (all parts) is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997 and EN 1998.
EN 1999 (all parts) is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090-1: Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
-   EN 1090-5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-5:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2023

1.1   Scope of EN 1999 1 5
(1)   EN 1999 1 5 applies to the structural design of aluminium structures, stiffened and unstiffened, that have the form of a shell of revolution or of a round panel in monocoque structures.
(2)   EN 1999 1 5 covers additional provisions to those given in the relevant parts of EN 1999 for design of aluminium structures.
NOTE    Supplementary information for certain types of shells is given in EN 1993 1 6 and the relevant application parts which include:
-   Part 3-1 for towers and masts;
-   Part 3-2 for chimneys;
-   Part 4-1 for silos;
-   Part 4-2 for tanks;
-   Part 4-3 for pipelines.
(4)   The provisions in EN 1999 1 5 apply to axisymmetric shells (cylinders, cones, spheres) and associated circular or annular plates, beam section rings and stringer stiffeners, where they form part of the complete structure.
(5)   Single shell panels (cylindrical, conical or spherical) are not explicitly covered by EN 1999 1 5. However, the provisions can be applicable if the appropriate boundary conditions are duly taken into account.
(6)   Types of shell walls covered in EN 1999 1 5 can be (see Figure 1.1):
-   shell wall constructed from flat rolled sheet with adjacent plates connected with butt welds, termed ‘isotropic’;
-   shell wall with lap joints formed by connecting adjacent plates with overlapping sections, termed lap-jointed;
-   shell wall with stiffeners attached to the outside, termed ‘externally stiffened’ irrespective of the spacing of stiffeners;
-   shell wall with the corrugations running up the meridian, termed ‘axially corrugated’;
-   shell wall constructed from corrugated sheets with the corrugations running around the shell circumference, termed ‘circumferentially corrugated’.
(7)   The provisions of EN 1999 1 5 are intended to be applied within the temperature range defined in EN 1999 1 1. The maximum temperature is restricted so that the influence of creep can be neglected. For structures subject to elevated temperatures associated with fire see EN 1999 1 2.
(8)   EN 1999 1 5 does not cover the aspect of leakage.
1.2   Assumptions
(1)   The general assumptions of EN 1990 apply.
(2)   The provisions of EN 1999 1 1 apply.
(3)   The design procedures are valid only when the requirements for execution in EN 1090 3 or other equivalent requirements are complied with.
(4)   For the design of new structures, prEN 1999 (all parts) is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997 and EN 1998.
(5)   EN 1999 (all parts) is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090 1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
-   EN 1090 3: Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-1:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-1:2023

EN 1999 applies to the design of buildings and civil engineering and structural works made of aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.
EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.
EN 1999 is intended to be used in conjunction with:
—   EN 1990 Basis of structural design
—   EN 1991 Actions on structures
—   European Standards for construction products relevant for aluminium structures
—   EN 1090-1: Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
—   EN 1090-3: Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures.
EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys.
The following limits are recommended – if not otherwise explicitly stated in this standard:
   components with material thickness not less than 0,6 mm;
   welded components with material thickness not less than 1,5 mm;
   connections with:
—   steel bolts and pins with diameter not less than 5 mm;
—   aluminium bolts and pins with diameter not less than 8 mm;
—   rivets and thread forming screws with diameter not less than 3,9 mm

  • Standard
    371 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    364 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-3:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2023

1.1 Scope of EN 1999-1-3
(1) This document gives the basis for the design of aluminium alloy structures subject to fatigue in the ultimate limit state.
(2) This document gives rules for:
- safe life design;
- damage tolerant design;
- design assisted by testing.
(3) This document does not cover pressurized containment vessels or pipework.
1.2 Assumptions
(1) The general assumptions of EN 1990 apply.
(2) The provisions of EN 1999-1-1 apply.
(3) EN 1999-1-3 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), relevant parts in EN 1992 to EN 1999, EN 1090-1 and EN 1090-3 for requirements for execution, and ENs, EADs and ETAs for construction products relevant to aluminium structures.

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-1:2007/A2:2014(Amendment)
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A2:2013

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards for construction products relevant for aluminium structures - prEN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - prEN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

  • Amendment
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-3:2007/A1:2012(Amendment)
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2007/A1:2011

(1) EN 1999-1-3 gives the basis for the design of aluminium alloy structures with respect to the limit state of fracture induced by fatigue.
(2) EN 1999-1-3 gives rules for:
-   Safe life design;
-   damage tolerant design;
-   design assisted by testing.
(3) EN 1999-1-3 is intended to be used in conjunction with EN 1090-3 "Technical requirements for the execution of aluminium structures" which contains the requirements necessary for the design assumptions to be met during execution of components and structures.
(4) EN 1999-1-3 does not cover pressurised containment vessels or pipe-work.

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-4:2007/AC:2010(Corrigendum)
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/AC:2009

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards construction products relevant for aluminium structures - EN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - EN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-5:2007/AC:2010(Corrigendum)
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2007/AC:2009

TC - Modifications to Subclauses A.1.3.1, A.1.3.2 and A.1.4.2 in the E mother reference version.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-2:2007/AC:2009(Corrigendum)
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2007/AC:2009

EN 1999 applies to the design of buildings and civil engineering works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures", all relevant parts European Standards for construction products relevant for aluminium structures - EN 1998 "Design of structures for earthquake resistance", where aluminium structures are built in seismic regions EN 1999 is subdivided in five parts: - EN 1999-1-1 Design of aluminium structures: General structural rules - EN 1999-1-2 Design of aluminium structures: - Structural fire design - EN 1999-1-3 Design of aluminium structures: Structures susceptible to fatigue - EN 1999-1-4 Design of aluminium structures: Cold formed structural sheeting - EN 1999-1-5 Design of aluminium structures: Shell structures.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day