oSIST prEN IEC 60704-2-1:2025
(Main)Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die Bestimmung der Luftschallemission - Teil 2-1: Besondere Anforderungen an Trockensauger
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit aérien - Partie 2-1: Exigences particulières pour les aspirateurs à sec
Gospodinjski in podobni električni aparati - Postopek preskušanja za ugotavljanje zvočnega hrupa v zraku - 2-1. del: Posebne zahteve za suhe sesalnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Gospodinjski in podobni električni aparati - Postopek preskušanja za ugotavljanje
zvočnega hrupa v zraku - 2-1. del: Posebne zahteve za suhe sesalnike
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die
Bestimmung der Luftschallemission - Teil 2-1: Besondere Anforderungen an
Trockensauger
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit
aérien - Partie 2-1: Exigences particulières pour les aspirateurs à sec
Ta slovenski standard je istoveten z: prEN IEC 60704-2-1:2025
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
97.080 Aparati za čiščenje Cleaning appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
59F/518/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60704-2-1 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-01-31 2025-04-25
SUPERSEDES DOCUMENTS:
59F/502/CD, 59F/511A/CC
IEC SC 59F : SURFACE CLEANING APPLIANCES
SECRETARIAT: SECRETARY:
Sweden Mr Ingvar Eriksson
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
TC 59,TC 61
ASPECTS CONCERNED:
Environment
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Household and similar electrical appliances - Test code for the determination of airborne acoustical
noise - Part 2-1: Particular requirements for dry vacuum cleaners
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose
without permission in writing from IEC.
59F/518/CDV – 2 – IEC CDV 60704-2-1 © IEC 2025
1 CONTENTS
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 6
8 4 Measurement methods and acoustical environments . 7
9 4.2 Direct method . 7
10 4.3 Comparison method . 7
11 4.4 Acoustical environment . 7
12 4.5 Measurement uncertainty . 8
13 5 Instrumentation. 9
14 5.1 Instrumentation for measuring acoustical data . 9
15 6 Operation and location of appliances under test . 9
16 6.1 Equipping and pre-conditioning of appliances . 9
17 6.2 Supply of electric energy and of water or gas . 11
18 6.4 Loading and operating of appliances during tests . 11
19 6.5 Location and mounting of appliances . 12
20 7 Measurement of sound pressure levels . 16
21 7.4 Measurements . 16
22 9 Information to be recorded . 16
23 10 Information to be reported . 16
24 Annexes . 18
25 Annex A (normative) Standard test table . 18
26 Bibliography . 19
28 Figure 101 – Appliance with cleaning head connected directly . 13
29 Figure 102 – Appliance with the cleaning head connected by hose and connecting tube . 14
31 Table 1 – Standard deviations of sound power levels determined on carpets . 8
32 Table 2 – Standard deviations of sound power levels determined on hard floors . 8
33 Table 3 – Standard deviations for declaration and verification for vacuum cleaners for
34 carpets . 8
35 Table 4 – Standard deviations for declaration and verification for vacuum cleaners for
36 hard floors . 9
IEC CDV 60704-2-1 © IEC 2025 – 3 – 59F/518/CDV
39 INTERNATIONAL ELECTROTECHNICAL COMMISSION
40 ____________
42 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
43 TEST CODE FOR THE DETERMINATION
44 OF AIRBORNE ACOUSTICAL NOISE
46 Part 2-1: Particular requirements for dry vacuum cleaners
50 FOREWORD
51 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
52 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
53 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
54 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
55 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
56 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
57 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
58 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
59 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
60 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
61 consensus of opinion on the relevant subjects since each technical committee has representation from all
62 interested IEC National Committees.
63 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
64 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
65 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
66 misinterpretation by any end user.
67 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
68 transparently to the maximum extent possible in their national and regional publications. Any divergence between
69 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
70 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
71 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
72 services carried out by independent certification bodies.
73 6) All users should ensure that they have the latest edition of this publication.
74 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
75 members of its technical committees and IEC National Committees for any personal injury, property damage or
76 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
77 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
78 Publications.
79 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
80 indispensable for the correct application of this publication.
81 9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
82 patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
83 respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
84 may be required to implement this document. However, implementers are cautioned that this may not represent
85 the latest information, which may be obtained from the patent database available at https://patents.iec.ch shall
86 not be held responsible for identifying any or all such patent rights.
87 IEC 60704-2-1 has been prepared by subcommittee 59F: Surface cleaning appliances, of IEC
88 technical committee 59: Performance of household and similar electrical appliances. It is an
89 International Standard.
90 This fifth edition cancels and replaces the fourth edition published in 2020. This edition
91 constitutes a technical revision.
92 This edition includes the following significant technical changes with respect to the previous
93 edition:
94 a) alignment with IEC 60704-1:2021;
59F/518/CDV – 4 – IEC CDV 60704-2-1 © IEC 2025
95 b) addressing consumer relevant testing aspects;
96 c) robustness of standards and closing potential loop holes
97 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
99 Full information on the voting for its approval can be found in the report on voting indicated in
100 the above table.
101 The language used for the development of this International Standard is English.
102 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
103 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement available
104 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
105 described in greater detail at www.iec.ch/publications.
106 This document is intended to be used in conjunction with IEC 60704-1:2021, Household and
107 similar electrical appliances – Test code for the determination of airborne acoustical noise –
108 Part 1: General requirements.
109 The relevant text of IEC 60704-1:2021 as amended by this document establishes the test code
110 for vacuum cleaners.
111 This document supplements or modifies the corresponding clauses in IEC 60704-1:2021. When
112 a particular subclause of IEC 60704-1:2021 is not mentioned in this document, that subclause
113 is applicable as far as reasonable. Where this standard states "addition", "modification" or
114 "replacement", the relevant requirements, test specifications or explanatory matter in Part 1
115 should be adapted accordingly.
116 Subclauses, tables, and figures that are additional to those in IEC 60704-1:2021 are numbered
117 starting from 101. Additional annexes are lettered AA, BB, etc.
118 Unless notes are in a new subclause or involve notes in IEC 60704-1:2021, they are numbered
119 starting from 101, including those in a replaced clause or subclause.
120 In this standard, the following print types are used:
121 • terms defined in Clause 3: bold type.
122 A list of all the parts in the IEC 60704 series, published under the general title Household and
123 similar electrical appliances – Test code for the determination of airborne acoustical noise, can
124 be found on the IEC website.
125 The committee has decided that the contents of this document will remain unchanged until the
126 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
127 specific document. At this date, the document will be
128 • reconfirmed,
129 • withdrawn,
130 • replaced by a revised edition, or
131 • amended.
IEC CDV 60704-2-1 © IEC 2025 – 5 – 59F/518/CDV
133 INTRODUCTION
134 The measuring conditions specified in this document provide for suf
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.