SIST EN ISO 21179:2007
(Main)Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2005)
Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2005)
This International Standard specifies a test method for the determination of the electrostatic field generated by a running light conveyor belt according to ISO 21183-1. This dynamic procedure is required because the antistatic behaviour of light conveyor belts cannot in many cases be sufficiently described by measurement of the electrical resistances in accordance with ISO 21178.
Leichte Fördergurte - Bestimmung des elektrostatischen Feldes von laufenden, leichten Fördergurten (ISO 21179:2005)
Diese Internationale Norm legt das Prüfverfahren für die Bestimmung des elektrischen Feldes bei einem laufendem leichten Fördergurt nach ISO 21183-1fest.
Die dynamische Prüfung wird benötigt, weil das antistatische Verhalten von leichten Fördergurten nicht immer ausreichend durch Messungen der elektrischen Widerstände nach ISO 21178 beschrieben werden kann.
Courroies transporteuses légeres - Détermination du champ électrostatique engendré par une courroie transporteuse légere en marche (ISO 21179:2005)
L'ISO 21179:2005 spécifie une méthode d'essai pour mesurer le champ électrostatique engendré par une courroie transporteuse légère en marche du type décrit dans l'ISO 21183-1.
Naprave za kontinuirni transport – Lahki trakovi tračnih transporterjev – Ugotavljanje elektrostatičnega polja zaradi delovanja tračnih transporterjev z lahkimi trakovi (ISO 21179:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 21179:2007
01-april-2007
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW±/DKNLWUDNRYLWUDþQLKWUDQVSRUWHUMHY±
8JRWDYOMDQMHHOHNWURVWDWLþQHJDSROMD]DUDGLGHORYDQMDWUDþQLKWUDQVSRUWHUMHY]
ODKNLPLWUDNRYL ,62
Light conveyor belts - Determination of the electrostatic field generated by a running light
conveyor belt (ISO 21179:2005)
Leichte Fördergurte - Bestimmung des elektrostatischen Feldes von laufenden, leichten
Fördergurten (ISO 21179:2005)
Courroies transporteuses légeres - Détermination du champ électrostatique engendré
par une courroie transporteuse légere en marche (ISO 21179:2005)
Ta slovenski standard je istoveten z: EN ISO 21179:2006
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 21179:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 21179
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 53.040.10 Supersedes EN 1718:1999
English Version
Light conveyor belts - Determination of the electrostatic field
generated by a running light conveyor belt (ISO 21179:2005)
Courroies transporteuses légères - Détermination du Leichte Fördergurte - Bestimmung des elektrostatischen
champ électrostatique engendré par une courroie Feldes von laufenden, leichten Fördergurten (ISO
transporteuse légère en marche (ISO 21179:2005) 21179:2005)
This European Standard was approved by CEN on 21 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21179:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 21179:2006 (E)
Foreword
The text of ISO 21179:2005 has been prepared by Technical Committee ISO/TC 41 "Pulleys and belts
(including veebelts)” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 21179:2006 by Technical Committee CEN/TC 188 "Conveyor belts", the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the
latest by May 2007.
This document supersedes EN 1718:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
Endorsement notice
The text of ISO 21179:2005 has been approved by CEN as EN ISO 21179:2006 without any modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 21179
First edition
2005-11-01
Light conveyor belts — Determination of
the electrostatic field generated by a
running light conveyor belt
Courroies transporteuses légères — Détermination du champ
électrostatique engendré par une courroie transporteuse légère en
marche
Reference number
ISO 21179:2005(E)
©
ISO 2005
---------------------- Page: 4 ----------------------
ISO 21179:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 21179:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21179 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This International Standard is based on EN 1718:1999, prepared by CEN/TC 188.
© ISO 2005 – All rights reserved iii
---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 21179:2005(E)
Light conveyor belts — Determination of the electrostatic field
generated by a running light conveyor belt
1 Scope
This International Standard specifies a test method for the determination of the electrostatic field generated by
a running light conv
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.