SIST EN 16603-50-26:2022
(Main)Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1
Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation Procedure-1
This document identifies the clauses and requirements modified with respect to the standards CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2, September 2010 for application in ECSS.
NOTE The recently published technical corrigendum has modified CCSDS 232.1-B-2. However, the changes are not affecting the Adoption Notice.
Raumfahrttechnik - Adaption CCSDS 232.1-B-2, Kommunikations-Operationsprozedur-1 (COP-1)
Ingénierie spatiale - Notice d’adoption de la CCSDS 232.1-B-2, Communications Operation Procedure-1
Le présent document identifie les paragraphes et exigences modifiés par rapport à la norme CCSDS 232.1-B-2, Communications Operation Procedure-1, édition 2, septembre 2010 en vue d'une application dans le cadre de l'ECSS.
NOTE Le rectificatif technique récemment publié a modifié la CCSDS 232.1-B-2. Toutefois, les modifications n'ont pas d'incidence sur l'AS.
Vesoljska tehnika - Sprejem obvestila CCSDS 232.1-B-2, postopek delovanja komunikacij-1
Ta standard določa podatkovne strukture in protokole za daljinsko vodeno vesoljsko podatkovno povezavo ter postopek za delovanje fizičnega sloja.
Običajno se vir podatkov na daljinsko vodeni vesoljski podatkovni povezavi nahaja na tleh, sprejemnik pa se nahaja v vesolju. Vendar se lahko standard uporablja tudi za daljinsko vodene podatkovne povezave znotraj vesolja.
Dodatne določbe in smernice o uporabi tega standarda je mogoče najti v naslednjih dokumentih:
– v standardu višje ravni ECSS-E-ST-50 (Komunikacije), ki določa glavne značilnosti komunikacijskih protokolov in z njimi povezanih storitev za vse ravni komunikacije, pomembne za vesoljsko komunikacijo (od fizične do aplikacijske ravni), in njihove osnovne medsebojne povezave;
– v priročniku ECSS-E-HB-50 (Komunikacijske smernice), ki zagotavlja informacije o posebnih značilnostih vpeljave teh protokolov za podporo pri izbiri določenega komunikacijskega profila za posebne zahteve vesoljske misije.
Uporabniki obstoječega standarda so vabljeni k ogledu teh dokumentov, preden sprejmejo odločitve o izvajanju trenutnega standarda.
Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-50-26:2022
01-september-2022
Nadomešča:
SIST EN 16603-50-04:2015
Vesoljska tehnika - Sprejem obvestila CCSDS 232.1-B-2, postopek delovanja
komunikacij-1
Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation
Procedure-1
Raumfahrttechnik - Adaption CCSDS 232.1-B-2, Kommunikations-Operationsprozedur-1
(COP-1)
Ingénierie spatiale - Notice d’adoption de la CCSDS 232.1-B-2, Communications
Operation Procedure-1
Ta slovenski standard je istoveten z: EN 16603-50-26:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-50-26:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-50-26:2022
---------------------- Page: 2 ----------------------
SIST EN 16603-50-26:2022
EUROPEAN STANDARD EN 16603-50-26
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2022
ICS 49.140
Supersedes EN 16603-50-04:2014
English version
Space engineering - Adoption Notice of CCSDS 232.1-B-2,
Communications Operation Procedure-1
Ingénierie spatiale - Notice d'adoption de la CCSDS Raumfahrttechnik - Adaption CCSDS 232.1-B-2,
232.1-B-2, Communications Operation Procedure-1 Kommunikations-Operationsprozedur-1 (COP-1)
This European Standard was approved by CEN on 27 April 2022.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN 16603-50-26:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-50-26:2022
EN 16603-50-26:2022 (E)
Table of contents
European Foreword . 3
1 Scope . 4
2 Context information. 5
3 Abbreviated terms . 6
4 Application requirements . 7
Bibliography . 11
Tables
Table 4-1: Applicability table for CCSDS 232.1-B-2 . 8
2
---------------------- Page: 4 ----------------------
SIST EN 16603-50-26:2022
EN 16603-50-26:2022 (E)
European Foreword
This document (EN 16603-50-26:2022) has been prepared by Technical Committee CEN-
CENELEC/TC 5 “Space”, the secretariat of which is held by DIN.
This standard (EN 16603-50-26:2022) originates from ECSS-E-AS-50-26C.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 16603-50-24, EN 16603-50-25 and EN 16603-50-26 together supersede EN 16603-50-04:2014.
The main changes with respect to EN 16603-50-04:2014 are listed below:
- Replacement of document by three Adoption Notices.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association.
This document has been developed to cover specifically space systems and has therefore precedence
over any EN covering the same scope but with a wider domain of applicability (e.g. : aerospace).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 16603-50-26:2022
EN 16603-50-26:2022 (E)
1
Scope
This document identifies the clauses and requirements modified with respect to
the standards CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
September 2010 for application in ECSS.
NOTE The recently published technical corrigendum
has modified CCSDS 232.1-B-2. However, the
changes are not affecting the AS.
4
---------------------- Page: 6 ----------------------
SIST EN 16603-50-26:2022
EN 16603-50-26:2022 (E)
2
Context information
The standard CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
has been developed by CCSDS in support of CCSDS 231.0-B adopted by ECSS
with EN 16603-50-26 (ECSS-E-AS-50-26).
In the standard CCSDS 232.0-B-3, TC Space Data Link Protocol, CCSDS specifies a
data link layer protocol for the efficient transfer of space application data of
various types and characteristics over ground-to-space links. The
Communications Operation Procedure-1 (COP-1) specified in CCSDS 232.1-B-2
is used with the TC Space Data Link Protocol: it provides a mechanism for
delivery of frames in sequence and without gaps or duplication.
This Adoption Notice adopts and applies CCSDS 232.1-B-2 with a minimum set
of modifications, identified in the present document, to allow for reference and
for a consistent integration in the ECSS system of standard
...
SLOVENSKI STANDARD
oSIST prEN 16603-50-26:2021
01-september-2021
Vesoljska tehnika - Sprejem obvestila CCSDS 232.1-B-2, postopek delovanja
komunikacij-1, številka 2, september 2010
Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation
Procedure-1, Issue 2, September 2010
Ta slovenski standard je istoveten z: prEN 16603-50-26
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
oSIST prEN 16603-50-26:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16603-50-26:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16603-50-26:2021
EUROPEAN STANDARD
DRAFT
prEN 16603-50-26
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 49.140
English version
Space engineering - Adoption Notice of CCSDS 232.1-B-2,
Communications Operation Procedure-1, Issue 2,
September 2010
Raumfahrttechnik - Adoption Notice von CCSDS 232.1-
B-2, Kommunikationsbetriebsverfahren 1, Ausgabe 2,
September 2010
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
If this draft becomes a European Standard, CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
This draft European Standard was established by CEN and CENELEC in three official versions (English, French, German). A
version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own
language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Recipients of this draft are invited to submit, with their comments, notification
of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
---------------------- Page: 3 ----------------------
oSIST prEN 16603-50-26:2021
prEN 16603-50-26:2021 (E)
Table of contents
European Foreword . 3
1 Scope . 4
2 Context information. 5
3 Abbreviated terms . 6
4 Application requirements . 7
Tables
Table 4-1: Applicability table for CCSDS 232.1-B-2 . 8
2
---------------------- Page: 4 ----------------------
oSIST prEN 16603-50-26:2021
prEN 16603-50-26:2021 (E)
European Foreword
This document (prEN 16603-50-26:2021) has been prepared by Technical
Committee CEN/CLC/TC 5 “Space”, the secretariat of which is held by DIN
(Germany).
This document (prEN 16603-50-26:2021) originates from ECSS-E-AS-50-26C-
DIR1.
This document is currently submitted to the ENQUIRY.
EN 16603-50-24, EN 16603-50-25 and EN 16603-50-26 will together supersede
EN 16603-50-04:2014.
The main changes with respect to EN 16603-50-04:2014 are listed below:
- Replacement of document by three Adoption Notices.
This document has been developed to cover specifically space systems and will
therefore have precedence over any EN covering the same scope but with a
wider do-main of applicability (e.g. : aerospace).
3
---------------------- Page: 5 ----------------------
oSIST prEN 16603-50-26:2021
prEN 16603-50-26:2021 (E)
1
Scope
This document identifies the clauses and requirements modified with respect to
the standards CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
September 2010 for application in ECSS.
NOTE The recently published technical corrigendum
has modified CCSDS 232.1-B-2. However, the
changes are not affecting the AS.
4
---------------------- Page: 6 ----------------------
oSIST prEN 16603-50-26:2021
prEN 16603-50-26:2021 (E)
2
Context information
The standard CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
has been developed by CCSDS in support of CCSDS 231.0-B adopted by ECSS
with EN 16603-50-26 (ECSS-E-AS-50-26).
In the standard CCSDS 232.0-B-3, TC Space Data Link Protocol, CCSDS specifies a
data link layer protocol for the efficient transfer of space application data of
various types and characteristics over ground-to-space links. The
Communications Operation Procedure-1 (COP-1) specified in CCSDS 232.1-B-2
is used with the TC Space Data Link Protocol: it provides a mechanism for
delivery of frames in sequence and without gaps or duplication.
This Adoption Notice adopts and applies CCSDS 232.1-B-2 with a minimum set
of modifications, identified in the present document, to allow for reference and
for a consistent integration in the ECSS system of standards.
The COP-1 protocol of CCSDS 232.1-B-2 was specified in clause 7 (COP-1) of
ECSS-E-ST-50-04 Space data links – Telecommand protocols synchronization and
channel coding.
EN 16603-50-04:2014 (ECSS-E-ST-50-04) is superseded by the following three
Adoption Notices: EN 16603-50-24 (ECSS-E-ST-50-24), EN 16603-50-25 (ECSS-E-
AS-50-25) and EN 16603-50-26 (ECSS-E-AS-50-26).
Differences between this Adoption Note and EN 16603-50-04:2014 (ECSS-E-ST-
50-04) that are not covered by the normative modifications in clause 4 are
described in the informative Annex A.
Overview of superseded EN 16603-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.