iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP CEN/TR 16862:2024

(Main)

Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence

Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence

This Technical Report identifies the quality related responsibilities and tasks included in the supervision of activities related to the welding of products and semi-finished products made of thermoplastic materials and provides guidelines to ensure the quality of the supervision.
The fundamental aspects of this Technical Report are the following:
- definition of tasks and responsibilities;
- definition of the required knowledge, skills and competence.
The plastic welding supervisor (PWS) should be employed by the organization involved in the welding activities. This Technical Report applies to all thermoplastic welding processes.

Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen, Wissen, Fähigkeiten und Kompetenz

Superviseur en soudage de matières plastiques - Missions, responsabilités, connaissances, qualifications et compétences

Nadzornik plastike za varjenje - Naloge, odgovornosti, znanje, spretnosti in kompetence

To tehnično poročilo opredeljuje s kakovostjo povezane odgovornosti in opravila, vključena v nadzor dejavnosti, povezanih z varjenjem izdelkov in polizdelkov iz termoplastičnih materialov, ter navaja smernice za zagotavljanje kakovosti nadzora.
Temeljni vidiki tega tehničnega poročila so naslednji:
– opredelitev opravil in odgovornosti;
– opredelitev zahtevanega znanja, spretnosti in kompetenc.
Organizacija, vključena v dejavnosti varjenja, naj bi zaposlovala nadzornika za varjenje plastike. To tehnično poročilo se uporablja za vse termoplastične postopke varjenja.

General Information

Status
Published
Publication Date
10-Jan-2024
ICS
03.100.30 - Management of human resources
25.160.10 - Welding processes
Technical Committee
IPMA - Polimer materials and products
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2024
Due Date
09-Mar-2024
Completion Date
11-Jan-2024
Ref Project
CEN/TR 16862:2023 - Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence

Relations

Revised
SIST-TP CEN/TR 16862:2015 - Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
Effective Date
19-Jan-2023

Buy Standard

TP CEN/TR 16862:2024TP CEN/TR 16862:2024
PreviousNext
Technical report
TP CEN/TR 16862:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 16862:2024
01-februar-2024
Nadzornik plastike za varjenje - Naloge, odgovornosti, znanje, spretnosti in
kompetence
Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
Kunstostoffschweißaufsicht - Aufgaben, Verantwortungen, Wissen, Fähigkeiten und
Kompetenz
Superviseur en soudage de matières plastiques - Missions, responsabilités,
connaissances, qualifications et compétences
Ta slovenski standard je istoveten z: CEN/TR 16862:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
SIST-TP CEN/TR 16862:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 16862:2024

---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 16862:2024


CEN/TR 16862
TECHNICAL REPORT

RAPPORT TECHNIQUE

December 2023
TECHNISCHER REPORT
ICS 03.100.30; 25.160.10 Supersedes CEN/TR 16862:2015
English Version

Plastics welding supervisor - Task, responsibilities,
knowledge, skills and competence
Superviseur en soudage de matières plastiques - Kunstostoffschweißaufsicht - Aufgaben,
Missions, responsabilités, connaissances, qualifications Verantwortungen, Wissen, Fähigkeiten und Kompetenz
et compétences


This Technical Report was approved by CEN on 17 December 2023. It has been drawn up by the Technical Committee CEN/TC
249.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16862:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 16862:2024
CEN/TR 16862:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Tasks and responsibilities . 8
4.1 General. 8
4.2 Pre-welding activities. 8
4.2.1 General. 8
4.2.2 Contract review . 8
4.2.3 Technical document review . 8
4.2.4 Materials and products . 8
4.2.5 Welding environment . 9
4.2.6 Equipment . 9
4.2.7 Welding personnel . 9
4.2.8 Testing activities . 9
4.2.9 Materials weldability .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13067:2020(Main)
Platics welding personnel - Qualfication of welders - Thermoplastics welded assemblies
EN 13067:2020

This document specifies the method of testing the knowledge and skill of a welder who is required to carry out welds on thermoplastics in new constructions and repair work.
The skill examination of a welder is an essential condition for the assurance of the quality of the welding work.
The application of this document guarantees that the examination is carried out according to a uniform test procedure.
This document applies when the contractor or the authorities responsible for the application require it.
Gas and water utility network industries with alternative qualification programmes are excluded from this document.
This document applies to the following welding processes:
-   hot gas welding: round nozzle, high speed nozzle, wedge;
-   extrusion welding;
-   heated tool welding: butt, saddle, socket, wedge;
-   electrofusion welding: socket, saddle;
-   solvent welding: socket.
This document applies to the welding of the following products:
-   sheet;
-   pipe;
-   fittings;
-   lining membrane.
This document covers the welding of the following groups of materials:
a)   for sheets, pipes and fittings:
-   group 1: PVC (including all kinds of PVC-U, PVC-C) or ABS;
-   group 2: PP (including all kinds of PP);
-   group 3: PE (including all kinds of PE);
-   group 4: PVDF;
-   group 5: ECTFE or PFA or FEP;
b)   for lining membranes and flooring:
-   group 6: PVC-P;
-   group 7: PE (including all kinds of PE);
-   group 8: ECB;
-   group 9: PP.
c)   for pipes and fittings only:
-   group 10: PA-U 11 or PA-U 12.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25239-3:2020(Main)
Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020)
EN ISO 25239-3:2020

This document specifies requirements for the qualification of welding operators for friction stir welding
(FSW) of aluminium. In this document, the term “aluminium” refers to aluminium and its alloys.
This document does not apply to “operators” as defined in ISO 25239-1.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13067:2020(Main)
Platics welding personnel - Qualfication of welders - Thermoplastics welded assemblies
EN 13067:2020

This document specifies the method of testing the knowledge and skill of a welder who is required to carry out welds on thermoplastics in new constructions and repair work.
The skill examination of a welder is an essential condition for the assurance of the quality of the welding work.
The application of this document guarantees that the examination is carried out according to a uniform test procedure.
This document applies when the contractor or the authorities responsible for the application require it.
Gas and water utility network industries with alternative qualification programmes are excluded from this document.
This document applies to the following welding processes:
-   hot gas welding: round nozzle, high speed nozzle, wedge;
-   extrusion welding;
-   heated tool welding: butt, saddle, socket, wedge;
-   electrofusion welding: socket, saddle;
-   solvent welding: socket.
This document applies to the welding of the following products:
-   sheet;
-   pipe;
-   fittings;
-   lining membrane.
This document covers the welding of the following groups of materials:
a)   for sheets, pipes and fittings:
-   group 1: PVC (including all kinds of PVC-U, PVC-C) or ABS;
-   group 2: PP (including all kinds of PP);
-   group 3: PE (including all kinds of PE);
-   group 4: PVDF;
-   group 5: ECTFE or PFA or FEP;
b)   for lining membranes and flooring:
-   group 6: PVC-P;
-   group 7: PE (including all kinds of PE);
-   group 8: ECB;
-   group 9: PP.
c)   for pipes and fittings only:
-   group 10: PA-U 11 or PA-U 12.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17279-2:2019(Main)
Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018)
EN ISO 17279-2:2018

This International Standard specifies the requirements for the qualification for welding and testing personnel of micro-joining of 2G HTS to fulfil the ISO 17279-1 and ISO 17279-3 requirements.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-1:2018(Main)
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 9606-1:2017

ISO 9606-1:2012 specifies the requirements for qualification testing of welders for fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
When qualifying welders, the emphasis is placed on the welder's ability manually to manipulate the electrode, welding torch or welding blowpipe, thereby producing a weld of acceptable quality.
The welding processes referred to in ISO 9606-1:2012 include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    45 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15618-1:2016(Main)
Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2016)
EN ISO 15618-1:2016

This standard applies to welding processes where the skill of the diver-welder has a significant influence on weld
quality.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and
certification for the approval testing of diver-welder performance for the welding of steels underwater in hyperbaric
wet environment. The recommended format for the certificate of approval testing is given in Annex A.
During the approval test the diver-welder should be required to show adequate practical experience and job
knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be
approved, information on these aspects is given in Annex B.
This standard is applicable when the diver-welder's testing is required by the purchaser, by inspection authorities or
by other organisations.
The welding processes referred to in this standard include those fusion welding processes which are designated as
manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2).
All new approvals should be in accordance with this standard from the date of this issue.
However, this standard does not invalidate previous diver-welder approvals made to former national standards or
specifications, providing the intent of the technical requirements is satisfied and the previous approvals are relevant
to the application and production work on which they are employed.
Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary
to do the additional tests on a test piece which should be made in accordance with this standard.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-2:2005(Main)
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 9606-2:2004

This European Standard specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys.
This European Standard provides a set of technical rules for systematic qualification of welders which are independent of product type, location and examiner/examining body.
When qualifying welders, the emphasis is placed on the welder's ability to manually manipulate the welding torch and thereby produce a weld of acceptable quality.
The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not qualify fully mechanized and automated welding processes (see EN 1418 or ISO 14732).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15618-2:2003(Main)
Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001)
EN ISO 15618-2:2001

This standard applies to welding processes where the skill of the diver-welder or welding operator has a significant
influence on weld quality.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and
certification for the approval testing of diver-welder or welding operator performance for the welding of steels
underwater in a hyperbaric dry environment.  The recommended format for the certificate of approval testing is given
in Annex A.
During the approval test the diver-welder or welding operator should be required to show adequate practical
experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for
which he is to be approved, information on these aspects is given in Annex B.
This standard is applicable when the diver-welder s or welding operator s approval testing is required by the
purchaser, by inspection authorities or by other organisations.
The welding processes referred to in this standard include fusion welding processes which are designated as manual
or partly mechanized welding for diver-welders and fully mechanized or automatic welding for operators (see 5.2).
All new approvals are in accordance with this standard from the date of this issue.
However, this standard does not invalidate previous diver-welder or welding operator approvals made to former
national standards or specifications, providing the intent of the technical requirements is satisfied and the previous
approvals are relevant to the application and production work on which they are to be employed.
Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary
to do the additional tests on a test piece which should be made in accordance with this standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-5:2001(Main)
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
EN ISO 9606-5:2000

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of titanium and zirconium. This standard applies to the approval testing of welders for the fusion welding of titanium and zirconium. This standard is intended to provide basis for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9606-4:1999(Main)
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN ISO 9606-4:1999

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper.  This standard applies to the approval testing of welders for the fusion welding of copper.  This standard is intended to provide the basics for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied.  During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.  This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations.  The welding processes referred to in this standard include those fusion welding proceses which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2).  This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4.  The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day