Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)

This European Standard specifies the requirements for qualification of welders for fusion welding of aluminium and aluminium alloys.
This European Standard provides a set of technical rules for systematic qualification of welders which are independent of product type, location and examiner/examining body.
When qualifying welders, the emphasis is placed on the welder's ability to manually manipulate the welding torch and thereby produce a weld of acceptable quality.
The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. It does not qualify fully mechanized and automated welding processes (see EN 1418 or ISO 14732).

Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)

Epreuve de qualification des soudeurs - Soudage par fusion - Partie 2 : Aluminium et alliages d'aluminium (ISO 9606-2:2004)

Le présent document définit les exigences relatives a la qualification des soudeurs pour le soudage par fusion de
l?aluminium et des alliages d?aluminium.
Le présent document fournit un ensemble de regles techniques pour l?épreuve de qualification systématique des
soudeurs qui sont indépendantes du type de produit, du lieu et de l?examinateur ou de l?organisme d?examen.
Lors de la qualification des soudeurs, l?accent est porté sur l?aptitude du soudeur a guider manuellement la torche
de soudage afin de produire une soudure de qualité acceptable.
Les procédés de soudage concernés par le présent document sont les procédés de soudage par fusion désignés
en tant que, manuels ou semi-automatiques. Il ne traite pas des procédés de soudage totalement mécanisés et
automatisés (voir l?EN 1418 ou l?ISO 14732).

Preskušanje varilcev - Talilno varjenje - 2. del: Aluminij in aluminijeve zlitine (ISO 9606-2:2004)

General Information

Status
Published
Publication Date
28-Feb-2005
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2005
Due Date
01-Mar-2005
Completion Date
01-Mar-2005

Relations

Buy Standard

Standard
EN ISO 9606-2:2005
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9606-2:2005
01-marec-2005
1DGRPHãþD
SIST EN 287-2:1996
SIST EN 287-2:1996/A1:2001
Preskušanje varilcev - Talilno varjenje - 2. del: Aluminij in aluminijeve zlitine (ISO
9606-2:2004)
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
(ISO 9606-2:2004)
Prüfung von Schweißern - Schmelzschweißen - Teil 2: Aluminium und
Aluminiumlegierungen (ISO 9606-2:2004)
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 2 : Aluminium et
alliages d'aluminium (ISO 9606-2:2004)
Ta slovenski standard je istoveten z: EN ISO 9606-2:2004
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 9606-2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 9606-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2004
ICS 25.160.10 Supersedes EN 287-2:1992
English version
Qualification test of welders - Fusion welding - Part 2: Aluminium
and aluminium alloys (ISO 9606-2:2004)
Epreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 2:
fusion - Partie 2 : Aluminium et alliages d'aluminium (ISO Aluminium und Aluminiumlegierungen (ISO 9606-2:2004)
9606-2:2004)
This European Standard was approved by CEN on 23 September 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9606-2:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 9606-2:2004 (E)
Contents
page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Symbols and abbreviated terms .7
4.1 General.7
4.2 Reference numbers of welding processes .7
4.3 Abbreviations.8
5 Essential variables and range of qualification .8
5.1 General.8
5.2 Welding processes .9
5.3 Product type .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.