SIST EN ISO 11299-1:2013
(Main)Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2011)
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2011)
This part of ISO 11299 specifies the requirements and test methods for plastics piping systems for use in therenovation of underground gas supply networks. It is applicable to pipes and fittings as manufactured, as well asto the installed lining system. It is not applicable to sprayed coatings, the existing pipeline or any annular filler. This part of ISO 11299 establishes the general requirements common to all relevant renovation techniques.
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten Gasversorgungsnetzwerken - Teil 1: Allgemeines (ISO 11299-1:2011)
Dieser Teil von ISO 11299 legt die Anforderungen und Prüfverfahren für Kunststoff-Rohrleitungssysteme fest, die für die Renovierung von erdverlegten Gasversorungsnetzwerken verwendet werden. Sie gilt sowohl für vorgefertigte Rohre und Formstücke, als auch für das eingebaute Lining-System. Diese Norm gilt nicht für aufgespritzte Beschichtungen, die bestehenden Rohrleitungen oder Ringraumverfüllungen.
Dieser Teil von ISO 11299 legt die allgemeinen Anforderungen an alle maßgeblichen Renovierungstechniken fest.
Systèmes de canalisations en plastique pour la rénovation des réseaux de gaz enterrés - Partie 1: Généralités (ISO 11299-1:2011)
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za oskrbo s plinom - 1. del: Splošno (ISO 11299-1:2011)
Ta del standarda ISO 11299 določa zahteve in preskusne metode za cevne sisteme iz polimernih materialov za uporabo pri obnovi podzemnih omrežij za oskrbo s plinom. Uporablja se za cevi in fitinge, kot so izdelani, ter za nameščene sisteme oblaganja. Ne uporablja se za razpršene obloge, obstoječe cevovode ali kakršno koli obročasto polnilo. Ta del standarda ISO 11299 določa splošne zahteve, ki so skupne vsem ustreznim tehnikam obnove.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11299-1:2013
01-april-2013
1DGRPHãþD
SIST EN 14408-1:2005
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za oskrbo s
plinom - 1. del: Splošno (ISO 11299-1:2011)
Plastics piping systems for renovation of underground gas supply networks - Part 1:
General (ISO 11299-1:2011)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten
Gasversorgungsnetzwerken - Teil 1: Allgemeines (ISO 11299-1:2011)
Systèmes de canalisations en plastique pour la rénovation des réseaux de gaz enterrés -
Partie 1: Généralités (ISO 11299-1:2011)
Ta slovenski standard je istoveten z: EN ISO 11299-1:2013
ICS:
83.140.30 Cevi, fitingi in ventili iz Plastics pipes, fittings and
polimernih materialov valves
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
SIST EN ISO 11299-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11299-1:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 11299-1:2013
EUROPEAN STANDARD
EN ISO 11299-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2013
ICS 23.040.20; 23.040.45; 75.200 Supersedes EN 14408-1:2004
English Version
Plastics piping systems for renovation of underground gas
supply networks - Part 1: General (ISO 11299-1:2011)
Systèmes de canalisations en plastique pour la rénovation Kunststoff-Rohrleitungssysteme für die Renovierung von
des réseaux de gaz enterrés - Partie 1: Généralités (ISO erdverlegten Gasversorgungsnetzwerken - Teil 1:
11299-1:2011) Allgemeines (ISO 11299-1:2011)
This European Standard was approved by CEN on 5 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11299-1:2013: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 11299-1:2013
EN ISO 11299-1:2013 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 11299-1:2013
EN ISO 11299-1:2013 (E)
Foreword
The text of ISO 11299-1:2011 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings
and valves for the transport of fluids” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO 11299-1:2013 by Technical Committee CEN/TC 155 “Plastics piping systems and
ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at
the latest by August 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14408-1:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11299-1:2011 has been approved by CEN as EN ISO 11299-1:2013 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 11299-1:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 11299-1:2013
INTERNATIONAL ISO
STANDARD 11299-1
First edition
2011-09-15
Plastics piping systems for renovation of
underground gas supply networks
Part 1:
General
Systèmes de canalisations en plastique pour la rénovation des réseaux
de gaz enterrés — Partie 1: Généralités
Reference number
ISO 11299-1:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
Contents Page
Foreword . v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Techniques . 3
3.3 Characteristics . 4
3.4 Materials . 5
3.5 Product stages . 5
3.6 Service conditions . 6
4 Symbols and abbreviated terms . 6
4.1 Symbols . 6
4.2 Abbreviated terms . 6
5 Pipes at the “M” stage . 6
5.1 Materials . 6
5.2 General characteristics . 6
5.3 Material characteristics . 7
5.4 Geometric characteristics . 7
5.5 Mechanical characteristics . 7
5.6 Physical characteristics . 7
5.7 Jointing . 7
5.8 Marking . 7
6 Fittings at the “M” stage . 7
6.1 Materials . 7
6.2 General characteristics . 8
6.3 Material characteristics . 8
6.4 Geometric characteristics . 8
6.5 Mechanical characteristics . 8
6.6 Physical characteristics . 8
6.7 Jointing . 8
6.8 Marking . 8
7 Ancillary components . 8
8 Fitness for purpose of the installed lining system at the “I” stage . 9
8.1 Materials . 9
8.2 General characteristics . 9
8.3 Material characteristics . 9
8.4 Geometric characteristics . 9
8.5 Mechanical characteristics . 9
8.6 Physical characteristics .10
8.7 Additional characteristics .10
8.8 Sampling .10
9 Installation practice .10
9.1 Preparatory work .10
9.2 Storage, handling and transport of pipes and fittings .10
9.3 Equipment .10
9.4 Installation . 11
9.5 Process-related inspection and testing . 11
9.6 Lining termination . 11
9.7 Reconnecting to the existing pipeline system .12
9.8 Transfer of service lines .12
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
9.9 Final inspection and testing .12
9.10 Documentation .12
Bibliography .13
iv © ISO 2011 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11299-1 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the
transport of fluids.
ISO 11299 consists of the following parts, under the general title Plastics piping systems for renovation of
underground gas supply networks:
— Part 1: General
— Part 3: Lining with close-fit pipes
© ISO 2011 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
Introduction
This part of ISO 11299 is a part of a system standard for plastics piping systems of various materials used for
the renovation of existing pipelines in a specified application area. System standards for renovation deal with
the following applications:
— plastics piping systems for renovation of underground non-pressure drainage and sewerage networks;
— plastics piping systems for renovation of underground drainage and sewerage networks under pressure;
— plastics piping systems for renovation of underground water supply networks;
— plastics piping systems for renovation of underground gas supply networks (this application).
These system standards are distinguished from those for conventionally installed plastics piping systems
because they set requirements for certain characteristics in the as-installed condition, after site processing.
This is in addition to specifying requirements for system components, as manufactured.
Each of the system standards comprises a Part 1: General (this document) and all applicable parts relating to
the renovation technique family, from the following:
— Part 2: Lining with continuous pipes
— Part 3: Lining with close-fit pipes
— Part 4: Lining with cured-in-place pipes
— Part 6: Lining with adhesive-backed hoses
The requirements for any given renovation technique family are specified in this part of ISO 11299 and are
applied in conjunction with the other relevant parts. For example, both this part of ISO 11299 and ISO 11299-3
specify the requirements relating to lining with close-fit pipes. For complementary information, see ISO 11295.
Not all technique families are pertinent to every area of application and this is reflected in the part numbers
included in each system standard.
A consistent structure of clause headings has been adopted for all parts in ISO 11299, in order to facilitate
direct comparisons across renovation technique families.
Figure 1 illustrates the common part and clause structure and the relationship between ISO 11299 and the
system standards for other application areas.
vi © ISO 2011 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
Figure 1 — Format of the renovation system standards
© ISO 2011 – All rights reserved vii
---------------------- Page: 13 ----------------------
SIST EN ISO 11299-1:2013
---------------------- Page: 14 ----------------------
SIST EN ISO 11299-1:2013
INTERNATIONAL STANDARD ISO 11299-1:2011(E)
Plastics piping systems for renovation of underground gas
supply networks
Part 1:
General
1 Scope
This part of ISO 11299 specifies the requirements and test methods for plastics piping systems for use in the
renovation of underground gas supply networks. It is applicable to pipes and fittings as manufactured, as well as
to the installed lining system. It is not applicable to sprayed coatings, the existing pipeline or any annular filler.
This part of ISO 11299 establishes the general requirements common to all relevant renovation techniques.
2 Normative references
There are no general normative references.
NOTE See other parts of ISO 11299 for the normative references applicable to specific renovation technique families.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 General
3.1.1
pipeline system
interconnecting pipe network for the conveyance of fluids
3.1.2
rehabilitation
all measures for restoring or upgrading the performance of an existing pipeline system
3.1.3
renovation
work incorporating all or part of the original fabric of the pipeline by means of which its current performance is
improved
3.1.4
replacement
rehabilitation of an existing pipeline system by the installation of a new pipeline system, without incorporating
the original fabric
3.1.5
maintenance
keeping an existing pipeline system operational without the installation of additional fabric
3.1.6
repair
rectification of local damage
© ISO 2011 – All rights reserved 1
---------------------- Page: 15 ----------------------
SIST EN ISO 11299-1:2013
ISO 11299-1:2011(E)
3.1.7
lining pipe
pipe inserted for renovation purposes
3.1.8
liner
lining pipe after installation
3.1.9
lining system
lining pipe and all relevant fittings for insertion into an existing pipeline for the purposes of renovation
3.1.10
renovated pipeline system
existing pipeline system plus the installed lining system used to renovate it, plus any grout or other annular
filling material used
3.1.11
characteristic
property, dimension or other feature of a material or component
3.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.