SIST EN 60286-3-1:2009

Packaging of components for automatic handling - Part 3-1: Packaging of surface mount components on continuous tapes - Type V - Pressed carrier tapes (IEC 60286-3-1:2009)

This part of IEC 60286 is applicable to the taping of surface mount components using carrier tapes which have concave cavities ed by compression of the base material.

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 3-1: Gurtung von oberflächenmontierbaren Bauelementen auf Endlosgurten - Typ V - Geprägte Trägergurte (IEC 60286-3-1:2009)

Emballage de composants pour opérations automatisées - Partie 3-1: Emballage des composants appropriés au montage en surface en bandes continues - Type V - Bandes porteuses pressées (CEI 60286-3-1:2009)

Pakiranje komponent za avtomatično ravnanje - 3-1. del: Pakiranje komponent za površinsko montažo na neprekinjene trakove - Tip V - Stisnjeni nosilni trakovi (IEC 60286-3-1:2009)

General Information

• Status: Withdrawn
• Publication Date: 20-Sep-2009
• Withdrawal Date: 04-Jul-2016
• ICS: 31.020 - Electronic components in general
• ICS: 55.060 - Spools. Bobbins
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Jun-2016
• Due Date: 07-Jul-2016
• Completion Date: 05-Jul-2016
• Ref Project: EN 60286-3-1:2009 - Packaging of components for automatic handling – Part 3-1: Packaging of surface mount components on continuous tapes - Type V - Pressed carrier tapes

Relations

• Replaced By: SIST EN 60286-3:2013 - Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 60286-3:2013 - Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60286-3-1:2009
01-oktober-2009
3DNLUDQMHNRPSRQHQW]DDYWRPDWLþQRUDYQDQMHGHO3DNLUDQMHNRPSRQHQW]D
SRYUãLQVNRPRQWDåRQDQHSUHNLQMHQHWUDNRYH7LS96WLVQMHQLQRVLOQLWUDNRYL,(&

Packaging of components for automatic handling - Part 3-1: Packaging of surface mount
components on continuous tapes - Type V - Pressed carrier tapes (IEC 60286-3-1:2009)
Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 3-
1: Gurtung von oberflächenmontierbaren Bauelementen auf Endlosgurten - Typ V -
Geprägte Trägergurte (IEC 60286-3-1:2009)
Emballage de composants pour opérations automatisées - Partie 3-1: Emballage des
composants appropriés au montage en surface en bandes continues - Type V - Bandes
porteuses pressées (CEI 60286-3-1:2009)
Ta slovenski standard je istoveten z: EN 60286-3-1:2009
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.060 Tulci. Vretena Spools. Bobbins
SIST EN 60286-3-1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60286-3-1:2009

---------------------- Page: 2 ----------------------

SIST EN 60286-3-1:2009

EUROPEAN STANDARD
EN 60286-3-1

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 31.020; 31.240


English version


Packaging of components for automatic handling -
Part 3-1: Packaging of surface mount components on continuous tapes -
Type V -
Pressed carrier tapes
(IEC 60286-3-1:2009)


Emballage de composants pour Gurtung und Magazinierung
opérations automatisées - von Bauelementen
Partie 3-1: Emballage des composants für automatische Verarbeitung -
appropriés au montage Teil 3-1: Gurtung
en surface en bandes continues - von oberflächenmontierbaren
Type V - Bandes porteuses pressées Bauelementen auf Endlosgurten -
(CEI 60286-3-1:2009) Typ V -
Geprägte Trägergurte
(IEC 60286-3-1:2009)



This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60286-3-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60286-3-1:2009
EN 60286-3-1:2009 – 2 –
Foreword
The text of document 40/1972/FDIS, future edition 1 of IEC 60286-3-1, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60286-3-1 on 2009-07-01.
This European Standard is to be used in conjunction with EN 60286-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60286-3-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60286-3-1:2009
– 3 – EN 60286-3-1:2009

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60286-3 2007 Packaging of components for automatic EN 60286-3 2007
handling -
Part 3: Packaging of surface mount
components on continuous tapes

---------------------- Page: 5 ----------------------

SIST EN 60286-3-1:2009

---------------------- Page: 6 ----------------------

SIST EN 60286-3-1:2009
IEC 60286-3-1
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD


Packaging of components for automatic handling –
Part 3-1: Packaging of surface mount components on continuous tapes –
Type V – Pressed carrier tapes


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 31.020; 31.240 ISBN 2-8318-1039-5
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 60286-3-1:2009
– 2 – 60286-3-1 © IEC:2009(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 General .5
1.1 Scope.5
1.2 Normative references .5
2 Terms and definitions .5
3 Tape dimensions .6
4 Polarity and orientation of components in the tape .8
5 Fixing of components and additional tape requirements.8
5.1 Specific requirements for Type V tapes .8
5.1.1 Minimum bending radius.8
5.1.2 Measurement method for carrier tape thickness (T and T ) .8
3
5.1.3 Measurement method for cavity (A and B ) .9
0 0
5.1.4 Measurement method for Cavity depth (dimension K ).9
0
6 Packing .10
7 Marking .10
Annex A (informative) Specific requirements for Type V .11

Figure 1 – Sectional view of component cavity.6
Figure 2 – Dimensions .6
Figure 3 – Maximum allowed pocket offset.6
Figure 4 – Maximum component tilt, rotation and lateral movement .7
Figure 5 – Carrier tape thickness sectional .9
Figure 6 – Cavity cross-section.9
Figure 7 – Cavity depth dimension .10
Figure A.1 – Movement of components within the cavity .11

Table 1 – Constant dimensions of 8 mm pressed carrier tape .7
Table 2 – Variable dimensions of 8 mm pressed carrier tape .8
Table A.1 – Recommended dimension tolerances of cavity .12
Table A.2 – Peel force .12

---------------------- Page: 8 ----------------------

SIST EN 60286-3-1:2009
60286-3-1 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 3-1: Packaging of surface mount components on continuous tapes –
Type V – Pressed carrier tapes


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents
...