iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14450:2018+A1:2024

(Main)

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

This document establishes the basis for testing and classifying secure cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke

Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de résistance à l'effraction - Armoires et mobilier de sécurité

Le présent document spécifie les conditions d’essai et de classification des armoires et mobilier de sécurité.
La présente norme s’applique aux produits destinés à des applications nécessitant un niveau de résistance de sécurité inférieur à celui mesuré par l’EN 1143 1. En règle générale, ces produits sont utilisés dans des situations où les risques sont moins élevés.

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - Varnostne omare

Ta dokument določa osnovo za preskušanje in klasifikacijo varnostnih omar. Standard vključuje izdelke za primere, kjer je zahtevana protivlomna varnost manjša od tiste, izmerjene v skladu s standardom EN 1143-1. Običajno se ti izdelki uporabljajo v situacijah z manjšim tveganjem.

General Information

Status
Published
Publication Date
17-Jan-2024
ICS
13.310 - Protection against crime
35.220.99 - Other data storage devices
Technical Committee
PPV - Secure storage units and door locks
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Dec-2023
Due Date
11-Feb-2024
Completion Date
18-Jan-2024
Ref Project
EN 14450:2017+A1:2023 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

Relations

Merged From
SIST EN 14450:2018 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
Effective Date
01-Feb-2024
Consolidates
SIST EN 14450:2018/kprA1:2023 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
Effective Date
01-Feb-2024

Buy Standard

EN 14450:2018+A1:2024EN 14450:2018+A1:2024
PreviousNext
Standard
EN 14450:2018+A1:2024
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14450:2018+A1:2024
01-februar-2024
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja
protivlomne odpornosti - Varnostne omare
Secure storage units - Requirements, classification and methods of test for resistance to
burglary - Secure cabinets
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des
Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke
Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de
résistance à l'effraction - Armoires et mobilier de sécurité
Ta slovenski standard je istoveten z: EN 14450:2017+A1:2023
ICS:
13.310 Varstvo pred kriminalom Protection against crime
35.220.99 Druge naprave za Other data storage devices
shranjevanje podatkov
SIST EN 14450:2018+A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14450:2018+A1:2024

---------------------- Page: 2 ----------------------
SIST EN 14450:2018+A1:2024


EN 14450:2017+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 13.310 Supersedes EN 14450:2017
English Version

Secure storage units - Requirements, classification and
methods of test for resistance to burglary - Secure cabinets
Unités de stockage en lieu sûr - Exigences, Wertbehältnisse - Anforderungen, Klassifizierung und
classification et méthodes d'essai de résistance à Methoden zur Prüfung des Widerstandes gegen
l'effraction - Armoires et mobilier de sécurité Einbruchdiebstahl - Sicherheitsschränke
This European Standard was approved by CEN on 16 July 2017 and includes Amendment approved by CEN on 22 October 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14450:2017+A1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14450:2018+A1:2024
EN 14450:2017+A1:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Classification and requirements . 6
4.1 Classification . 6
4.2 Requirements . 6
5 Technical Documentation . 8
6 Test specimen . 9
7 Tool attack test . 9
7.1 Tool attacks .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15659:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
EN 15659:2019

This European Standard specifies requirements for light fire storage units providing protection against fire.
The method of test is specified to determine the ability of light fire storage units to protect paper media from the effects of fire. Two levels of fire exposure periods (LFS 30 P and LFS 60 P) are specified using the maximum temperature increase permitted within the storage space of the light fire storage unit.
Requirements are also specified for the test specimen, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the light fire storage units from the test results is also given (see Table 1).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1047-1:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and data inserts
EN 1047-1:2019

This part of this European Standard specifies requirements for fire resisting data cabinets and diskette inserts.
Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.
Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2).
Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1).
Diskette inserts should only be installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in accordance with 5.1.2. Where several inserts are installed, they should be built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts should not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance.
The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet (∆T_A∙K) should not exceed the temperature increase of the tested data cabinet (∆T_B∙K) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert (∆T_i∙K) and the maximum admissible temperature increase (30 K), i.e ∆T_A- ∆T_B≤30 K- ∆T_i (See example in Annex B).
A description of the installation of the diskette inserts should be given in the technical documentation of the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1047-2:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
EN 1047-2:2019

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified.
Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, as test procedures as well as the series production.
In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1).
As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container.
Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7.
NOTE   This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, the respective national requirements should be considered.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1143-1:2019(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
EN 1143-1:2019

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1143-2:2014(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
EN 1143-2:2014

EN 1143-2 specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits. This European Standard comprises two types of deposit system: - night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe. - deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this standard is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company. Parts of a Deposit system are a receiving unit, an input unit and in some cases, a chute. The standard includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this standard. Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included. This standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14450:2018/kprA1:2023(Amendment)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
EN 14450:2017/FprA1

This document establishes the basis for testing and classifying secure safe cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1047-2:2009/kFprA1:2012(Amendment)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
EN 1047-2:2009/FprA1

Data rooms and data containers are fire protection security products whose purpose is to protect temperature and humidity sensitive data media and hardware systems from the effects of fire. These fire resistance products do not provide any defined protection against burglary.
Based on these objectives, the CEN/TC 263 Working Group WG2 Fire Resistance unanimously noted at its meeting on 8 March 2012 that the requirement for a certified high security lock according to EN 1300 for data rooms and data containers suggests protection that is not provided and does not reflect the requirements of the market.
For the reasons explained above, WG2 unanimously recommended deletion of the requirements for a certified high security lock according to EN 1300 without replacement from EN 1047-2:2009. In the interest of the market, this change in this European Standard shall be implemented very soon via an Amendment to EN 1047-2:2009. The necessary decision shall be taken in a 3 months shortened UAP. The necessary application shall be filed with the CEN/TC 263 via DIN.
The draft for Amendment A1 to EN 1047-2:2009 shall be presented to the CEN/TC 263 together with the application for changes in this European Standard.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15659:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
EN 15659:2019

This European Standard specifies requirements for light fire storage units providing protection against fire.
The method of test is specified to determine the ability of light fire storage units to protect paper media from the effects of fire. Two levels of fire exposure periods (LFS 30 P and LFS 60 P) are specified using the maximum temperature increase permitted within the storage space of the light fire storage unit.
Requirements are also specified for the test specimen, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the light fire storage units from the test results is also given (see Table 1).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1047-1:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and data inserts
EN 1047-1:2019

This part of this European Standard specifies requirements for fire resisting data cabinets and diskette inserts.
Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.
Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2).
Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1).
Diskette inserts should only be installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in accordance with 5.1.2. Where several inserts are installed, they should be built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts should not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance.
The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet (∆T_A∙K) should not exceed the temperature increase of the tested data cabinet (∆T_B∙K) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert (∆T_i∙K) and the maximum admissible temperature increase (30 K), i.e ∆T_A- ∆T_B≤30 K- ∆T_i (See example in Annex B).
A description of the installation of the diskette inserts should be given in the technical documentation of the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1047-2:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
EN 1047-2:2019

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified.
Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, as test procedures as well as the series production.
In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1).
As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container.
Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7.
NOTE   This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, the respective national requirements should be considered.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day