Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets

This document establishes the basis for testing and classifying secure safe cabinets.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke

Auf der Grundlage dieses Dokuments werden Sicherheitsschränke geprüft und klassifiziert.
Die Norm deckt Produkte für Anwendungen, deren Sicherheitsanforderungen unterhalb der EN 1143-1 liegen, ab. Das Einsatzgebiet der Produkte ist üblicherweise in Bereichen mit geringem Angriffsrisiko.

Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes de test pour la resistance à l'effraction - Compartiment de sécurité

Le présent document spécifie les conditions d’essai et de classification des coffres domestiques.

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - Varnostne omare

Ta dokument določa osnovo za preskušanje in klasifikacijo varnostnih omar.

General Information

Status
Published
Public Enquiry End Date
02-Mar-2016
Publication Date
11-Dec-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Nov-2017
Due Date
14-Jan-2018
Completion Date
12-Dec-2017

RELATIONS

Buy Standard

Standard
SIST EN 14450:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - Varnostne omareWertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - SicherheitsschränkeUnités de stockage en lieux sûrs - Prescriptions, classification et méthodes de test pour la resistance à l'effraction - Compartiment de sécuritéSecure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets35.220.99Druge naprave za shranjevanje podatkovOther data storage devices13.310Varstvo pred kriminalomProtection against crimeICS:Ta slovenski standard je istoveten z:EN 14450:2017SIST EN 14450:2018en,fr,de01-januar-2018SIST EN 14450:2018SLOVENSKI

STANDARDSIST EN 14450:20051DGRPHãþD
SIST EN 14450:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14450
November
t r s y ICS
s uä u s r Supersedes EN
s v v w rã t r r wEnglish Version

Secure storage units æ Requirementsá classification and methods of test for resistance to burglary æ Secure safe cabinets Unités de stockage en lieu sûr æ Exigencesá classification et méthodes d 5essai de résistance à l 5effraction æ Coffres domestiques

Wertbehältnisse æ Anforderungená Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl æ Sicherheitsschränke This European Standard was approved by CEN on

s x July
t r s yä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s v v w rã t r s y ESIST EN 14450:2018

EN 14450:2017 (E) 2 Contents Page European foreword ....................................................................................................................................... 3 Introduction .................................................................................................................................................... 4 1 Scope .................................................................................................................................................... 5 2 Normative references .................................................................................................................... 5 3 Terms and definitions ................................................................................................................... 5 4 Classification and requirements ................................................................................................ 6 4.1 Classification ..................................................................................................................................... 6 4.2 Requirements ................................................................................................................................... 6 5 Technical Documentation ............................................................................................................ 7 6 Test specimen ................................................................................................................................... 8 7 Tool attack test ................................................................................................................................. 8 7.1 Tool attacks ....................................................................................................................................... 8 7.1.1 Tool list ............................................................................................................................................... 8 7.1.2 Tool attack procedure ................................................................................................................... 9 7.1.3 Timing .............................................................................................................................................. 10 7.1.4 Test criteria .................................................................................................................................... 11 7.2 Testing programme ..................................................................................................................... 11 7.2.1 Free-standing cabinets ............................................................................................................... 11 7.2.2 Wall or floor cabinets ................................................................................................................. 11 7.2.3 Calculation of tool attack resistance ..................................................................................... 12 7.2.4 Completion of tool attack test .................................................................................................. 12 8 Anchoring strength test ............................................................................................................. 12 9 Test report ...................................................................................................................................... 13 10 Marking ............................................................................................................................................ 13 Annex A (normative) ................................................................................................................................. 14 Bibliography ................................................................................................................................................. 17

SIST EN 14450:2018

EN 14450:2017 (E) 3 European foreword This document (EN 14450:2017) has been prepared by Technical Committee CEN/TC 263 “Secure safe cabinets”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14450:2005. In comparison with EN 14450:2005, the following changes have been made: — updating introduction; — changing testing requirements regarding marking time (Clause 7.1.3.2) and anchoring (Clause 7.1.2.1); — size of the tool “wedge” changed in Clause 7.1.1; — a note was changed to a requirement and the test equipment shall now have a capacity of at least 30 kN (Clause 8); — editorial clarification of the positioning of anchoring holes (Clause 4.2.2); — editorial changes amongst others in Clauses 4.1, 7.1.2.4, 7.1.3, 7.1.4.6, 7.2, Table 1, Table 2 and Annex A). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14450:2018

EN 14450:2017 (E) 4 Introduction Tests are made and the results used to classify resistance to burglary. The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations. Secure safe cabinets aim to protect against burglars who typically have no specific information on the level of resistance offered by construction and are not prepared to take high risks. The burglar attempts to gain access to the cabinet using simple tools which they normally bring to access premises. To reflect this limitation the tools permitted in the type tests of this standard are mostly manual tools (“hand tools”). However for purpose of repeatability two mains driven tools are included: — electric drill (to eliminate power loss to battery state); — electric disc grinder (represents and replaces hammer and chisel testing to eliminate tester's fatigue and risk of injury especially in respect of the test conditions by counting the gross time). Depending on the criminal, the conditions at the place of crime and the availability of tools, considerably longer times are likely to occur in real burglar attacks than in a type test. It should be noted that results of manual testing are dependent of the skills of the testing team. It is therefore recommended that testing teams exchange skills and experience on a regular basis. There is no requirement under this standard to test for resistance to fraudulent access. SIST EN 14450:2018

EN 14450:2017 (E) 5 1 Scope This document establishes the basis for testing and classifying secure safe cabinets. The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1300, Secure storage units - Classification for high security locks according to their resistance to unauthorized opening 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1 secure safe cabinet storage unit which protects its content against burglary, which has at least one internal side

1 m length when closed, and the interior of which is accessed through a lockable door or lid 3.2 free-standing cabinet secure safe cabinet whose protection against burglary depends only upon the materials and construction of its primary manufacture and not upon materials added or attached during installation 3.3 wall cabinet secure safe cabinet for installation into a wall and whose protection against burglary is partly dependent upon the wall(s) and the materials added during installation 3.4 floor cabinet secure safe cabinet for installation into a floor and whose protection against burglary is partly dependent upon materials added during installation 3.5 working time time spent during testing during which one or more tools are used to create a change in the test specimen 3.6 gross time time from when a test is started to when the test is complete or abandoned 3.7 encasement material added at installation to protect and anchor wall cabinets and floor cabinets SIST EN 14450:2018

EN 14450:2017 (E) 6 3.8 tool points, TP numerical value assigned to test tool 3.9 security units, SU numerical value expressing resistance against burglary attack 4 Classification and requirements 4.1 Classification Secure safe cabinets are classified to a resistance level according to Table 1. Table 1 — Requirements for classification of secure safe cabinets

S1 S2 Minimum resistance for access 2,00 SU 5,00 SU Limit to number and type of tools used for testing 40 TP 60 TP Minimum strength per anchoring hole 20 kN 30 kN Minimum locking One lock to EN 1300 One lock to EN 1300 Gross attack time is limited as described in 7.2.4 b). 4.2 Requirements 4.2.1 There shall be no holes through the protection material other than those for locks, cables or anchoring. One cable hole is allowed, this shall not exceed 100 mm2. 4.2.2 A free-standing cabinet with a mass less than 1 000 kg shall have at least two holes by which it can be anchored. These holes shall be at one face or at two different faces through which it is to be anchored. The anchoring assembly for each anchoring hole shall sustain the minimum anchoring strength given in Table 1. 4.2.3 Secure safe cabinets shall be provided with operating and installation instructions, including instructions in respect of the locks and anchoring. For freestanding secure safe cabinets the installation instruction shall note that the cabinet shall be anchored on site through at least two of the anchoring holes (see 4.2.2). SIST EN 14450:2018

EN 14450:2017 (E) 7 5 Technical Documentation The technical documentation shall contain the following information: 5.1 Date of issue and the name of the manufacturer (or the name and status of the applicant requesting testing) shall be on each page. 5.2 Statement of the type and model number of secure safe cabinet, e.g. free-standing cabinet, wall cabinet or floor cabinet. 5.3 Drawings of the test specimen and documents giving the following: a) weight, outside and inside dimensions, and the manufacturing tolerances of the dimensions; b) horizontal and vertical cross-sections; c) the quantity, layout and features of locks, boltwork and relocking devices; d) the quantity, pitch and position of door bolts, their dimensions (e.g. cross-section), throw and engagement and their type (e.g. moving or fixed); e) the location and design of any local areas of special protection material; f) purpose, position and dimensions of any holes which pass through the protection material with details of any associated special protection; g) details of optional features, e.g. time locking and time delay locking; h) specification of the materials of construction. 5.4 Operating and installation instructions, including instructions in respect of the locks and anchoring. 5.5 In addition to 5.2, 5.3 and 5.4, for wall cabinets and floor cabinets the following information shall be provided: a) details of the recommended procedure for installation; b) drawing showing the recommended plane of door or lid in relation to the surface of the wall or floor into the cabinet is to be installed; c) details of encasement materials (see 3.7); d) recommendation for the proportion of the body to be encased and the thickness of the encasement; e) identification of any areas of the body which are not protected by material added at installation; 5.6 List of all locks that m

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.