iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 17867:2023/oprA1:2024

(Amendment)

Petrol fuel for small internal combustion engines - Requirements and test methods

Petrol fuel for small internal combustion engines - Requirements and test methods

This document specifies requirements on petrol fuel for use as fuel in small engines, together with the methods to be applied for testing these properties.
This document specifies requirements for two types of petrol fuel having low aromatics and sulfur content:
- one type for use in four-stroke engines with separate lubrication; and
- one mixed petrol fuel type for use in mixture-lubricated engines.
Testing the properties of the added engine oil is out of the scope of this document.
NOTE For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.

Benzin für Kleinmotoren - Anforderungen und Prüfverfahren

Essence pour petits moteurs à combustion interne - Exigences et méthodes d'essai

Bencinsko gorivo za male motorje z notranjim zgorevanjem - Zahteve in preskusne metode

Ta dokument določa zahteve za bencinsko gorivo, ki se uporablja kot gorivo v malih motorjih, skupaj z metodami, ki jih je treba uporabljati za preskušanje teh lastnosti.
Ta dokument določa zahteve za dve vrsti bencinskega goriva z nizko vsebnostjo aromatov in žvepla: eno vrsto za uporabo v štiritaktnih motorjih z ločenim mazanjem in eno vrsto mešanega bencinskega goriva za uporabo v motorjih z mazanjem z zmesjo.
Preskušanje lastnosti dodanega motornega olja ne spada na področje uporabe tega dokumenta.

General Information

Status
Not Published
Public Enquiry End Date
30-Jun-2024
ICS
75.160.20 - Liquid fuels
Technical Committee
NAD - Petroleum products, lubricants and related products
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
24-Apr-2024
Due Date
11-Sep-2024
Directive
98/70/EC - Quality of petrol and diesel fuels (Dir. 93/12/EEC amendment)
Ref Project
EN 17867:2023/prA1 - Petrol fuel for small internal combustion engines - Requirements and test methods

Relations

Amends
SIST EN 17867:2023 - Petrol fuel for small internal combustion engines - Requirements and test methods
Effective Date
01-Jun-2024

Buy Standard

EN 17867:2023/oprA1:2024EN 17867:2023/oprA1:2024
PreviousNext
Draft
EN 17867:2023/oprA1:2024
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17867:2023/oprA1:2024
01-junij-2024
Bencinsko gorivo za male motorje z notranjim zgorevanjem - Zahteve in preskusne
metode
Petrol fuel for small internal combustion engines - Requirements and test methods
Benzin für Kleinmotoren - Anforderungen und Prüfverfahren
Essence pour petits moteurs à combustion interne - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 17867:2023/prA1
ICS:
75.160.20 Tekoča goriva Liquid fuels
SIST EN 17867:2023/oprA1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17867:2023/oprA1:2024

---------------------- Page: 2 ----------------------
SIST EN 17867:2023/oprA1:2024


DRAFT
EUROPEAN STANDARD
EN 17867:2023
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
June 2024
ICS 75.160.20
English Version

Petrol fuel for small internal combustion engines -
Requirements and test methods
Essence pour petits moteurs à combustion interne - Ottokraftstoff für kleine Verbrennungsmotoren -
Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 19.

This draft amendment A1, if approved, will modify the European Standard EN 17867:2023. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17867:2023/prA1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17867:2023/oprA1:2024
EN 17867:2023/prA1:2024 (E)
Contents Page
European foreword . 3
1 Modification to the Introduction . 4
2 Modification to 3.3 . 4
3 Modification to 3.4 . 4
4 Modification to 3.5 . 4
5 Modification to Clause 4, Pump marking . 4
6 Modification to Clause 4, Pump marking . 5
7 Modification to Clause 4, Pump marking . 5
8 Modifications to 5.5, Table 1 . 5
9 Modification to 5.6, Climatically dependent requirements and test methods - Volatility
requirements . 5
10 Modification to 5.8.2, Information on test methods in case of dispute . 5
11 Modification to B.3, Precision .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 589:2024(Main)
Automotive fuels - LPG - Requirements and test methods
EN 589:2024

This document specifies requirements and test methods for marketed and delivered automotive liquefied petroleum gas (LPG), with LPG defined as low pressure liquefied gas composed of one or more light hydrocarbons which are assigned to UN 1011, 1075, 1965, 1969 or 1978 only and which consists mainly of propane, propene, butane, butane isomers, butenes with traces of other hydrocarbon gases.
This standard is applicable to automotive LPG for use in LPG engine vehicles designed to run on automotive LPG.
NOTE   For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ.
WARNING - Attention is drawn to the risk of fire and explosion when handling LPG and to the hazard to health arising through inhalation of excessive amounts of LPG.
LPG is a highly volatile hydrocarbon liquid which is normally stored under pressure. If the pressure is released large volumes of gas will be produced which form flammable mixtures with air over the range of approximately 2 % (V/V) to 10 % (V/V). This European Standard involves the sampling, handling and testing of LPG. Naked flames, unprotected electrical equipment electrostatic hazards etc. are sources of ignition for LPG.
LPG in liquid form can cause cold burns to the skin. The national health and safety regulations apply.
LPG is heavier than air and accumulates in cavities. There is a danger of suffocation when inhaling high concentrations of LPG.
CAUTION - One of the tests described in this European Standard involves the operator inhaling a mixture of air and LPG vapour. Particular attention is drawn to the cautionary statement provided in A.1, where this method is referred to.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16389:2024(Main)
Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
CEN/TR 16389:2023

This Technical Report explains the requirements and test methods for marketed and delivered paraffinic diesel from synthesis (XTL) or hydrotreatment (HVO) and of blends thereof with up to 7%(V/V) of fatty acid methyl esters (FAME) according to European fuel specifications. It provides background information to judge the final text of the European Standard EN 15940 and gives guidance and explanations to the producers, blenders, marketers and users of paraffinic automotive diesel.
Paraffinic diesel is a high quality, clean burning fuel with virtually no sulfur and aromatics. Paraffinic diesel fuel can be used in diesel engines, also to reduce regulated emissions. In order to have the greatest possible emissions reduction, a specific calibration may be necessary. Paraffinic diesel fuel can also offer a meaningful contribution to the target of increased non-crude derived and/or renewable content in transportation fuel pool.
For general diesel engine warranty, paraffinic automotive diesel fuel may need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines may still need to be done. The vehicle manufacturer needs to be consulted before use.
NOTE 1   This document is directly related to the development of EN 15940 and will be updated once further publications take place.
NOTE 2   Paraffinic diesel is also used as a blending component in automotive diesel fuel. In that case, composition and properties of the final blends are defined by relevant fuel specification standards.
NOTE 3   For the purposes of this document, the term "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17306:2024(Main)
Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation
EN 17306:2023

This document specifies a laboratory method for the determination of the distillation characteristics of light and middle distillates derived from petroleum and related products of synthetic or biological origin with initial boiling points above 20 °C and end-points below approximately 400 °C, at atmospheric pressure utilizing an automatic micro distillation apparatus.
This test method is applicable to such products as; light and middle distillates, automotive spark-ignition engine fuels, automotive spark-ignition engine fuels containing up to 20 % ethanol, aviation gasolines, aviation turbine fuels, (paraffinic) diesel fuels, FAME (B100), diesel blends up to 30 % fatty acid methyl esters (FAME), special petroleum spirits, naphtha’s, white spirits, kerosene’s, burner fuels, and marine fuels.
The test method is also applicable to hydrocarbons with a narrow boiling range, like organic solvents or oxygenated compounds.
The test method is designed for the analysis of distillate products; it is not applicable to products containing appreciable quantities of residual material.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16906:2023(Main)
Liquid petroleum products - Determination of the ignition quality of diesel fuels - Fixed compression ratio engine method
EN 16906:2023

This document specifies a test method for the determination of cetane numbers (“CN”) in diesel fuel, using a standard single cylinder, four-stroke cycle, indirect injection engine. The cetane number provides a measure of the ignition characteristics of diesel fuels in compression ignition engines. The cetane number is determined at constant speed in a compression ignition test engine equipped with a swirl chamber.
The cetane number scale covers the range from zero to 100, but typical testing is performed in the range from about 40 CN to about 75 CN. The precision of this test method covers the range from 44 CN to about 66 CN.
This document is applicable to distillate as well as paraffinic diesel fuels intended for use in diesel engines, including those containing fatty-acid methyl esters (FAME), ignition-improvers or other diesel fuel additives.
This engine test procedure may be used for other fuels such as synthetics and vegetable oils. However, samples with fuel properties that interfere with the gravity-based pre-supply pressure to the fuel pump e.g. due to high viscosity can only be used to a limited extent. Precision data for such fuels are not available at this stage. Precision data for paraffinic diesel fuels are currently under development.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12156-1:2023(Main)
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2023)
EN ISO 12156-1:2023

This document specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which could contain a lubricity-enhancing additive. It defines two methods for measurement of the wear scar; Method "A" — Digital camera, and Method "B" — Visual observation.
This test method applies to fuels used in diesel engines.
NOTE It is not known if this test method will predict the performance of all additive/fuel combinations, including paraffinic fuels for which no additional correlation testing has been performed. Nevertheless, no data has been presented to suggest that such fuels are not within scope.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17867:2023(Main)
Petrol fuel for small internal combustion engines - Requirements and test methods
EN 17867:2023

This document specifies requirements on petrol fuel for use as fuel in small engines, together with the methods to be applied for testing these properties.
This document specifies requirements for two types of petrol fuel being low in aromatics and sulphur: one type for use in four-stroke engines with separate lubrication and one mixed petrol fuel type for use in mixture-lubricated engines.
Testing the properties of the added engine oil is out of the scope of this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15691:2023(Main)
Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
EN 15691:2023

This European Standard specifies a procedure for the determination of dry residue in ethanol by gravimetric (desiccation) method in the range (10 to 25) mg/100 ml.
NOTE   In an interlaboratory study [2] the method described has been tested at levels down to 3,5 mg/100 ml, but the precision appeared to be insufficient at such low levels.
WARNING - Use of this document may involve hazardous equipment, materials and operations. This method does not purport to address to all of the safety problems associated with its use, but it is the responsibility of the user to search and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15940:2023(Main)
Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
EN 15940:2023

This European Standard describes requirements and test methods for marketed and delivered paraffinic diesel fuel containing a level of up to 7,0 % (V/V) fatty acid methyl ester (FAME). It is applicable to fuel for use in diesel engines and vehicles compatible with paraffinic diesel fuel. It defines two classes of paraffinic diesel fuel: high cetane and normal cetane.
Paraffinic diesel fuel originates from synthesis or hydrotreatment processes.
NOTE 1   For general diesel engine warranty, paraffinic automotive diesel fuel may need a validation step, which for some existing engines may still need to be done (see also the Introduction to this document). The vehicle manufacturer needs to be consulted before use.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction and the volume fraction.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15195:2023(Main)
Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 15195:2023

This European Standard specifies a test method for the quantitative determination of ignition delay of middle distillate fuels intended for use in compression ignition engines. The method utilizes a constant volume combustion chamber designed for operation by compression ignition, and employing direct injection of fuel into compressed air that is controlled to a specified pressure and temperature. An equation is given to calculate the derived cetane number (DCN) from the ignition delay measurement.
This European Standard is applicable to diesel fuels, including those containing fatty acid methyl esters (FAME) up to 30 % (V/V). The method is also applicable to middle distillate fuels of non-petroleum origin, oil-sands based fuels, blends of fuel containing biodiesel material, diesel fuel oils containing cetane number improver additives and low-sulfur diesel fuel oils. However, users applying this standard especially to unconventional distillate fuels are warned that the relationship between derived cetane number and combustion behaviour in real engines is not yet fully understood.
The test method is also applicable to the quantitative determination of the ignition characteristics of FAME, especially the ignition delay. However the correlation data available were inconclusive about the precision of the equation. So the determination of derived cetane number for FAME fuel, also known as B100, has not been included in the precision determination as in Clause 13 ).
This European Standard covers the ignition delay range from 2,8 ms to 6,3 ms (71 DCN to 34 DCN). The combustion analyser can measure shorter or longer ignition delays, but precision is not known. For these shorter or longer ignition delays the correlation equation for DCN is given in Annex D.
NOTE 1   There is no information about how DCNs outside the 34 to 71 range compares to EN ISO 5165.
NOTE 2   For the purpose of this European Standard, the expression “% (V/V)” is used to represent the volume fraction and “% (m/m)” the mass fraction.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16568:2023(Main)
Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
EN 16568:2023

This European Standard specifies a test method for the determination of the oxidation stability of fuels for diesel engines, by means of measuring the induction period of the fuel. The method is applicable to fatty acid methyl esters (FAME) intended for use as pure biofuel or as a blending component for diesel fuels, and to blends of FAME and petroleum-based diesel. This method presents a modified procedure towards the regular Rancimat technique (EN 15751) that allows a more rapid determination of the oxidation stability.
NOTE 1   The presence of cetane improver can reduce the oxidation stability determined by this test method. Limited studies with 2-ethyl hexyl nitrate (EHN) indicated, however, that the stability is reduced to an extent which is within the precision range of the test method.
NOTE 2   For the purposes of this European Standard, the term “% (V/V)” is used to represent the volume fraction (φ) of a material.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day